2d 3d design of circle

15.0 GBP

15.0 GBP peopleperhour Design Overseas
371 days ago

Description

to do 2d 3 d from the design in sketch

Go Now
关注公众号,不定期副业成功案例分享
Follow WeChat

Success story sharing

Want to stay one step ahead of the latest teleworks?

Subscribe Now

Similar Teleworks

Mounts design Design brief Overview This job is a design job for physical computer mounts which will be made in metal and will be modular so they can be scaled up. The design will be initial design ideas shown by drawings, which will then be made into engineering drawings and put into CAD with STEP output so they can be given to the metal fabricators to make. Summary Our company designs a small desktop computer, the Louvar ZX12, which is installed on ships, where space is tight. Datasheet as attached. We currently have made simple mounting brackets as follows: - Angle mounts to bolt the computer to a desk. - Stack mounts which allow computers to be stacked up to 4 units high. - Vertical mount case, for a vertical mounting position. Pictures as attached. The design brief We now have a requirement to design mountings as follows: 1. Side mount, to attach between 1 to 4 x Louvars to the side of a desk (left or right). This should be a modular design, so each mount can attach to another mount, with fixings to mount the whole thing to the side of a desk. Each pc has a power supply which is at the back of each pc, and this needs to be housed as well. We also need to house a KVM switch, which will have a psu, and this is a different size to the pc’s. There will be 1 x KVM switch to 4 x pc’s. We would prefer a sleeve design, so that the pc slips inside the sleeve, and then it can be secured with bolts which align with the fixings on the side of the pc. Consideration should be given to how each unit can be removed easily, without disturbing the cable sand power supply at the back. The case should be strong enough to support up to 4 x pcs and 4 x psu’s. But weight is a consideration, and we should try and reduce weight in the mount wherever possible. Steel is the preferred material, which will then be powder coated. 2. Under desk When mounted under the desk, the pcs will go horizontally, in a modular arrangement, with 1 x KVM switch. 3. Desk mount The design is to have one pc on top of the other, and side by side. The KVM switch and the psu to be included. Again, a modular arrangement. 4. Rack mount The requirement is for up to 6 x pc’s and 6 x psu’s to be mounted on a shelf in a standard 19-inch computer rack. The pc’s will be mounted vertically. An extra strong shelf will need to be designed to support the weight. This job will suit a design engineer who has experience in designing in metal, and who has an understanding of metal fabrication. Fixed price for this job is £500.00 GBP all information here: https://www.dropbox.com/scl/fo/ri8gwechthaxbeut5fky3/ALy1O5yc4XSf6IsWsig0tOU?rlkey=foa6quov43r33mw2rnydsmgrz&dl=0
500.0 GBP Design peopleperhour Overseas
3 days ago

HuntsBot,a one-stop outsourcing task, remote job, product ideas sharing and subscription platform, which supports DingTalk, Lark, WeCom, Email and Telegram robot subscription. The platform will push outsourcing task requirements, remote work opportunities, product ideas to every subscribed user with timely, stable and reliable.

简体中文 English

Platform

Support

Links

Contact US

Any questions or suggestions during use, you can contact us in the following ways:

Email: huntsbot@xinbeitime.com

Copyright© 2022-2023 www.huntsbot.com 浙ICP备2022000860号-4 All Rights Reserved.