How to check if a map contains a key in Go?

One line answer:

if val, ok := dict["foo"]; ok {
    //do something here
}

Explanation:

if statements in Go can include both a condition and an initialization statement. The example above uses both:

initializes two variables - val will receive either the value of "foo" from the map or a "zero value" (in this case the empty string) and ok will receive a bool that will be set to true if "foo" was actually present in the map

evaluates ok, which will be true if "foo" was in the map

If "foo" is indeed present in the map, the body of the if statement will be executed and val will be local to that scope.

---

In addition to The Go Programming Language Specification, you should read Effective Go. In the section on maps, they say, amongst other things:

An attempt to fetch a map value with a key that is not present in the map will return the zero value for the type of the entries in the map. For instance, if the map contains integers, looking up a non-existent key will return 0. A set can be implemented as a map with value type bool. Set the map entry to true to put the value in the set, and then test it by simple indexing. attended := map[string]bool{ "Ann": true, "Joe": true, ... } if attended[person] { // will be false if person is not in the map fmt.Println(person, "was at the meeting") } Sometimes you need to distinguish a missing entry from a zero value. Is there an entry for "UTC" or is that 0 because it's not in the map at all? You can discriminate with a form of multiple assignment. var seconds int var ok bool seconds, ok = timeZone[tz] For obvious reasons this is called the “comma ok” idiom. In this example, if tz is present, seconds will be set appropriately and ok will be true; if not, seconds will be set to zero and ok will be false. Here's a function that puts it together with a nice error report: func offset(tz string) int { if seconds, ok := timeZone[tz]; ok { return seconds } log.Println("unknown time zone:", tz) return 0 } To test for presence in the map without worrying about the actual value, you can use the blank identifier (_) in place of the usual variable for the value. _, present := timeZone[tz]

---

Searched on the go-nuts email list and found a solution posted by Peter Froehlich on 11/15/2009.

package main

import "fmt"

func main() {
        dict := map[string]int {"foo" : 1, "bar" : 2}
        value, ok := dict["baz"]
        if ok {
                fmt.Println("value: ", value)
        } else {
                fmt.Println("key not found")
        }
}

Or, more compactly,

if value, ok := dict["baz"]; ok {
    fmt.Println("value: ", value)
} else {
    fmt.Println("key not found")
}

Note, using this form of the if statement, the value and ok variables are only visible inside the if conditions.

---

Short Answer

_, exists := timeZone[tz]    // Just checks for key existence
val, exists := timeZone[tz]  // Checks for key existence and retrieves the value

Example

Here's an example at the Go Playground.

Longer Answer

Per the Maps section of Effective Go:

An attempt to fetch a map value with a key that is not present in the map will return the zero value for the type of the entries in the map. For instance, if the map contains integers, looking up a non-existent key will return 0. Sometimes you need to distinguish a missing entry from a zero value. Is there an entry for "UTC" or is that the empty string because it's not in the map at all? You can discriminate with a form of multiple assignment. var seconds int var ok bool seconds, ok = timeZone[tz] For obvious reasons this is called the “comma ok” idiom. In this example, if tz is present, seconds will be set appropriately and ok will be true; if not, seconds will be set to zero and ok will be false. Here's a function that puts it together with a nice error report: func offset(tz string) int { if seconds, ok := timeZone[tz]; ok { return seconds } log.Println("unknown time zone:", tz) return 0 } To test for presence in the map without worrying about the actual value, you can use the blank identifier (_) in place of the usual variable for the value. _, present := timeZone[tz]

---

As noted by other answers, the general solution is to use an index expression in an assignment of the special form:

v, ok = a[x]
v, ok := a[x]
var v, ok = a[x]
var v, ok T = a[x]

This is nice and clean. It has some restrictions though: it must be an assignment of special form. Right-hand side expression must be the map index expression only, and the left-hand expression list must contain exactly 2 operands, first to which the value type is assignable, and a second to which a bool value is assignable. The first value of the result of this special form will be the value associated with the key, and the second value will tell if there is actually an entry in the map with the given key (if the key exists in the map). The left-hand side expression list may also contain the blank identifier if one of the results is not needed.

It's important to know that if the indexed map value is nil or does not contain the key, the index expression evaluates to the zero value of the value type of the map. So for example:

m := map[int]string{}
s := m[1] // s will be the empty string ""
var m2 map[int]float64 // m2 is nil!
f := m2[2] // f will be 0.0

fmt.Printf("%q %f", s, f) // Prints: "" 0.000000

Try it on the Go Playground.

So if we know that we don't use the zero value in our map, we can take advantage of this.

For example if the value type is string, and we know we never store entries in the map where the value is the empty string (zero value for the string type), we can also test if the key is in the map by comparing the non-special form of the (result of the) index expression to the zero value:

m := map[int]string{
    0: "zero",
    1: "one",
}

fmt.Printf("Key 0 exists: %t\nKey 1 exists: %t\nKey 2 exists: %t",
    m[0] != "", m[1] != "", m[2] != "")

Output (try it on the Go Playground):

Key 0 exists: true
Key 1 exists: true
Key 2 exists: false

In practice there are many cases where we don't store the zero-value value in the map, so this can be used quite often. For example interfaces and function types have a zero value nil, which we often don't store in maps. So testing if a key is in the map can be achieved by comparing it to nil.

Using this "technique" has another advantage too: you can check existence of multiple keys in a compact way (you can't do that with the special "comma ok" form). More about this: Check if key exists in multiple maps in one condition

Getting the zero value of the value type when indexing with a non-existing key also allows us to use maps with bool values conveniently as sets. For example:

set := map[string]bool{
    "one": true,
    "two": true,
}

fmt.Println("Contains 'one':", set["one"])

if set["two"] {
    fmt.Println("'two' is in the set")
}
if !set["three"] {
    fmt.Println("'three' is not in the set")
}

It outputs (try it on the Go Playground):

Contains 'one': true
'two' is in the set
'three' is not in the set

See related: How can I create an array that contains unique strings?

---

Have a look at this snippet of code

nameMap := make(map[string]int)
nameMap["river"] = 33
v ,exist := nameMap["river"]
if exist {
    fmt.Println("exist ",v)
}

---

    var d map[string]string
    value, ok := d["key"]
    if ok {
        fmt.Println("Key Present ", value)
    } else {
        fmt.Println(" Key Not Present ")
    }

---

    var empty struct{}
    var ok bool
    var m map[string]struct{}
    m = make(map[string]struct{})
    m["somestring"] = empty


    _, ok = m["somestring"]
    fmt.Println("somestring exists?", ok) 
    _, ok = m["not"]
    fmt.Println("not exists?", ok)

Then, go run maps.go somestring exists? true not exists? false

---

It is mentioned under "Index expressions".

An index expression on a map a of type map[K]V used in an assignment or initialization of the special form v, ok = a[x] v, ok := a[x] var v, ok = a[x] yields an additional untyped boolean value. The value of ok is true if the key x is present in the map, and false otherwise.

---

A two value assignment can be used for this purpose. Please check my sample program below

package main

import (
    "fmt"
)

func main() {
    //creating a map with 3 key-value pairs
    sampleMap := map[string]int{"key1": 100, "key2": 500, "key3": 999}
    //A two value assignment can be used to check existence of a key.
    value, isKeyPresent := sampleMap["key2"]
    //isKeyPresent will be true if key present in sampleMap
    if isKeyPresent {
        //key exist
        fmt.Println("key present, value =  ", value)
    } else {
        //key does not exist
        fmt.Println("key does not exist")
    }
}

---

Example usage: Looping through a slice, for pairMap checking if key exists. It an algorithm to find all pairs that adds to a specific sum.

func findPairs(slice1 []int, sum int) {
    pairMap := make(map[int]int)
    for i, v := range slice1 {
        if valuei, ok := pairMap[v]; ok {
            fmt.Println("Pair Found", i, valuei)
        } else {
            pairMap[sum-v] = i
        }
    }
}

---