Why is exception.printStackTrace() considered bad practice?

Throwable.printStackTrace() writes the stack trace to System.err PrintStream. The System.err stream and the underlying standard "error" output stream of the JVM process can be redirected by

invoking System.setErr() which changes the destination pointed to by System.err.

or by redirecting the process' error output stream. The error output stream may be redirected to a file/device whose contents may be ignored by personnel, the file/device may not be capable of log rotation, inferring that a process restart is required to close the open file/device handle, before archiving the existing contents of the file/device. or the file/device actually discards all data written to it, as is the case of /dev/null.

whose contents may be ignored by personnel,

the file/device may not be capable of log rotation, inferring that a process restart is required to close the open file/device handle, before archiving the existing contents of the file/device.

or the file/device actually discards all data written to it, as is the case of /dev/null.

Inferring from the above, invoking Throwable.printStackTrace() constitutes valid (not good/great) exception handling behavior, only

if you do not have System.err being reassigned throughout the duration of the application's lifetime,

and if you do not require log rotation while the application is running,

and if accepted/designed logging practice of the application is to write to System.err (and the JVM's standard error output stream).

In most cases, the above conditions are not satisfied. One may not be aware of other code running in the JVM, and one cannot predict the size of the log file or the runtime duration of the process, and a well designed logging practice would revolve around writing "machine-parseable" log files (a preferable but optional feature in a logger) in a known destination, to aid in support.

Finally, one ought to remember that the output of Throwable.printStackTrace() would definitely get interleaved with other content written to System.err (and possibly even System.out if both are redirected to the same file/device). This is an annoyance (for single-threaded apps) that one must deal with, for the data around exceptions is not easily parseable in such an event. Worse, it is highly likely that a multi-threaded application will produce very confusing logs as Throwable.printStackTrace() is not thread-safe.

There is no synchronization mechanism to synchronize the writing of the stack trace to System.err when multiple threads invoke Throwable.printStackTrace() at the same time. Resolving this actually requires your code to synchronize on the monitor associated with System.err (and also System.out, if the destination file/device is the same), and that is rather heavy price to pay for log file sanity. To take an example, the ConsoleHandler and StreamHandler classes are responsible for appending log records to console, in the logging facility provided by java.util.logging; the actual operation of publishing log records is synchronized - every thread that attempts to publish a log record must also acquire the lock on the monitor associated with the StreamHandler instance. If you wish to have the same guarantee of having non-interleaved log records using System.out/System.err, you must ensure the same - the messages are published to these streams in a serializable manner.

Considering all of the above, and the very restricted scenarios in which Throwable.printStackTrace() is actually useful, it often turns out that invoking it is a bad practice.

Extending the argument in the one of the previous paragraphs, it is also a poor choice to use Throwable.printStackTrace in conjunction with a logger that writes to the console. This is in part, due to the reason that the logger would synchronize on a different monitor, while your application would (possibly, if you don't want interleaved log records) synchronize on a different monitor. The argument also holds good when you use two different loggers that write to the same destination, in your application.

---

You are touching multiple issues here:

1) A stack trace should never be visibile to end users (for user experience and security purposes)

Yes, it should be accessible to diagnose problems of end-users, but end-user should not see them for two reasons:

They are very obscure and unreadable, the application will look very user-unfriendly.

Showing a stack trace to end-user might introduce a potential security risk. Correct me if I'm wrong, PHP actually prints function parameters in stack trace - brilliant, but very dangerous - if you would you get exception while connecting to the database, what are you likely to in the stacktrace?

2) Generating a stack trace is a relatively expensive process (though unlikely to be an issue in most 'exception'al circumstances)

Generating a stack trace happens when the exception is being created/thrown (that's why throwing an exception comes with a price), printing is not that expensive. In fact you can override Throwable#fillInStackTrace() in your custom exception effectively making throwing an exception almost as cheap as a simple GOTO statement.

3) Many logging frameworks will print the stack trace for you (ours does not and no, we can't change it easily)

Very good point. The main issue here is: if the framework logs the exception for you, do nothing (but make sure it does!) If you want to log the exception yourself, use logging framework like Logback or Log4J, to not put them on the raw console because it is very hard to control it.

With logging framework you can easily redirect stack traces to file, console or even send them to a specified e-mail address. With hardcoded printStackTrace() you have to live with the sysout.

4) Printing the stack trace does not constitute error handling. It should be combined with other information logging and exception handling.

Again: log SQLException correctly (with the full stack trace, using logging framework) and show nice: "Sorry, we are currently not able to process your request" message. Do you really think the user is interested in the reasons? Have you seen StackOverflow error screen? It's very humorous, but does not reveal any details. However it ensures the user that the problem will be investigated.

But he will call you immediately and you need to be able to diagnose the problem. So you need both: proper exception logging and user-friendly messages.

To wrap things up: always log exceptions (preferably using logging framework), but do not expose them to the end-user. Think carefully and about error-messages in your GUI, show stack traces only in development mode.

---

First thing printStackTrace() is not expensive as you state, because the stack trace is filled when the exception is created itself.

The idea is to pass anything that goes to logs through a logger framework, so that the logging can be controlled. Hence instead of using printStackTrace, just use something like Logger.log(msg, exception);

---

Printing the exception's stack trace in itself doesn't constitute bad practice, but only printing the stace trace when an exception occurs is probably the issue here -- often times, just printing a stack trace is not enough.

Also, there's a tendency to suspect that proper exception handling is not being performed if all that is being performed in a catch block is a e.printStackTrace. Improper handling could mean at best an problem is being ignored, and at worst a program that continues executing in an undefined or unexpected state.

Example

Let's consider the following example:

try {
  initializeState();

} catch (TheSkyIsFallingEndOfTheWorldException e) {
  e.printStackTrace();
}

continueProcessingAssumingThatTheStateIsCorrect();

Here, we want to do some initialization processing before we continue on to some processing that requires that the initialization had taken place.

In the above code, the exception should have been caught and properly handled to prevent the program from proceeding to the continueProcessingAssumingThatTheStateIsCorrect method which we could assume would cause problems.

In many instances, e.printStackTrace() is an indication that some exception is being swallowed and processing is allowed to proceed as if no problem every occurred.

Why has this become a problem?

Probably one of the biggest reason that poor exception handling has become more prevalent is due to how IDEs such as Eclipse will auto-generate code that will perform a e.printStackTrace for the exception handling:

try {
  Thread.sleep(1000);
} catch (InterruptedException e) {
  // TODO Auto-generated catch block
  e.printStackTrace();
}

(The above is an actual try-catch auto-generated by Eclipse to handle an InterruptedException thrown by Thread.sleep.)

For most applications, just printing the stack trace to standard error is probably not going to be sufficient. Improper exception handling could in many instances lead to an application running in a state that is unexpected and could be leading to unexpected and undefined behavior.

---

I think your list of reasons is a pretty comprehensive one.

One particularly bad example that I've encountered more than once goes like this:

    try {
      // do stuff
    } catch (Exception e) {
        e.printStackTrace(); // and swallow the exception
    }

The problem with the above code is that the handling consists entirely of the printStackTrace call: the exception isn't really handled properly nor is it allowed to escape.

On the other hand, as a rule I always log the stack trace whenever there's an unexpected exception in my code. Over the years this policy has saved me a lot of debugging time.

Finally, on a lighter note, God's Perfect Exception.

---

printStackTrace() prints to a console. In production settings, nobody is ever watching at that. Suraj is correct, should pass this information to a logger.

---

It is not bad practice because something is 'wrong' about PrintStackTrace(), but because it's 'code smell'. Most of the time the PrintStackTrace() call is there because somebody failed to properly handle the exception. Once you deal with the exception in a proper way you generally don't care about the StackTrace any more.

Additionally, displaying the stacktrace on stderr is generally only useful when debugging, not in production because very often stderr goes nowhere. Logging it makes more sense. But just replacing PrintStackTrace() with logging the exception still leaves you with an application which failed but keeps running like nothing happened.

---

In server applications the stacktrace blows up your stdout/stderr file. It may become larger and larger and is filled with useless data because usually you have no context and no timestamp and so on.

e.g. catalina.out when using tomcat as container

---

As some guys already mentioned here the problem is with the exception swallowing in case you just call e.printStackTrace() in the catch block. It won't stop the thread execution and will continue after the try block as in normal condition.

Instead of that you need either try to recover from the exception (in case it is recoverable), or to throw RuntimeException, or to bubble the exception to the caller in order to avoid silent crashes (for example, due to improper logger configuration).

---