Product Drawing HBD-03

50.0 GBP

50.0 GBP peopleperhour Design Overseas
8 hour ago

Description

I require a 2D product drawing of a height restriction barrier.The size is 6 meters wide x 2.4 meters clearance height from ground to horizontalFinish: Hot dip galvanisedWarning Sign: Max height 2.4MMaterial specification is on the attached hand sketchFooter company information as per sample attached
We need a very quick turn around on this drawing

Go Now
关注公众号,不定期副业成功案例分享
Follow WeChat

Success story sharing

Want to stay one step ahead of the latest teleworks?

Subscribe Now

Similar Teleworks

I have designed a cover for a plug socket cover i want redesigned and improved. i have the STL file, GLTF file and OBJ file (i designed it on tinkercad) but i want it imroved. its important the dimensions of the back remain the same, and the holes are in the same position as it screws to the front of a plug socket, and the sides are angled in a simialar way so it pulls out once the wall has been plastered ok. I would like some small additions made to it which would be amazing, however i would need to add this as a part which is 3d printed seperately. which would be a wago holder which goes on the back of the plate, to hold the wago connectors on the back of it. I also want the recess on the top adjusted, so they stack on top of each other correctly (currently its a couple of mm out). the dimensions for the wago connectors are Height: 8.3mm. Width: 18.7mm. Depth: 18.6mm (and ive attaced a image of the connector) along with a example of a wago holder to have something similar which can be glued on the back of the faceplace being designed I also need another faceplate to be designed the same, for a double socket, but with the measurements at the bottom/back of 126mm wide x 68mm tall with the two screw holes located 120mm apart (centers) with a 4mm hole for the screw. i can provide back drawings if need be (but it will be basic) So i need 1 - My design improved (no writing) made stackable. 2 - My design amended to be the same design but in a double socket dimensions 3 - a wago holder, big enough to hold 3 x 3 way wagos, and to be glued to the back of the faceplate. these need to be provided in the original file for editing, and also a STL. they will be printed with a 0.4mm nozzle, in PLA or PETG. please quote to complete the job, and also timescales.
60.0 GBP Design peopleperhour Overseas
1 hour ago

HuntsBot,a one-stop outsourcing task, remote job, product ideas sharing and subscription platform, which supports DingTalk, Lark, WeCom, Email and Telegram robot subscription. The platform will push outsourcing task requirements, remote work opportunities, product ideas to every subscribed user with timely, stable and reliable.

简体中文 English

Platform

Support

Links

Contact US

Any questions or suggestions during use, you can contact us in the following ways:

Email: huntsbot@xinbeitime.com

Copyright© 2022-2023 www.huntsbot.com 浙ICP备2022000860号-4 All Rights Reserved.