Lighting contour plan

30.0 GBP

30.0 GBP peopleperhour 设计 海外
373天前

详细信息

I require a lighting contour plan for 4 number external downlights on a annexe building to satisfy the planning officer to enable discharge of a planning condition. I'm able to supply a CAD drawing of the building plan and elevations
the specific wording is:Lighting 6.8 Pipistrelles are one of the more light tolerant species but nevertheless, any new external lighting, if required, should be kept to a minimum in order to minimise disturbance to foraging and commuting bats and wildlife in general. Measures should include the use of lighting only where absolutely necessary utilising highly directional warm white LED lighting, an example being down spots at 2.5 m high using warm white (2700 K) 8W LED lamps, 550 lumens, 35 degree beam angle. These could be individually activated by PIR sensors on a 5 minute cut off to further reduce their impacts. These will assist in lighting only the areas where lighting is required and minimising light spill either directly or through reflected light.

免责声明

该外包需求信息来源于站外平台,本站仅提供公开信息部分字段展示与订阅服务,更多请查看免责声明

关注公众号,不定期副业成功案例分享
关注公众号

不定期副业成功案例分享

领先一步获取最新的外包任务吗?

立即订阅

类似推荐

I have designed a cover for a plug socket cover i want redesigned and improved. i have the STL file, GLTF file and OBJ file (i designed it on tinkercad) but i want it imroved. its important the dimensions of the back remain the same, and the holes are in the same position as it screws to the front of a plug socket, and the sides are angled in a simialar way so it pulls out once the wall has been plastered ok. I would like some small additions made to it which would be amazing, however i would need to add this as a part which is 3d printed seperately. which would be a wago holder which goes on the back of the plate, to hold the wago connectors on the back of it. I also want the recess on the top adjusted, so they stack on top of each other correctly (currently its a couple of mm out). the dimensions for the wago connectors are Height: 8.3mm. Width: 18.7mm. Depth: 18.6mm (and ive attaced a image of the connector) along with a example of a wago holder to have something similar which can be glued on the back of the faceplace being designed I also need another faceplate to be designed the same, for a double socket, but with the measurements at the bottom/back of 126mm wide x 68mm tall with the two screw holes located 120mm apart (centers) with a 4mm hole for the screw. i can provide back drawings if need be (but it will be basic) So i need 1 - My design improved (no writing) made stackable. 2 - My design amended to be the same design but in a double socket dimensions 3 - a wago holder, big enough to hold 3 x 3 way wagos, and to be glued to the back of the faceplate. these need to be provided in the original file for editing, and also a STL. they will be printed with a 0.4mm nozzle, in PLA or PETG. please quote to complete the job, and also timescales.
60.0 GBP 设计 peopleperhour 海外
3天前