iOS app with framework crashed on device, dyld: Library not loaded, Xcode 6 Beta

In the target's General tab, there is an Embedded Binaries field. When you add the framework there the crash is resolved.

Reference is here on Apple Developer Forums.

---

For iOS greater than or equal to 8

Under the target's General tab, in the Embedded Binaries section add the framework. This will copy the framework into the compiled so that it can be linked to at runtime.

https://i.stack.imgur.com/zRwSS.png

Why is this happening? : because the framework you are linking to is compiled as a dynamically linked framework and thus is linked to at runtime.

** Note:** Embedding custom frameworks is only supported in iOS > 8 and thus an alternative solution that works on older versions of iOS follows.

For iOS less than 8

If you influence this framework (have access to the source code/build process) you may change this framework to be statically linked rather than dynamically linked. This will cause the code to be included in your compiled app rather than linked to at runtime and thus the framework will not have to be embedded.

** How:** Under the framework's Build Setting tab, in the Linking section, change the Mach-O Type to Static Library. You should now not need to include the framework under embedded binaries.

https://i.stack.imgur.com/6yKzU.png

Including Assets: To include things such as images, audio, or xib/nib files I recommend creating a bundle (essentially a directory, more info here bit.ly/ios_bundle) and then load the assets from the bundle using NSBundle.

---

Just dragging the framework into your project isn't going to be good enough. That is like being in the same ballpark but not being able to find your kids. Follow these steps:

1) Create your framework

Develop your framework.

Once your development is complete, COMMAND+B build your framework and ensure you receive "Build Succeeded".

https://i.stack.imgur.com/jdTPo.png

2) Access your framework

Once your framework project successfully builds it will then be ready for you to access in your Products folder in your project.

https://i.stack.imgur.com/vmBPE.png

Right click on your .framework and select "Show in Finder".

https://i.stack.imgur.com/TaAwN.png

3) Place framework in your project

Drag and drop the .framework from your Finder window to your app project's "Framework" folder.

https://i.stack.imgur.com/yF10y.png

4) Configure app project for framework

Select the top level in your project

https://i.stack.imgur.com/8g9nA.png

Choose your target

https://i.stack.imgur.com/AlCw7.png

Go to "Build Phases", then "Link Binary with Libraries", and ensure that your framework is included with optional selected.

https://i.stack.imgur.com/qTQ9M.png

Still in "Build Phases", go to the upper left and select the + button. In the drop down choose "New Copy Files Phase".

https://i.stack.imgur.com/rUzCO.png

Scroll down to the new "Copy Files" section and ensure that you set Destination to "Frameworks". Leave the subpath empty. Then click the + button at the bottom left.

https://i.stack.imgur.com/sz6Cc.png

You will be presented with your project hierarchy. Scroll down to the "Frameworks" folder that you added the framework to in step 3, or search for it in the search bar at the top. Select your framework and click "Add".

https://i.stack.imgur.com/nbtJ7.png

Ensure that your framework is included with "Code Sign On Copy" selected.

https://i.stack.imgur.com/nrFNd.png

5) Clean, then run your project

COMMAND+SHIFT+K

COMMAND+R

---

Firstly Try to build after Command+Option+Shift+K .If still fails then do below steps.

If anybody is facing this error in Xcode 8 then change your framework status to Optional instead of Required under the General Tab of your target.

https://i.stack.imgur.com/VGhy1.png

---

I created a framework using Swift3/Xcode 8.1 and was consuming it in an Objective-C/Xcode 8.1 project. To fix this issue I had to enable Always Embed Swift Standard Libraries option under Build Options.

Have a look at this screenshot:

https://i.stack.imgur.com/sIlyu.png

---

I got same kind of issue in iOS 9.x version

ISSUE IS: App crashes as soon as I open the app with below error.


dyld: Library not loaded: /System/Library/Frameworks/UserNotifications.framework/UserNotifications
  Referenced from: /var/containers/Bundle/Application/######/TestApp.app/TestApp
  Reason: image not found

I have resolved this issue by changing Required to Optional in Linked Frameworks and Libraries for UserNotifications.framework framework.

---

I had to (on top of what mentioned here) add the following line to Runpath Search Paths under Build Settings tab:
@executable_path/Frameworks

https://i.stack.imgur.com/yihsd.png

---

You need to add the framework to a new Copy Files Build Phase to ensure that the framework is copied into the application bundle at runtime..

See How to add a 'Copy Files build phase' to my Target for more information.

Official Apple Docs: https://developer.apple.com/library/mac/recipes/xcode_help-project_editor/Articles/CreatingaCopyFilesBuildPhase.html

---

If you're using Xcode 11 or newer:

Navigate to the settings of your target and select General.

https://i.stack.imgur.com/yOEX8.png

Scroll down to Frameworks, Libraries and Embedded Content. Make sure the Embed & Sign or Embed Without Signing value is selected for the Embed option if necessary.

https://i.stack.imgur.com/kx5Xu.png

---

It is a runtime error that is caused by Dynamic Linker

dyld: Library not loaded: @rpath/<some_path>
Referenced from: <some_path>
Reason: image not found

The error Library not loaded with @rpath indicates that Dynamic Linker cannot find the binary.

Check if the dynamic framework was added to the front target General -> Frameworks, Libraries, and Embedded Content (Embedded Binaries). It is very simple to drag-and-drop a framework to project with Copy items if needed[About] and miss to add the framework as implicit dependency in Frameworks, Libraries, and Embedded Content(or check in Add to targets). In this case during compile time Xcode build it as success but when you run it you get runtime error Check the @rpath setup between consumer(application) and producer(dynamic framework):

Dynamic framework: Build Settings -> Dynamic Library Install Name

Build Settings -> Dynamic Library Install Name

Application: Build Settings -> Runpath Search Paths Build Phases -> Embed Frameworks -> Destination, Subpath

Build Settings -> Runpath Search Paths

Build Phases -> Embed Frameworks -> Destination, Subpath

Framework's Mach-O file[About] - Dynamic Library and Application's Frameworks, Libraries, and Embedded Content[About] - Do Not Embed.

Dynamic linker

Dynamic Library Install Name(LD_DYLIB_INSTALL_NAME) which is used by loadable bundle(Dynamic framework as a derivative) where dyld come into play
Dynamic Library Install Name - path to binary file(not .framework). Yes, they have the same name, but MyFramework.framework is a packaged bundle with MyFramework binary file and resources inside.
This path to directory can be absolute or relative(e.g. @executable_path, @loader_path, @rpath). Relative path is more preferable because it is changed together with an anchor that is useful when you distribute your bundle as a single directory

absolute path - Framework1 example

//Framework1 Dynamic Library Install Name
/some_path/Framework1.framework/subfolder1

Relative path allows you to define a path in a dynamic way.

@executable_path

@executable_path - relative to executable binary which loads framework
use case: Dynamic framework inside Application(application binary path is @executable_path) or more complex example with App Extension^[About] which is a part of Containing App with Dynamic Framework inside. There 2 @executable_path for Application target (application binary path is @executable_path) and for App Extension target(App Extension binary path is @executable_path)) - Framework2 example

//Application bundle(`.app` package) absolute path
/some_path/Application.аpp

//Application binary absolute path 
/some_path/Application.аpp/subfolder1

//Framework2 binary absolute path
/some_path/Application.аpp/Frameworks/Framework2.framework/subfolder1

//Framework2 @executable_path == Application binary absolute path <-
/some_path/Application.аpp/subfolder1

//Framework2 Dynamic Library Install Name 
@executable_path/../Frameworks/Framework2.framework/subfolder1

//Framework2 binary resolved absolute path by dyld
/some_path/Application.аpp/subfolder1/../Frameworks/Framework2.framework/subfolder1
/some_path/Application.аpp/Frameworks/Framework2.framework/subfolder1

@loader_path

@loader_path - relative to bundle which causes framework to be loaded. If it is an application than it will be the same as @executable_path
use case: framework with embedded framework - Framework3_1 with Framework3_2 inside

//Framework3_1 binary absolute path
/some_path/Application.аpp/Frameworks/Framework3_1.framework/subfolder1

//Framework3_2 binary absolute path
/some_path/Application.аpp/Frameworks/Framework3_1.framework/Frameworks/Framework3_2.framework/subfolder1

//Framework3_1 @executable_path == Application binary absolute path <-
/some_path/Application.аpp/subfolder1

//Framework3_1 @loader_path == Framework3_1 @executable_path <-
/some_path/Application.аpp/subfolder1

//Framework3_2 @executable_path == Application binary absolute path <-
/some_path/Application.аpp/subfolder1

//Framework3_2 @loader_path == Framework3_1 binary absolute path <-
/some_path/Application.аpp/Frameworks/Framework3_1.framework/subfolder1

//Framework3_2 Dynamic Library Install Name 
@loader_path/../Frameworks/Framework3_2.framework/subfolder1

//Framework3_2 binary resolved absolute path by dyld
/some_path/Application.аpp/Frameworks/Framework3_1.framework/subfolder1/../Frameworks/Framework3_2.framework/subfolder1
/some_path/Application.аpp/Frameworks/Framework3_1.framework/Frameworks/Framework3_2.framework/subfolder1

@rpath - Runpath Search Path

Framework2 example

Previously we had to setup a Framework to work with dyld. It is not convenient because the same Framework can not be used with a different configurations. Since this setup is made on Framework target side it is not possible to configure the same framework for different consumers(applications)

@rpath is a compound concept that relies on outer(Application) and nested(Dynamic framework) parts:

Application: Runpath Search Paths(LD_RUNPATH_SEARCH_PATHS) - @rpath - defines a list of templates which will be substituted with @rpath. Consumer uses @rpath word to point on this list @executable_path/../Frameworks Review Build Phases -> Embed Frameworks -> Destination, Subpath to be sure where exactly the embed framework is located

Runpath Search Paths(LD_RUNPATH_SEARCH_PATHS) - @rpath - defines a list of templates which will be substituted with @rpath. Consumer uses @rpath word to point on this list @executable_path/../Frameworks

Review Build Phases -> Embed Frameworks -> Destination, Subpath to be sure where exactly the embed framework is located

Dynamic Framework: Dynamic Library Install Name(LD_DYLIB_INSTALL_NAME) - points that @rpath is used together with local bundle path to a binary @rpath/Framework2.framework/subfolder1

Dynamic Library Install Name(LD_DYLIB_INSTALL_NAME) - points that @rpath is used together with local bundle path to a binary @rpath/Framework2.framework/subfolder1

//Application Runpath Search Paths
@executable_path/../Frameworks

//Framework2 Dynamic Library Install Name
@rpath/Framework2.framework/subfolder1

//Framework2 binary resolved absolute path by dyld
//Framework2 @rpath is replaced by each element of Application Runpath Search Paths
@executable_path/../Frameworks/Framework2.framework/subfolder1
/some_path/Application.аpp/Frameworks/Framework2.framework/subfolder1

*../ - go to the parent of the current directory

otool - object file displaying tool

//-L print shared libraries used
//Application otool -L
@rpath/Framework2.framework/subfolder1/Framework2

//Framework2 otool -L
@rpath/Framework2.framework/subfolder1/Framework2

//-l print the load commands
//Application otool -l
LC_LOAD_DYLIB
@rpath/Framework2.framework/subfolder1/Framework2

LC_RPATH
@executable_path/../Frameworks

//Framework2 otool -l
LC_ID_DYLIB
@rpath/Framework2.framework/subfolder1/Framework2

install_name_tool change dynamic shared library install names using -rpath

CocoaPods uses use_frameworks!^[About] to regulate a Dynamic Linker

[Vocabulary]

[Java ClassLoader]

---

https://i.stack.imgur.com/feogf.png

Then Clean and Build.

---

Surprisingly, not all of the necessary pieces are documented here, at least for Xcode 8.

My case was a custom-built framework as part of the same workspace. It turns out it was being built incorrectly. Based on jeremyhu's last response to this thread:

https://forums.developer.apple.com/thread/4687

I had to set Dynamic Library Install Name Base (DYLIB_INSTALL_NAME_BASE) under Build Settings of the Framework Project and then rebuild it. It was incorrectly set to $(LOCAL_LIBRARY_DIR) and I had to change it to @rpath.

So in the link processing stage in the App Project, it was instructing the host App to dynamically load the framework at runtime from /Library/Frameworks/fw.Framework/fw (as in, the root of the runtime filesystem) rather than path-to-App/Frameworks/fw.Framework/fw

Regarding all the other settings: it does have to be in 3 places in Build Phases, but these are all set at once when you just add it to the Embedded Binaries setting of the General tab of the hosting App.

I did not have to set up an extra Copy Files phase, which seems intuitively redundant with respect to the embedding stage anyway. By checking the tail end of the build transcript we can assure that that's not necessary.

PBXCp /Users/xyz/Library/Developer/Xcode/DerivedData/MyApp-cbcnqafhywqkjufwsvbzckecmjjs/Build/Products/Debug-iphoneos/MyFramework.framework

[Many verbose lines removed, but it's clear from the simplified transcript in the Xcode UI.]

I still have no idea why Xcode set the DYLIB_INSTALL_NAME_BASE value incorrectly on me.

---

Recently ran into this issue with importing CoreNFC on older iphones (e.g. iPhone 6) and Xcode (11.3.1). I was able to get it to work by

In your Projects, select the target. Goto General tab on top. Under the 'Frameworks, Libraries and Embedded Content' section, add the framework (for me it was CoreNFC). Repeat for other targets. Click on Build Phases on top and expand 'Link Binary with Libraries'. Make the troublesome framework optional (from required).

This allowed me to compile for older/newer iPhones without making any code changes. I hope this helps other.

---

My environment: Cocos2d 2.0, Box2d, Objective C

In addition to doing the other answers above I finally went to the General tab and made WatchKit Optional.

https://i.stack.imgur.com/mUI4A.png

---

In my case the solution was to remove the compiled framework from the Embedded Binaries, which was a standalone project in the workspace, clean and rebuild it, and finally re-add to Embedded Binaries.

---

If you are using a third-party framework, and using Cocoapods as your dependency manager, try doing a pod install to refresh your pods.

This crash was occurring on a third-party library I was using, so glad the above solution worked for me, hope it works for you!

---

https://i.stack.imgur.com/cL5OH.png

Resolved for me by unselecting "Copy only when installed" on Build Phases->Embed Frameworks

---

I had the same issue. I tried building my project with an iPhone that I never used before and I didn't add a new framework. For me, cleaning up worked fine (Shift+Command+K). Maybe it's because I use beta 5 of Xcode 7 and an iPhone 6 with iOS 9 Beta, but it worked.

---

For any project or Framework project in Xcode that use pods, one easy way to avoid dynamic library (dylb) not to load is to set you pod file to ink in static mode. To do so, just make sure to don't write the following line in your pod file.

use_frameworks!

Once the line deleted from your file which you saved, simply run form the console:

$ pod update

---

In my case, my project is written by objective-c and in the library there are Swift files. So I changed "Always Embed Swift Standard Libraries" in my project’s Build Settings tab to Yes and it became totally okay.

---

The simple solution is follow this screenshot then crash will go away:

https://i.stack.imgur.com/VAPc4.png

Noted: This is Xcode 11.5

---

If have development pod Delete your app from simulator install from pod -> clean - > run again...

---

The same thing was when I've created a new Configuration and Build Scheme.

So the solution for me was to run

pod install

for this newly created Configuration.

---

For me, I had to switch the XcodeKit.framework from "Do Not Embed" -> "Embed & Sign"

https://i.stack.imgur.com/E7Mid.png

---

https://i.stack.imgur.com/sa8o9.png

---

Try with changing flag ALWAYS_EMBED_SWIFT_STANDARD_LIBRARIES (in earlier xcode versions: Embedded Content Contains Swift Code) in the Build Settings from NO to YES.

---

Xcode 11

Navigate to settings of your target and select General. Look for "Frameworks, Libraries, and Embedded Content" Keep "Do Not Embed" and make sure that all your targets (if you have more than one) have only set it's own framework and not others targets.

---

In Xcode 11

I was facing the same issue

Changing "Do Not Embed" in General Tab > "Frameworks, Libraries, and Embedded Content" was still resulting the same error.

What did solved for me was adding the Framework in Build Phases Tab > Embed Frameworks section

--Updated---

I observed that in projects built in previous versions of Xcode Embed Frameworks Section is not available when running in Xcode 11, Find the below steps to achieve the solution:

1: First need to add the New Copy Files Phase under Build Phases tab.

https://i.stack.imgur.com/2bRVj.png

https://i.stack.imgur.com/y0cls.png

3: Change the destination to Frameworks.

https://i.stack.imgur.com/IXVmM.png

4: Add the framework for which the error occurred.

https://i.stack.imgur.com/7SiVe.png

---

For SumUp Users, if you are loading the latest SumUpSDK.xcFramework, then you need to make sure that it's set to "Embed & Sign" from the application's General tab of the Target.

i.e. to reverse the above statement (making it easier to understand):

Go to the "Project Navigator" (i.e. the first icon to show all project items etc) Select your project from the top of the tree. On the menu in the middle of the page (slightly to the right), select your application under "Targets" From the top-tab, select "General" Scroll down to "Frameworks, Libraries and Embedded Content" Select your Lib from the list Select "Embed & Sign" from the drop down list next to it. Clean Re-Build and run.

I hope this helps.

H

---

Go to file in xcode -> Workspace settings Click the arrow next to which appears /Users/apple/Library/Developer/Xcode/DerivedData Select the Derived data and move it to Trash. Quite the xcode and reopen it. Clean the project and run again.

Above steps resolved my issuses.

---