Earn money efficiently, follow up more than 10+platforms outsourcing needs in one stop

All Filters

Clear Data

Total of 114561 records

220.0 USD
Greetings, IMPORTANT INTRODUCTION: I am an experienced client of architectural and interior design work (mostly through other platforms). I follow a specific work sequence in order to minimize waste of time and effort on both the freelancer's side and my side. I also provide very detailed instructions and comments to minimize misunderstandings and waste of time and effort. KINDLY READ THE FOLLOWING CAREFULLY SCOPE OVERVIEW: This job involves interior design for a specific zone within a small villa as indicated in the attached image. It includes: Living/Dining Area Small Open Kitchen Small Kitchen Garden (near the Dining Area) The design shall include all flooring, wall cladding elements, ceiling design, decorative items, furniture, chandeliers, wall light fixtures, other lighting, curtains, wall paint, accessories, doors, open kitchen elements. DELIVERY TIME FOR FULL SCOPE: 30 days after job award REQUIRED DELIVERABLES (for final approved design): 1- Six (6) different 3D renderings (high resolution photo realistic) of the final design covering all areas in the zone from the different angles and zooms that I will decide at the right time prior to creating these 3D renderings. 2- Three (3) 2D elevation drawings for 3 walls/sides of the Living/Dining Area (after approval of final design). These elevation drawings shall provide detailed measurements of the heights and widths of all elements against these 3 walls/sides, including but not limited to wall cladding elements, art paintings or other art work, wall lighting fixtures, special furniture that will be against any of these 3 walls/sides (built-in or moveable). 3- Materials List (after approval of final design). A PDF document that provides a clear description, image, and web link for each of the following material items as included in the final approved design: - Flooring Tiles - Wall cladding elements - Chandeliers - Wall lighting fixtures - Wall paint - Sofas - Dining Table and Chairs - Curtain fabric STEPS: In order to not waste time and effort in producing 3D renderings prematurely, the creation of the first version of the 3D renderings shall be delayed until after going through a series of preceding steps and iterations as follows: STEP 1: The freelancer shall first suggest the elements by providing images and web links to each suggested element and explain their suggested locations in the zone. After accepting these suggestions or any revisions (based on my comments), the selected elements are considered preliminary and maybe changed later after visualizing them in the next steps. STEP 2: WITHOUT producing 3D renderings, create 3D modeling of the suggested design and provide 3D modeling screenshots (not renderings) for all design aspects and sections. Discussions in this step may involve changing some of the elements that were previously accepted in STEP 1. This step may also involve revisions and iterations of the 3D modeling screenshots based on my comments. STEP 3: Create the first set (version) of the six (6) 3D renderings after getting my instructions on the camera angles and zooms. Discussions in this step may result in changing some of the elements that were previously accepted in STEPs 1 and 2 (after visualizing them better in this step). After revisions based on my comments, we can go to the next step. STEP 4: Produce the final set of the 3D renderings. STEP 5: Produce the other deliverables (2D Elevation Drawings + Materials List)
Design peopleperhour Overseas
744 days ago
220.0 USD
Greetings, IMPORTANT INTRODUCTION: I am an experienced client of architectural and interior design work (mostly through other platforms). I follow a specific work sequence in order to minimize waste of time and effort on both the freelancer's side and my side. I also provide very detailed instructions and comments to minimize misunderstandings and waste of time and effort. KINDLY READ THE FOLLOWING CAREFULLY SCOPE OVERVIEW: This job is to design the exterior for a small villa (including the exterior of the villa building, the front fence, the front terrace, swimming pool, garden, garage area, rooftop garden). The floor plans for the villa have already been designed, and I will provide an AutoCad file to the selected freelancer. The scope may require the selected freelancer to suggest and make very limited adjustments to the floor plans (if necessary). DESIGN STYLE: Ultra Modern REQUIRED DELIVERY TIME: Within 30 calendar days after job award REQUIRED DELIVERABLES (for final approved design): 3D RENDERINGS: 1- Four (4) daytime 3D renderings for the villa itself (we will discuss the camera angles) 2- Three (3) daytime 3D renderings for the garden/swimming pool/garage area 3- One (1) daytime 3D rendering for the front terrace (which will also include a water curtain fountain) 4- Two (2) daytime 3D renderings for the rooftop garden 5- Two (2) night time 3D rendering for the villa and front terrace (one including the front fence and one without the front fence) 6- One (1) nighttime 3D rendering for the garden/swimming pool/garage area MODIFIED FLOOR PLANS (if applicable): IF the floor plans were adjusted, provide the modified villa floor plans in both PDF and DWG ANIMATION VIDEO: An animation video is required for the entire villa from all sides at daytime and ending with nighttime, including views that begin from the street. ALL 3D RENDERINGS AND VIDEO MUST BE PHOTO REALISTIC HIGH RESOLUTION. I will decide the different angles and zooms at the right time prior to creating these 3D renderings. STEPS: In order to not waste time and effort in producing 3D renderings prematurely, the creation of the first version of the 3D renderings shall be delayed until after going through a series of preceding steps and iterations as follows: STEP 1: The freelancer shall first suggest the elements by providing images and web links to each suggested element (including examples of house designs in youtube and elsewhere that incorporated these elements), and explain their suggested locations on the building exterior and front fence exterior. After accepting these suggestions or any revisions (based on my comments), the selected elements are considered preliminary and maybe changed later after visualizing them in the next steps. STEP 2: WITHOUT producing 3D renderings, create 3D modeling of the suggested design and provide 3D modeling screenshots (not renderings) for all design aspects and sections. Discussions in this step may involve changing some of the elements that were previously accepted in STEP 1. This step may also involve revisions and iterations of the 3D modeling screenshots based on my comments. STEP 3: Create the first set (version) of some of the required 3D renderings after getting my instructions on the camera angles and zooms. Discussions in this step may result in changing some of the elements that were previously accepted in STEPs 1 and 2 (after visualizing them better in this step). After revisions based on my comments, we can go to the next step. STEP 4: Produce a second revision of some of the 3D renderings. If the design is settled and accepted, we proceed to the next step, otherwise, produce the needed revisions. STEP 5: Produce the final set of the complete 3D renderings. STEP 6: Produce the animation video.
Design peopleperhour Overseas
744 days ago
200.0 GBP
Any teachers / SENDcos out there looking for a small project for some extra cash? I'm a freelancer (compliance and business support) and I am currently working on a project my client, a woman who is trying to set up a small independent school for children with autism. It's a project that's very personal to her, as her local authority are not able to find her a school place for her autistic son. She's therefore decided to open a school and the LA will buy the places back. To be able to submit the registration application, we need help from a SENDco or teacher with SEND experience, to get the curriculum docs in place. What’s going to be needed to submit with the Registration online are the following: • curriculum policy (in place, attached here) • curriculum plans • schemes of work • pupil assessment procedures Someone was working this, hence there is already something in place (see attached policy) but my client is happy for it to be amended or reworked. Given long lead times for Ofsted to visit, she needs to get the application sent off. All documents must meet the ISI/Ofsted and statutory curriculum requirements
Writing & Translation peopleperhour Overseas
744 days ago
¥ 100000
LDAR检测管控平台总体要求 有建档管理、第三方导入数据导入、检测管理、维修与修复管理、资料管理、基础信息管理、第三方检测管理、报表中心等模块组件。 基础信息管理 （1）三种用户类型：园区级用户、企业级用户和第三方检测机构用户。 （2）园区账户：创建企业级用户，企业用户管理； （3）企业用户：创建检测人员、检测仪器，人员与企业绑定，检测仪器与企业和检测人员绑定；人员管理、仪器管理。 （5）第三方检测机构：创建第三方检测机构用户、用户管理；创建检测人员、检测仪器，人员与企业绑定，检测仪器与企业和检测人员绑定；人员管理、仪器管理。 （6）与创建、绑定、管理相关的申请、审核功能。 （7）泄露认定浓度管理； （8）排放量计算规则管理； 档案建立 （1）具备其它LDAR信息化系统的导入功能，主要包括密封点信息导入、图片导入、历史数据导入等。 （2）建档：平台具备建立部门、建立装置、建立群组、建立密封点的功能； （3）现场终端具备检测人员登录账号，确认身份功能，具备建立楼层、群组、密封点，拍照标点并上传至平台的功能； （4）平台和终端具备密封点管理功能，包括位置和基本信息的增删改功能； （5）平台具备针对装置、设备与管线组建、密封点群组、密封点位等单元的二维码生成功能。手机扫描二维码可以得到该单元的信息指纹。 任务下发 平台具备检测计划的创建、更新和删除功能；按照检测计划，生成检测任务，定向推送至检测人员和检测数据的管理功能。终端具备检测任务的下载和查看功能。 现场检测 （1）检测人员手持终端具备检测人员身份识别功能； （2）具备泄漏点位自动录入功能（目视跑冒滴漏，直接认定为泄漏），具备自动上传功能。 泄漏点复测 （1）检测数据经过审核后，自动生成泄漏修复任务，识别修复类型（首次尝试修复、实质性修复和延迟修复） （2）修复任务下发，终端身份识别、下载修复任务，执行修复，提交修复结果。 （3）修复结束后，自动生成复测工单，复测任务下发，终端身份识别、下载复测任务，执行复测，数据上传，审核确认。如遇泄漏再次生成修复任务，执行修复和检测过程，直至不泄漏为止。 报表查看 （1）密封点明细台账；园区级别、企业级别、部门级别、装置级别、区域级别 （2）修复前后排放统计； （3）密封点数量及排放量统计 （4）以上报表按照园区级别、企业级别、部门级别、装置级别、区域级别的筛选功能
Technology & Programming 码市 China
744 days ago
200.0 GBP
Hi, We are looking for an experienced WordPress e-commerce product expert to help us migrate our products with variations from our current website to a new one manually. We have approximately 1200-1400 products that need to be copied over to the new website. Current website is in PERL. Responsibilities: Copying all products with their variations from the old website to the new one manually and also same products variations in single product page. (Total products are 2400-2800). Adding each product twice in the new website to ensure variations and single product pages are displayed correctly. Ensuring accuracy and quality assurance (QA) by checking that all product information is correct and complete Please apply if you can do in 8 days. Thanks!
Technology & Programming peopleperhour Overseas
744 days ago

HuntsBot,a one-stop outsourcing task, remote job, product ideas sharing and subscription platform, which supports DingTalk, Lark, WeCom, Email and Telegram robot subscription. The platform will push outsourcing task requirements, remote work opportunities, product ideas to every subscribed user with timely, stable and reliable.

简体中文 English

Platform

Support

Links

Contact US

Any questions or suggestions during use, you can contact us in the following ways:

Email: huntsbot@xinbeitime.com

Copyright© 2022-2023 www.huntsbot.com 浙ICP备2022000860号-4 All Rights Reserved.