Using the RUN instruction in a Dockerfile with 'source' does not work

Original Answer

FROM ubuntu:14.04
RUN rm /bin/sh && ln -s /bin/bash /bin/sh

This should work for every Ubuntu docker base image. I generally add this line for every Dockerfile I write.

Edit by a concerned bystander

If you want to get the effect of "use bash instead of sh throughout this entire Dockerfile", without altering and possibly damaging* the OS inside the container, you can just tell Docker your intention. That is done like so:

SHELL ["/bin/bash", "-c"]

* The possible damage is that many scripts in Linux (on a fresh Ubuntu install grep -rHInE '/bin/sh' / returns over 2700 results) expect a fully POSIX shell at /bin/sh. The bash shell isn't just POSIX plus extra builtins. There are builtins (and more) that behave entirely different than those in POSIX. I FULLY support avoiding POSIX (and the fallacy that any script that you didn't test on another shell is going to work because you think you avoided basmisms) and just using bashism. But you do that with a proper shebang in your script. Not by pulling the POSIX shell out from under the entire OS. (Unless you have time to verify all 2700 plus scripts that come with Linux plus all those in any packages you install.)

More detail in this answer below. https://stackoverflow.com/a/45087082/117471

The default shell for the RUN instruction is ["/bin/sh", "-c"].

RUN "source file"      # translates to: RUN /bin/sh -c "source file"

Using SHELL instruction, you can change default shell for subsequent RUN instructions in Dockerfile:

SHELL ["/bin/bash", "-c"] 

Now, default shell has changed and you don't need to explicitly define it in every RUN instruction

RUN "source file"    # now translates to: RUN /bin/bash -c "source file"

Additional Note: You could also add --login option which would start a login shell. This means ~/.bashrc for example would be read and you don't need to source it explicitly before your command

Simplest way is to use the dot operator in place of source, which is the sh equivalent of the bash source command:

Instead of:

RUN source /usr/local/bin/virtualenvwrapper.sh

Use:

RUN . /usr/local/bin/virtualenvwrapper.sh

I had the same problem and in order to execute pip install inside virtualenv I had to use this command:

RUN pip install virtualenv virtualenvwrapper
RUN mkdir -p /opt/virtualenvs
ENV WORKON_HOME /opt/virtualenvs
RUN /bin/bash -c "source /usr/local/bin/virtualenvwrapper.sh \
    && mkvirtualenv myapp \
    && workon myapp \
    && pip install -r /mycode/myapp/requirements.txt"

I hope it helps.

If you are using Docker 1.12 or newer, just use SHELL !

Short Answer:

general:

SHELL ["/bin/bash", "-c"] 

for python vituralenv:

SHELL ["/bin/bash", "-c", "source /usr/local/bin/virtualenvwrapper.sh"]

Long Answer:

from https://docs.docker.com/engine/reference/builder/#shell

SHELL ["executable", "parameters"] The SHELL instruction allows the default shell used for the shell form of commands to be overridden. The default shell on Linux is ["/bin/sh", "-c"], and on Windows is ["cmd", "/S", "/C"]. The SHELL instruction must be written in JSON form in a Dockerfile. The SHELL instruction is particularly useful on Windows where there are two commonly used and quite different native shells: cmd and powershell, as well as alternate shells available including sh. The SHELL instruction can appear multiple times. Each SHELL instruction overrides all previous SHELL instructions, and affects all subsequent instructions. For example: FROM microsoft/windowsservercore # Executed as cmd /S /C echo default RUN echo default # Executed as cmd /S /C powershell -command Write-Host default RUN powershell -command Write-Host default # Executed as powershell -command Write-Host hello SHELL ["powershell", "-command"] RUN Write-Host hello # Executed as cmd /S /C echo hello SHELL ["cmd", "/S"", "/C"] RUN echo hello The following instructions can be affected by the SHELL instruction when the shell form of them is used in a Dockerfile: RUN, CMD and ENTRYPOINT. The following example is a common pattern found on Windows which can be streamlined by using the SHELL instruction: ... RUN powershell -command Execute-MyCmdlet -param1 "c:\foo.txt" ... The command invoked by docker will be: cmd /S /C powershell -command Execute-MyCmdlet -param1 "c:\foo.txt" This is inefficient for two reasons. First, there is an un-necessary cmd.exe command processor (aka shell) being invoked. Second, each RUN instruction in the shell form requires an extra powershell -command prefixing the command. To make this more efficient, one of two mechanisms can be employed. One is to use the JSON form of the RUN command such as: ... RUN ["powershell", "-command", "Execute-MyCmdlet", "-param1 \"c:\\foo.txt\""] ... While the JSON form is unambiguous and does not use the un-necessary cmd.exe, it does require more verbosity through double-quoting and escaping. The alternate mechanism is to use the SHELL instruction and the shell form, making a more natural syntax for Windows users, especially when combined with the escape parser directive: # escape=` FROM microsoft/nanoserver SHELL ["powershell","-command"] RUN New-Item -ItemType Directory C:\Example ADD Execute-MyCmdlet.ps1 c:\example\ RUN c:\example\Execute-MyCmdlet -sample 'hello world' Resulting in: PS E:\docker\build\shell> docker build -t shell . Sending build context to Docker daemon 4.096 kB Step 1/5 : FROM microsoft/nanoserver ---> 22738ff49c6d Step 2/5 : SHELL powershell -command ---> Running in 6fcdb6855ae2 ---> 6331462d4300 Removing intermediate container 6fcdb6855ae2 Step 3/5 : RUN New-Item -ItemType Directory C:\Example ---> Running in d0eef8386e97 Directory: C:\ Mode LastWriteTime Length Name ---- ------------- ------ ---- d----- 10/28/2016 11:26 AM Example ---> 3f2fbf1395d9 Removing intermediate container d0eef8386e97 Step 4/5 : ADD Execute-MyCmdlet.ps1 c:\example\ ---> a955b2621c31 Removing intermediate container b825593d39fc Step 5/5 : RUN c:\example\Execute-MyCmdlet 'hello world' ---> Running in be6d8e63fe75 hello world ---> 8e559e9bf424 Removing intermediate container be6d8e63fe75 Successfully built 8e559e9bf424 PS E:\docker\build\shell> The SHELL instruction could also be used to modify the way in which a shell operates. For example, using SHELL cmd /S /C /V:ON|OFF on Windows, delayed environment variable expansion semantics could be modified. The SHELL instruction can also be used on Linux should an alternate shell be required such as zsh, csh, tcsh and others. The SHELL feature was added in Docker 1.12.

Building on the answers on this page I would add that you have to be aware that each RUN statement runs independently of the others with /bin/sh -c and therefore won't get any environment vars that would normally be sourced in login shells.

The best way I have found so far is to add the script to /etc/bash.bashrc and then invoke each command as bash login.

RUN echo "source /usr/local/bin/virtualenvwrapper.sh" >> /etc/bash.bashrc
RUN /bin/bash --login -c "your command"

You could for instance install and setup virtualenvwrapper, create the virtual env, have it activate when you use a bash login, and then install your python modules into this env:

RUN pip install virtualenv virtualenvwrapper
RUN mkdir -p /opt/virtualenvs
ENV WORKON_HOME /opt/virtualenvs
RUN echo "source /usr/local/bin/virtualenvwrapper.sh" >> /etc/bash.bashrc
RUN /bin/bash --login -c "mkvirtualenv myapp"
RUN echo "workon mpyapp" >> /etc/bash.bashrc
RUN /bin/bash --login -c "pip install ..."

Reading the manual on bash startup files helps understand what is sourced when.

According to https://docs.docker.com/engine/reference/builder/#run the default [Linux] shell for RUN is /bin/sh -c. You appear to be expecting bashisms, so you should use the "exec form" of RUN to specify your shell.

RUN ["/bin/bash", "-c", "source /usr/local/bin/virtualenvwrapper.sh"]

Otherwise, using the "shell form" of RUN and specifying a different shell results in nested shells.

# don't do this...
RUN /bin/bash -c "source /usr/local/bin/virtualenvwrapper.sh"
# because it is the same as this...
RUN ["/bin/sh", "-c", "/bin/bash" "-c" "source /usr/local/bin/virtualenvwrapper.sh"]

If you have more than 1 command that needs a different shell, you should read https://docs.docker.com/engine/reference/builder/#shell and change your default shell by placing this before your RUN commands:

SHELL ["/bin/bash", "-c"]

Finally, if you have placed anything in the root user's .bashrc file that you need, you can add the -l flag to the SHELL or RUN command to make it a login shell and ensure that it gets sourced.

Note: I have intentionally ignored the fact that it is pointless to source a script as the only command in a RUN.

According to Docker documentation

To use a different shell, other than ‘/bin/sh’, use the exec form passing in the desired shell. For example, RUN ["/bin/bash", "-c", "echo hello"]

See https://docs.docker.com/engine/reference/builder/#run

I also had issues in running source in a Dockerfile

This runs perfectly fine for building CentOS 6.6 Docker container, but gave issues in Debian containers

RUN cd ansible && source ./hacking/env-setup

This is how I tackled it, may not be an elegant way but this is what worked for me

RUN echo "source /ansible/hacking/env-setup" >> /tmp/setup
RUN /bin/bash -C "/tmp/setup"
RUN rm -f /tmp/setup

If you have SHELL available you should go with this answer -- don't use the accepted one, which forces you to put the rest of the dockerfile in one command per this comment.

If you are using an old Docker version and don't have access to SHELL, this will work so long as you don't need anything from .bashrc (which is a rare case in Dockerfiles):

ENTRYPOINT ["bash", "--rcfile", "/usr/local/bin/virtualenvwrapper.sh", "-ci"]

Note the -i is needed to make bash read the rcfile at all.

You might want to run bash -v to see what's being sourced.

I would do the following instead of playing with symlinks:

RUN echo "source /usr/local/bin/virtualenvwrapper.sh" >> /etc/bash.bashrc

This might be happening because source is a built-in to bash rather than a binary somewhere on the filesystem. Is your intention for the script you're sourcing to alter the container afterward?

I ended up putting my env stuff in .profile and mutated SHELL something like

SHELL ["/bin/bash", "-c", "-l"]

# Install ruby version specified in .ruby-version
RUN rvm install $(<.ruby-version)

# Install deps
RUN rvm use $(<.ruby-version) && gem install bundler && bundle install

CMD rvm use $(<.ruby-version) && ./myscript.rb

If you're just trying to use pip to install something into the virtualenv, you can modify the PATH env to look in the virtualenv's bin folder first

ENV PATH="/path/to/venv/bin:${PATH}"

Then any pip install commands that follow in the Dockerfile will find /path/to/venv/bin/pip first and use that, which will install into that virtualenv and not the system python.

Here is an example Dockerfile leveraging several clever techniques to all you to run a full conda environment for every RUN stanza. You can use a similar approach to execute any arbitrary prep in a script file.

Note: there is a lot of nuance when it comes to login/interactive vs nonlogin/noninteractive shells, signals, exec, the way multiple args are handled, quoting, how CMD and ENTRYPOINT interact, and a million other things, so don't be discouraged if when hacking around with these things, stuff goes sideways. I've spent many frustrating hours digging through all manner of literature and I still don't quite get how it all clicks.

## Conda with custom entrypoint from base ubuntu image
## Build with e.g. `docker build -t monoconda .`
## Run with `docker run --rm -it monoconda bash` to drop right into
## the environment `foo` !
FROM ubuntu:18.04

## Install things we need to install more things
RUN apt-get update -qq &&\
    apt-get install -qq curl wget git &&\
    apt-get install -qq --no-install-recommends \
        libssl-dev \
        software-properties-common \
    && rm -rf /var/lib/apt/lists/*

## Install miniconda
RUN wget -nv https://repo.anaconda.com/miniconda/Miniconda3-4.7.12-Linux-x86_64.sh -O ~/miniconda.sh && \
    /bin/bash ~/miniconda.sh -b -p /opt/conda && \
    rm ~/miniconda.sh && \
    /opt/conda/bin/conda clean -tipsy && \
    ln -s /opt/conda/etc/profile.d/conda.sh /etc/profile.d/conda.sh

## add conda to the path so we can execute it by name
ENV PATH=/opt/conda/bin:$PATH

## Create /entry.sh which will be our new shell entry point. This performs actions to configure the environment
## before starting a new shell (which inherits the env).
## The exec is important! This allows signals to pass
RUN     (echo '#!/bin/bash' \
    &&   echo '__conda_setup="$(/opt/conda/bin/conda shell.bash hook 2> /dev/null)"' \
    &&   echo 'eval "$__conda_setup"' \
    &&   echo 'conda activate "${CONDA_TARGET_ENV:-base}"' \
    &&   echo '>&2 echo "ENTRYPOINT: CONDA_DEFAULT_ENV=${CONDA_DEFAULT_ENV}"' \
    &&   echo 'exec "$@"'\
        ) >> /entry.sh && chmod +x /entry.sh

## Tell the docker build process to use this for RUN.
## The default shell on Linux is ["/bin/sh", "-c"], and on Windows is ["cmd", "/S", "/C"]
SHELL ["/entry.sh", "/bin/bash", "-c"]
## Now, every following invocation of RUN will start with the entry script
RUN     conda update conda -y

## Create a dummy env
RUN     conda create --name foo

## I added this variable such that I have the entry script activate a specific env
ENV CONDA_TARGET_ENV=foo

## This will get installed in the env foo since it gets activated at the start of the RUN stanza
RUN  conda install pip

## Configure .bashrc to drop into a conda env and immediately activate our TARGET env
RUN conda init && echo 'conda activate "${CONDA_TARGET_ENV:-base}"' >>  ~/.bashrc
ENTRYPOINT ["/entry.sh"]

I've dealing with a similar scenario for an application developed with Django web web framework and these are the steps that worked perfectly for me:

content of my Dockerfile

[mlazo@srvjenkins project_textile]$ cat docker/Dockerfile.debug 
FROM malazo/project_textile_ubuntu:latest 

ENV PROJECT_DIR=/proyectos/project_textile PROJECT_NAME=project_textile WRAPPER_PATH=/usr/share/virtualenvwrapper/virtualenvwrapper.sh

COPY . ${PROJECT_DIR}/
WORKDIR ${PROJECT_DIR}

RUN echo "source ${WRAPPER_PATH}" > ~/.bashrc
SHELL ["/bin/bash","-c","-l"]
RUN     mkvirtualenv -p $(which python3) ${PROJECT_NAME} && \
        workon ${PROJECT_NAME} && \
        pip3 install -r requirements.txt 

EXPOSE 8000

ENTRYPOINT ["tests/container_entrypoint.sh"]
CMD ["public/manage.py","runserver","0:8000"]

content of the ENTRYPOINT file "tests/container_entrypoint.sh":

[mlazo@srvjenkins project_textile]$ cat tests/container_entrypoint.sh
#!/bin/bash
# *-* encoding : UTF-8 *-*
sh tests/deliver_env.sh
source ~/.virtualenvs/project_textile/bin/activate 
exec python "$@"

finally, the way I deploy the container was :

[mlazo@srvjenkins project_textile]$ cat ./tests/container_deployment.sh 
#!/bin/bash

CONT_NAME="cont_app_server"
IMG_NAME="malazo/project_textile_app"
[ $(docker ps -a |grep -i ${CONT_NAME} |wc -l) -gt 0 ] && docker rm -f ${CONT_NAME} 
docker run --name ${CONT_NAME} -p 8000:8000 -e DEBUG=${DEBUG} -e MYSQL_USER=${MYSQL_USER} -e MYSQL_PASSWORD=${MYSQL_PASSWORD} -e MYSQL_HOST=${MYSQL_HOST} -e MYSQL_DATABASE=${MYSQL_DATABASE} -e MYSQL_PORT=${MYSQL_PORT}  -d ${IMG_NAME}

I really hope this would be helpful for somebody else.

Greetings,

I had the same issue. If you also use a python base image you can change the shebang line in your shell script to #!/bin/bash. See for example the container_entrypoint.sh from Manuel Lazo.

This is my solution on "Ubuntu 20.04"

RUN apt -y update
RUN apt -y install curl
SHELL ["/bin/bash", "-c"]
RUN curl -o- https://raw.githubusercontent.com/nvm-sh/nvm/v0.38.0/install.sh | bash
RUN source /root/.bashrc
RUN bash -c ". /root/.nvm/nvm.sh && nvm install v16 && nvm alias default v16 && nvm use default"