Corporate plan turned into visual

50.0 USD

50.0 USD peopleperhour 设计 海外
18小时前

详细信息

Please help me to create a corporate plan as a visual.
Three images attached for guidance. 1. File I have mocked up in power point for content and concept.2. Image with handwriting on to illustrate a couple of requirements I could not create in PP.3. Images with colours I would like to use. Green/Purple/Orange/Blue/Magenta - I do not have the specific colour numbers. Closest match is fine.
Please check the files before offer.

免责声明

该外包需求信息来源于站外平台，本站仅提供公开信息部分字段展示与订阅服务，更多请查看免责声明。

立即前往
关注公众号,不定期副业成功案例分享
关注公众号

不定期副业成功案例分享

想领先一步获取最新的外包任务吗？

立即订阅

类似推荐

Hi, I’m looking for an experienced fashion designer or technical designer to create a detailed tech pack for a fully knitted Christmas jumper. This isn’t a printed sweatshirt — it’s a proper jacquard knitted garment, but I’m aiming for a soft-feel, sweatshirt-like finish rather than traditional chunky knitwear. Think fine gauge knit with comfortable, wearable fabric. What I need in the tech pack: • Flat sketches (front, back, and side) • Full knitwear construction details • Yarn/fabric spec recommendations (soft-feel but suitable for jacquard) • Sizing / measurement chart (adult sizes, unisex) • Colourway guidance (including Pantone matching) • Logo/label placement • Packaging notes (basic, e.g. polybag or tissue wrap) • File formats: ideally PDF + editable version (AI/PSD) ⸻ Ideal freelancer: • Experience with knitwear tech packs (not just fashion prints or gymwear) • Knowledge of jacquard and knitwear construction • Comfortable working with manufacturers overseas • Can turn this around in 1–2 weeks I have reference images, design inspiration, and a clear idea of what I want — just need help turning it into something I can hand to my manufacturer. ⸻
99.0 GBP 设计 peopleperhour 海外
3天前
Mounts design Design brief Overview This job is a design job for physical computer mounts which will be made in metal and will be modular so they can be scaled up. The design will be initial design ideas shown by drawings, which will then be made into engineering drawings and put into CAD with STEP output so they can be given to the metal fabricators to make. Summary Our company designs a small desktop computer, the Louvar ZX12, which is installed on ships, where space is tight. Datasheet as attached. We currently have made simple mounting brackets as follows: - Angle mounts to bolt the computer to a desk. - Stack mounts which allow computers to be stacked up to 4 units high. - Vertical mount case, for a vertical mounting position. Pictures as attached. The design brief We now have a requirement to design mountings as follows: 1. Side mount, to attach between 1 to 4 x Louvars to the side of a desk (left or right). This should be a modular design, so each mount can attach to another mount, with fixings to mount the whole thing to the side of a desk. Each pc has a power supply which is at the back of each pc, and this needs to be housed as well. We also need to house a KVM switch, which will have a psu, and this is a different size to the pc’s. There will be 1 x KVM switch to 4 x pc’s. We would prefer a sleeve design, so that the pc slips inside the sleeve, and then it can be secured with bolts which align with the fixings on the side of the pc. Consideration should be given to how each unit can be removed easily, without disturbing the cable sand power supply at the back. The case should be strong enough to support up to 4 x pcs and 4 x psu’s. But weight is a consideration, and we should try and reduce weight in the mount wherever possible. Steel is the preferred material, which will then be powder coated. 2. Under desk When mounted under the desk, the pcs will go horizontally, in a modular arrangement, with 1 x KVM switch. 3. Desk mount The design is to have one pc on top of the other, and side by side. The KVM switch and the psu to be included. Again, a modular arrangement. 4. Rack mount The requirement is for up to 6 x pc’s and 6 x psu’s to be mounted on a shelf in a standard 19-inch computer rack. The pc’s will be mounted vertically. An extra strong shelf will need to be designed to support the weight. This job will suit a design engineer who has experience in designing in metal, and who has an understanding of metal fabrication. all information here: https://www.dropbox.com/scl/fo/ri8gwechthaxbeut5fky3/ALy1O5yc4XSf6IsWsig0tOU?rlkey=foa6quov43r33mw2rnydsmgrz&dl=0
25.0 USD 设计 peopleperhour 海外
20小时前

HuntsBot(狩猎机器人)，一站式外包任务、远程工作、产品创意分享与订阅平台，支持钉钉、飞书、企业微信、邮箱、Telegram机器人订阅。平台会以及时、稳定、可靠的技术把外包任务需求、远程工作机会、产品创意等推送给每一位订阅的用户。

简体中文 English

平台

支持

友情链接

联系我们

在使用过程中有任何问题或建议，可以通过以下方式联系我们：

微信公众号: 火星来客

Email: huntsbot@xinbeitime.com

Copyright© 2022-2023 www.huntsbot.com 浙ICP备2022000860号-4 All Rights Reserved.