MANGO TAPIOCA

10.0 USD

10.0 USD peopleperhour 设计 海外
370天前

详细信息

We are seeking a skilled graphic designer to create a fresh, memorable logo for our new tapioca smoothie shop named 'Mango Tapioca'. The logo will be used across all of our marketing materials both online and offline. It should capture the delicious flavors and vibrant colors of mango blended with creamy tapioca balls. The designer should present several concept designs reflecting the tropical, vibrant aesthetic we wish to portray. The top few candidates will be asked for revisions and we aim to select a final design within two weeks. Bidders with experience creating logos for food/beverage startups are preferred. Payment will be made upon delivery of the final approved logo file.

免责声明

该外包需求信息来源于站外平台，本站仅提供公开信息部分字段展示与订阅服务，更多请查看免责声明。

立即前往
关注公众号,不定期副业成功案例分享
关注公众号

不定期副业成功案例分享

想领先一步获取最新的外包任务吗？

立即订阅

类似推荐

I have designed a cover for a plug socket cover i want redesigned and improved. i have the STL file, GLTF file and OBJ file (i designed it on tinkercad) but i want it imroved. its important the dimensions of the back remain the same, and the holes are in the same position as it screws to the front of a plug socket, and the sides are angled in a simialar way so it pulls out once the wall has been plastered ok. I would like some small additions made to it which would be amazing, however i would need to add this as a part which is 3d printed seperately. which would be a wago holder which goes on the back of the plate, to hold the wago connectors on the back of it. I also want the recess on the top adjusted, so they stack on top of each other correctly (currently its a couple of mm out). the dimensions for the wago connectors are Height: 8.3mm. Width: 18.7mm. Depth: 18.6mm (and ive attaced a image of the connector) along with a example of a wago holder to have something similar which can be glued on the back of the faceplace being designed I also need another faceplate to be designed the same, for a double socket, but with the measurements at the bottom/back of 126mm wide x 68mm tall with the two screw holes located 120mm apart (centers) with a 4mm hole for the screw. i can provide back drawings if need be (but it will be basic) So i need 1 - My design improved (no writing) made stackable. 2 - My design amended to be the same design but in a double socket dimensions 3 - a wago holder, big enough to hold 3 x 3 way wagos, and to be glued to the back of the faceplate. these need to be provided in the original file for editing, and also a STL. they will be printed with a 0.4mm nozzle, in PLA or PETG. please quote to complete the job, and also timescales.
40.0 GBP 设计 peopleperhour 海外
1天前

HuntsBot(狩猎机器人)，一站式外包任务、远程工作、产品创意分享与订阅平台，支持钉钉、飞书、企业微信、邮箱、Telegram机器人订阅。平台会以及时、稳定、可靠的技术把外包任务需求、远程工作机会、产品创意等推送给每一位订阅的用户。

简体中文 English

平台

支持

友情链接

联系我们

在使用过程中有任何问题或建议，可以通过以下方式联系我们：

微信公众号: 火星来客

Email: huntsbot@xinbeitime.com

Copyright© 2022-2023 www.huntsbot.com 浙ICP备2022000860号-4 All Rights Reserved.