How do I delete a commit from a branch?

Careful: git reset --hard WILL DELETE YOUR WORKING DIRECTORY CHANGES. Be sure to stash any local changes you want to keep before running this command.

Assuming you are sitting on that commit, then this command will wack it...

git reset --hard HEAD~1

The HEAD~1 means the commit before head.

Or, you could look at the output of git log, find the commit id of the commit you want to back up to, and then do this:

git reset --hard <sha1-commit-id>

If you already pushed it, you will need to do a force push to get rid of it...

git push origin HEAD --force

However, if others may have pulled it, then you would be better off starting a new branch. Because when they pull, it will just merge it into their work, and you will get it pushed back up again.

If you already pushed, it may be better to use git revert, to create a "mirror image" commit that will undo the changes. However, both commits will be in the log.

FYI -- git reset --hard HEAD is great if you want to get rid of WORK IN PROGRESS. It will reset you back to the most recent commit, and erase all the changes in your working tree and index.

Lastly, if you need to find a commit that you "deleted", it is typically present in git reflog unless you have garbage collected your repository.

---

If you have not yet pushed the commit anywhere, you can use git rebase -i to remove that commit. First, find out how far back that commit is (approximately). Then do:

git rebase -i HEAD~N

The ~N means rebase the last N commits (N must be a number, for example HEAD~10). Then, you can edit the file that Git presents to you to delete the offending commit. On saving that file, Git will then rewrite all the following commits as if the one you deleted didn't exist.

The Git Book has a good section on rebasing with pictures and examples.

Be careful with this though, because if you change something that you have pushed elsewhere, another approach will be needed unless you are planning to do a force push.

---

Another possibility is one of my personal favorite commands:

git rebase -i <commit>~1

This will start the rebase in interactive mode -i at the point just before the commit you want to whack. The editor will start up listing all of the commits since then. Delete the line containing the commit you want to obliterate and save the file. Rebase will do the rest of the work, deleting only that commit, and replaying all of the others back into the log.

---

I'm appending this answer because I don't see why anyone who has just tried to commit work would want to delete all that work because of some mistake using Git!

If you want to keep your work and just 'undo' that commit command (you caught before pushing to repo):

git reset --soft HEAD~1

Do not use the --hard flag unless you want to destroy your work in progress since the last commit.

---

Removing an entire commit

git rebase -p --onto SHA^ SHA

Obviously replace "SHA" with the reference you want to get rid of. The "^" in that command is literal.

http://sethrobertson.github.io/GitFixUm/fixup.html#change_deep

---

Say we want to remove commits 2 & 4 from the repo. (Higher the the number newer the commit; 0 is the oldest commit and 4 is the latest commit)

commit 0 : b3d92c5
commit 1 : 2c6a45b
commit 2 : <any_hash>
commit 3 : 77b9b82
commit 4 : <any_hash>

Note: You need to have admin rights over the repo since you are using --hard and -f.

git checkout b3d92c5 Checkout the last usable commit.

git checkout -b repair Create a new branch to work on.

git cherry-pick 77b9b82 Run through commit 3.

git cherry-pick 2c6a45b Run through commit 1.

git checkout master Checkout master.

git reset --hard b3d92c5 Reset master to last usable commit.

git merge repair Merge our new branch onto master.

git push -f origin master Push master to the remote repo.

---

If you didn't publish changes, to remove latest commit, you can do

$ git reset --hard HEAD^

(note that this would also remove all uncommitted changes; use with care).

If you already published to-be-deleted commit, use git revert

$ git revert HEAD

---

git rebase -i HEAD~2

Here '2' is the number of commits you want to rebase.

'git rebase -i HEAD`

if you want to rebase all the commits.

Then you will be able to choose one of these options.

p, pick = use commit

r, reword = use commit, but edit the commit message

e, edit = use commit, but stop for amending

s, squash = use commit, but meld into previous commit

f, fixup = like "squash", but discard this commit's log message

x, exec = run command (the rest of the line) using shell

d, drop = remove commit

These lines can be re-ordered; they are executed from top to bottom. If you remove a line here THAT COMMIT WILL BE LOST. However, if you remove everything, the rebase will be aborted. Note that empty commits are commented out

You can simply remove that commit using option "d" or Removing a line that has your commit.

---

git reset --hard commitId

git push <origin> <branch> --force

PS: CommitId refers the one which you want to revert back to

---

Forcefully Change History

Assuming you don't just want to delete the last commit, but you want to delete specific commits of the last n commits, go with:

git rebase -i HEAD~<number of commits to go back>, so git rebase -i HEAD~5 if you want to see the last five commits.

Then in the text editor change the word pick to drop next to every commit you would like to remove. Save and quit the editor. Voila!

Additively Change History

Try git revert <commit hash>. Revert will create a new commit that undoes the specified commit.

---

[Quick Answer]

You have many alternatives, for example:

Alternative 1: git rebase -i ~1 Change YourCommitId for the number of the commit which you want to revert back to.

Alternative 2: git reset --hard YourCommitId git push --force Change YourCommitId for the number of the commit which you want to revert back to. I don't recommend this option because you can lost your work in progress.

Alternative 3: git reset --soft HEAD~1 You can keep your work and only undo the commit.

---

If you want to fix up your latest commit, you can undo the commit, and unstage the files in it, by doing:

git reset HEAD~1

This will return your repository to its state before the git add commands that staged the files. Your changes will be in your working directory. HEAD~1 refers to the commit below the current tip of the branch.

If you want to uncommit N commits, but keep the code changes in your working directory:

git reset HEAD~N

If you want to get rid of your latest commit, and do not want to keep the code changes, you can do a "hard" reset.

git reset --hard HEAD~1

Likewise, if you want to discard the last N commits, and do not want to keep the code changes:

git reset --hard HEAD~N

---

To delete in local branch, use

git reset --hard HEAD~1

To delete in a remote branch, use

git push origin HEAD --force

---

Source: https://gist.github.com/sagarjethi/c07723b2f4fa74ad8bdf229166cf79d8

Delete the last commit

For example your last commit

git push origin +aa61ab32^:master

Now you want to delete this commit then an Easy way to do this following

Steps

First reset the branch to the parent of the current commit Force-push it to the remote.

git reset HEAD^ --hard git push origin -f

For particular commit, you want to reset is following

git reset bb676878^ --hard

git push origin -f

---

Here I just post one clear pipeline to do so

Step1: Use git log to get the commit ID.

git log

https://i.stack.imgur.com/ndzyE.png

Step2: Use git reset to go back to the former version:

git reset --hard <your commit id>

---

All the commands above restore the state of your work tree and index as they were before making the commit, but do not restore the state of the repository. If you look at it, the "removed" commit is not actually removed, it is simply not the one on the tip of the current branch.

I think that there are no means to remove a commit with porcelain commands. The only way is to remove it from the log and reflog and then to execute a git prune --expire -now.

---

Here's another way to do this:

Checkout the branch you want to revert, then reset your local working copy back to the commit that you want to be the latest one on the remote server (everything after it will go bye-bye). To do this, in SourceTree I right-clicked on the and selected "Reset BRANCHNAME to this commit". I think the command line is:

git reset --hard COMMIT_ID

Since you just checked out your branch from remote, you're not going to have any local changes to worry about losing. But this would lose them if you did.

Then navigate to your repository's local directory and run this command:

git -c diff.mnemonicprefix=false -c core.quotepath=false \
push -v -f --tags REPOSITORY_NAME BRANCHNAME:BRANCHNAME

This will erase all commits after the current one in your local repository but only for that one branch.

---

If you want to keep the history, showing the commit and the revert, you should use:

git revert GIT_COMMIT_HASH

enter the message explaining why are you reverting and then:

git push  

When you issue git log you'll see both the "wrong" commit and revert log messages.

---

The mistake:

I git rebase -i --root'ed my branch, ignorantly thinking I could reword the first commit differing from the master (the GitHub for Windows default view is the comparison to master, hiding it's entirety).

I grew a Silicon Valley beard while 900+ commits loaded themselves into Sublime. Exiting with no changes, I charged my battery then proceeded to shave, as all 900+ individual commits nonchalantly rebased - resetting their commit times to now.

Determined to beat Git and preserve the original times, I deleted this local repository and re-cloned from the remote.

Now it had re-added a most recent unneeded commit to master I wished to remove, so proceeded like so.

Exhausting the options:

I didn't wish to git revert - it would create an additional commit, giving Git the upper hand.

git reset --hard HEAD did nothing, after checking the reflog, the last and only HEAD was the clone - Git wins.

To get the most recent SHA, I checked the remote repository on github.com - minor win.

After thinking git reset --hard <SHA> had worked, I updated another branch to master and 1... 2... poof! the commit was back - Git wins.

Checking back out to master, time to try git rebase -i <SHA>, then remove the line... to no avail, sad to say. "If you remove a line here THAT COMMIT WILL BE LOST". Ah...glossed over new feature troll the n00b in the 2.8.3 release notes.

The solution:

git rebase -i <SHA> then d, drop = remove commit.

To verify, I checked out to another branch, and voila - no hiding commit to fetch/pull from the master.

https://twitter.com/holman/status/706006896273063936

Good day to you.

---

If you just messed up your last commit (wrong message, forgot to add some changes) and want to fix it before pushing it to a public repo why not use:

git commit --amend -m "New message here"

If you have newly staged changes they'll be combined with the last commit (that you're trying to get rid of) and will replace that commit.

Of course if you amend a commit after you've pushed it, you're rewriting history so if you do that be sure to understand the implications.

You can also pass the '--no-edit' option instead of '-m' if you would prefer to use the previous commit's message.

Docs: http://git-scm.com/docs/git-commit.html

---

If you've already pushed, first find the commit you want to be at HEAD ($GIT_COMMIT_HASH_HERE), then run the following:

git reset --hard $GIT_COMMIT_HASH_HERE
git push origin HEAD --force

Then each place the repo has been cloned, run:

git reset --hard origin/master

---

What I do usually when I commit and push (if anyone pushed his commit this solve the problem):

git reset --hard HEAD~1

git push -f origin

hope this help

---

Reset on local branch

git reset --hard HEAD~<Number of commit> So git reset --hard HEAD~3

Force push to origin

git push -f origin

---

I have already pushed. Need to return some commits back remotly. Have tried many variations, but only this from Justin via git bush is working fine for me:

git reset --hard $GIT_COMMIT_HASH_HERE
git push origin HEAD --force

---

// display git commit log    
$ git log --pretty=oneline --abbrev-commit

// show last two commit and open in your default editor
// then delete second commit line and save it
$ git rebase -i HEAD~2

Reference: How to delete a commit in git, local and remote

---

git reset --hard HEAD~1
You will be now at previous head. Pull the branch. Push new code. Commit will be removed from git

---

Take backup of your code in to temp folder. Following command will reset same as server.

git reset --hard HEAD
git clean -f
git pull

If you want to keep your changes , and remove recent commits

git reset --soft HEAD^
git pull

---

If you're an IntelliJ user, the interface is simply awesome. With a single click, you can see the effect immediately at the same time. Shortcut to this place: Cmd + 9 on MacOS.

https://i.stack.imgur.com/qUdqU.png

---

https://i.stack.imgur.com/ilul5.png

As you can see on above image i want to delete revert"test change 2" commit(SHA1 ID: 015b5220c50e3dfbb1063f23789d92ae1d3481a2(you can get SHA1 ID by using gitk command in git bash)).

For that i can use(all below command work on local only. you need to push after delete):

git reset --hard 515b5220c50e3dfbb1063f23789d92ae1d3481a2 //it back-up you to that commit (SHA1 ID of test change 4 commit is 515b5220c50e3dfbb1063f23789d92ae1d3481a2) git reset --hard HEAD~1 // it back-up you before one commit. git reset --hard HEAD^ // To remove the last commit from git

after delete:

https://i.stack.imgur.com/aEPtg.png

---

git reset --hard

git push origin HEAD --force

If one or more of the commits is tagged, delete the tag(s) first. Otherwise the tagged commit is not removed.

---