I am trying to launch my app on device. It is launching successfully on the simulator.
List item
I use 7.1 SDK
Xcode 5
And the device is a 7.1 iPhone 4S
I have tried:
Clean
Clean Build Folder
Deleting app
Disconnecting/Reconnecting device
Booting device
restarting Xcode
What can I do to make it work?
Could it be something with Code Signing?
Currently i have it set to 'Dont Code Sign'
I had this problem when I used a Distribution certificate instead of Developer one when running the app from Xcode. You may check it out your target --> Build Settings --> Code signing.
As @AndyDynn pointed out in his comment: Make sure you do this on the "Target" build settings and not just the "Project" build settings.
I literally restarted my iPad, that was connected for testing the app, and that resolved the issue.
To run your app on a device, you will perform these tasks that follow:
Request a development certificate. Add your device to the portal. Code sign your app. Launch your app on the device.
For more detail check this
If your provisioning profile and code sign everything is alright then try once Quit and Restart your XCode. It will work for me.
I just had this issue. I had to open the app on device and tap Trust Computer. No need for me to reboot everything 20 times, yay.
Below are 2 awesome hacks that have not been mentioned yet:
HACK #1:
Lock your phone, press XCode start, wait till XCode says "unlock your device to launch", then unlock your phone, it will be launched successfully, works every time.
HACK #2:
If your goal is just to debug the app, here is another simple and straight-forward approach:
After the app is deployed, launch it manually. Goto XCode -> Debug -> Attach to Process ... to choose your app from the list, then debug properly.
This works well for me, and it saves lots of time. I hope this helps, thanks!
I got the same problem and after looking at the answers here I found mine. The issue at hand was: my dev distribution certificate was gone from iOS Dev Center, so I just assume it had timed out. I didn't get a nice warning though, just the above error - installing worked but debugging didn't. So I had Xcode regenerate a new one for me.
One more thing to try if you've tried the above: i found this link about quitting itunes to avoid the timeout. This works for me with xcode 5.1
In my case there was no value at Targets -> Build Settins ->Provisioning Profile. Though Code Signing looked ok)
I cleaned out my provisional profiles, rebooted the iPhone, rebooted the computer, and it worked for me.
Just to throw out an additional suggestion to anyone coming across this problem (it's been burning me frequently lately) -- try going to the Targets -> (Your Target) -> General -> Team and re-selecting the same Team, which forces Xcode to update profiles for you.
That has been the culprit for me a couple of times. Seems to happen specifically if you've recently re-downloaded a distribution certificate for new devices or w/e. Or if you've just dumped your Provisioning Profiles directory in general.
I had the same problem and I tried all the suggested steps but I managed to get it deployed and run only after I powered off my iphone.
Checked my Targets and code signing details, didn't help. I did three things:
Clean Build Folder Close Xcode and delete everything in Derived Data Rebooted my device
Everything worked fine after that. I had changed some App Transport Security setting in my info.plist right before this occurred. Not sure if it is related or if only one of my 3 steps were necessary, but it worked.
Make sure the Provisioning Profile setting in your environment is set to your development profile: Project > Build Settings > Code Signing
Consider setting it in your Target settings and the Pod project (in case using Cocoa Pods).
In case the development profile is not present create or download it: Certificates, Identifiers & Profiles > Provisioning Profiles
After following the above, it still didn't work (from xCode 6). But after rebooting the phone and deleting the app, it worked.
Check Product Name for dots "." "." are not allowed in Product name.
Selection in provisioning profiles may cause this problem. So while launching an app on to the device, make sure you are using the development profile & not the distribution profile. I have been facing the same issue. But got away with it using the same process.
Check for Project > Build Settings > Provisioning profile & select your development profile.
And also take care of Code Signing Identity in the same tab. Make sure you choose both the identities of Developer & NOT of Distribution.
Below two steps solved for me:
For xcode
version: 7.2
1.Select any of your simulator to run ( just start your run, no need to load the app completely).
2.Stop it.
3.Then select your device and run.
This solved in my case.
option + command + shift + k
and then run the project did the trick for me.
If your goal is to just launch the app and debug it, you can also edit the schema to "Wait for executable to be launched" and run the app manually. The setting is under Edit schema > Run > Info > Launch. Choose "Wait for executable to be launched" instead of "Automatically". It will wait for you to run the app (by manually tapping it) instead of timing out.
As all of the above answers didn't helped for me I'll publish my solution:
Deleting all the occurrences of xcuserdata
folders in .xcodeproj
and .xcworkspace
and restarting Xcode fixed the problem. To delete it right click your_app_name.xcodeproj
and/or your_app_name.xcworkspace
in your app folder and select "Show Package Contents"
. I hope that help someone to save some time.
Just restart my Device and works everything fine
I tried:
Restart the device (iPhone) Clean build the XCode project
Then it works.
Check whether the device memory is full.
Success story sharing