Fatal Error: Allowed Memory Size of 134217728 Bytes Exhausted (CodeIgniter + XML-RPC)

Changing the memory_limit by ini_set('memory_limit', '-1'); is not a proper solution. Please don't do that.

Your PHP code may have a memory leak somewhere and you are telling the server to just use all the memory that it wants. You wouldn't have fixed the problem at all. If you monitor your server, you will see that it is now probably using up most of the RAM and even swapping to disk.

You should probably try to track down the offending code in your code and fix it.

ini_set('memory_limit', '-1'); overrides the default PHP memory limit.

The correct way is to edit your php.ini file. Edit memory_limit to your desire value.

As from your question, 128M (which is the default limit) has been exceeded, so there is something seriously wrong with your code as it should not take that much.

If you know why it takes that much and you want to allow it set memory_limit = 512M or higher and you should be good.

The memory allocation for PHP can be adjusted permanently, or temporarily.

Permanently

You can permanently change the PHP memory allocation two ways.

If you have access to your php.ini file, you can edit the value for memory_limit to your desire value.

If you do not have access to your php.ini file (and your webhost allows it), you can override the memory allocation through your .htaccess file. Add php_value memory_limit 128M (or whatever your desired allocation is).

Temporary

You can adjust the memory allocation on the fly from within a PHP file. You simply have the code ini_set('memory_limit', '128M'); (or whatever your desired allocation is). You can remove the memory limit (although machine or instance limits may still apply) by setting the value to "-1".

It's very easy to get memory leaks in a PHP script - especially if you use abstraction, such as an ORM. Try using Xdebug to profile your script and find out where all that memory went.

When adding 22.5 million records into an array with array_push I kept getting "memory exhausted" fatal errors at around 20M records using 4G as the memory limit in file php.ini. To fix this, I added the statement

$old = ini_set('memory_limit', '8192M');

at the top of the file. Now everything is working fine. I do not know if PHP has a memory leak. That is not my job, nor do I care. I just have to get my job done, and this worked.

The program is very simple:

$fh = fopen($myfile);
while (!feof($fh)) {
    array_push($file, stripslashes(fgets($fh)));
}
fclose($fh);

The fatal error points to line 3 until I boosted the memory limit, which eliminated the error.

I kept getting this error, even with memory_limit set in php.ini, and the value reading out correctly with phpinfo().

By changing it from this:

memory_limit=4G

To this:

memory_limit=4096M

This rectified the problem in PHP 7.

When you see the above error - especially if the (tried to allocate __ bytes) is a low value, that could be an indicator of an infinite loop, like a function that calls itself with no way out:

function exhaustYourBytes()
{
    return exhaustYourBytes();
}

You can properly fix this by changing memory_limit on fastcgi/fpm:

$vim /etc/php5/fpm/php.ini

Change memory, like from 128 to 512, see below

; Maximum amount of memory a script may consume (128 MB)
; http://php.net/memory-limit
memory_limit = 128M

to

; Maximum amount of memory a script may consume (128 MB)
; http://php.net/memory-limit
memory_limit = 512M

Your site's root directory:

ini_set('memory_limit', '1024M');

After enabling these two lines, it started working:

; Determines the size of the realpath cache to be used by PHP. This value should
; be increased on systems where PHP opens many files to reflect the quantity of
; the file operations performed.
; http://php.net/realpath-cache-size
realpath_cache_size = 16k

; Duration of time, in seconds for which to cache realpath information for a given
; file or directory. For systems with rarely changing files, consider increasing this
; value.
; http://php.net/realpath-cache-ttl
realpath_cache_ttl = 120

https://content.screencast.com/users/PKMauyra/folders/Jing/media/8afa91fd-d7da-4e62-86f4-571e457e1bf9/2013-12-05_1120.png

Rather than changing the memory_limit value in your php.ini file, if there's a part of your code that could use a lot of memory, you could remove the memory_limit before that section runs, and then replace it after.

$limit = ini_get('memory_limit');
ini_set('memory_limit', -1);
// ... do heavy stuff
ini_set('memory_limit', $limit);

In Drupal 7, you can modify the memory limit in the settings.php file located in your sites/default folder. Around line 260, you'll see this:

ini_set('memory_limit', '128M');

Even if your php.ini settings are high enough, you won't be able to consume more than 128 MB if this isn't set in your Drupal settings.php file.

Just add a ini_set('memory_limit', '-1'); line at the top of your web page.

And you can set your memory as per your need in the place of -1, to 16M, etc..

For Drupal users, this Chris Lane's answer of:

ini_set('memory_limit', '-1');

works but we need to put it just after the opening

<?php

tag in the index.php file in your site's root directory.

Change the memory limit in the php.ini file and restart Apache. After the restart, run the phpinfo(); function from any PHP file for a memory_limit change confirmation.

memory_limit = -1

Memory limit -1 means there is no memory limit set. It's now at the maximum.

PHP 5.3+ allows you to change the memory limit by placing a .user.ini file in the public_html folder. Simply create the above file and type the following line in it:

memory_limit = 64M

Some cPanel hosts only accept this method.

Crash page?

https://i.stack.imgur.com/a2IyM.png

(It happens when MySQL has to query large rows. By default, memory_limit is set to small, which was safer for the hardware.)

You can check your system existing memory status, before increasing php.ini:

# free -m
             total       used       free     shared    buffers     cached
Mem:         64457      63791        666          0       1118      18273
-/+ buffers/cache:      44398      20058
Swap:         1021          0       1021

Here I have increased it as in the following and then do service httpd restart to fix the crash page issue.

# grep memory_limit /etc/php.ini
memory_limit = 512M

For those who are scratching their heads to find out why on earth this little function should cause a memory leak, sometimes by a little mistake, a function starts recursively call itself for ever.

For example, a proxy class that has the same name for a function of the object that is going to proxy it.

class Proxy {

    private $actualObject;

    public function doSomething() {

        return $this->actualObjec->doSomething();
    }
}

Sometimes you may forget to bring that little actualObjec member and because the proxy actually has that doSomething method, PHP wouldn't give you any error and for a large class, it could be hidden from the eyes for a couple of minutes to find out why it is leaking the memory.

I had the error below while running on a dataset smaller than had worked previously.

Fatal error: Allowed memory size of 134217728 bytes exhausted (tried to allocate 4096 bytes) in C:\workspace\image_management.php on line 173

As the search for the fault brought me here, I thought I'd mention that it's not always the technical solutions in previous answers, but something more simple. In my case it was Firefox. Before I ran the program it was already using 1,157 MB.

It turns out that I'd been watching a 50 minute video a bit at a time over a period of days and that messed things up. It's the sort of fix that experts correct without even thinking about it, but for the likes of me it's worth bearing in mind.

Using yield might be a solution as well. See Generator syntax.

Instead of changing the PHP.ini file for a bigger memory storage, sometimes implementing a yield inside a loop might fix the issue. What yield does is instead of dumping all the data at once, it reads it one by one, saving a lot of memory usage.

In my case on mac (Catalina - Xampp) there was no loaded file so I had to do this first.

sudo cp /etc/php.ini.default /etc/php.ini
sudo nano /etc/php.ini

Then change memory_limit = 512M

Then Restart Apache and check if file loaded

php -i | grep php.ini

Result was

Configuration File (php.ini) Path => /etc
Loaded Configuration File => /etc/php.ini

Finally Check

php -r "echo ini_get('memory_limit').PHP_EOL;"

Running the script like this (cron case for example): php5 /pathToScript/info.php produces the same error.

The correct way: php5 -cli /pathToScript/info.php

If you're running a WHM-powered VPS (virtual private server) you may find that you do not have permissions to edit PHP.INI directly; the system must do it. In the WHM host control panel, go to Service Configuration → PHP Configuration Editor and modify memory_limit:

https://i.stack.imgur.com/kewYS.png

I find it useful when including or requiring _dbconnection.php_ and _functions.php in files that are actually processed, rather than including in the header. Which is included in itself.

So if your header and footer is included, simply include all your functional files before the header is included.

The most common cause of this error message for me is omitting the "++" operator from a PHP "for" statement. This causes the loop to continue forever, no matter how much memory you allow to be used. It is a simple syntax error, yet is difficult for the compiler or runtime system to detect. It is easy for us to correct if we think to look for it!

But suppose you want a general procedure for stopping such a loop early and reporting the error? You can simply instrument each of your loops (or at least the innermost loops) as discussed below.

In some cases such as recursion inside exceptions, set_time_limit fails, and the browser keeps trying to load the PHP output, either with an infinite loop or with the fatal error message which is the topic of this question.

By reducing the allowed allocation size near the beginning of your code you might be able to prevent the fatal error, as discussed in the other answers.

Then you may be left with a program that terminates, but is still difficult to debug.

Whether or not your program terminates, instrument your code by inserting BreakLoop() calls inside your program to gain control and find out what loop or recursion in your program is causing the problem.

The definition of BreakLoop is as follows:

function BreakLoop($MaxRepetitions=500,$LoopSite="unspecified")
    {
    static $Sites=[];
    if (!@$Sites[$LoopSite] || !$MaxRepetitions)
        $Sites[$LoopSite]=['n'=>0, 'if'=>0];
    if (!$MaxRepetitions)
        return;
    if (++$Sites[$LoopSite]['n'] >= $MaxRepetitions)
        {
        $S=debug_backtrace(); // array_reverse
        $info=$S[0];
        $File=$info['file'];
        $Line=$info['line'];
        exit("*** Loop for site $LoopSite was interrupted after $MaxRepetitions repetitions. In file $File at line $Line.");
        }
    } // BreakLoop

The $LoopSite argument can be the name of a function in your code. It isn't really necessary, since the error message you will get will point you to the line containing the BreakLoop() call.

In my case it was a brief issue with the way a function was written. A memory leak can be caused by assigning a new value to a function's input variable, e.g.:

/**
* Memory leak function that illustrates unintentional bad code
* @param $variable - input function that will be assigned a new value
* @return null
**/
function doSomehting($variable){
    $variable = 'set value';
    // Or
    $variable .= 'set value';
}

https://i.stack.imgur.com/WaUHE.png

it's too dangerous for a server Your PHP code may have a memory leak somewhere and you are telling the server to just use all the memory that it wants. You wouldn't have fixed the problem at all. If you monitor your server, you will see that it is now probably using up most of the RAM and even swapping to disk.

I spent two dyas looking a solution for this and I figured out that this was cause in a call with PDO when I called

$stmt->bindParam(":PERIOD", $period); 

and the variables period was an

empty string ''

So this issue could have multiple root cause, my advice to you is that try a trial and error or a bisection method for a root cause finding, delete code and the try to search what is the line code that is failing

Update: I also faced this error with the method $pdo->query() I used $pdo->prepare() and worked well, so, while I had

$sql = "SELECT * FROM COURSE_DETAILS where ACTIVE = 1 AND COURSE_DETAILS_ID = $id";
$stmt = getConnection()->query($sql);
$courseDetails = $stmt->fetchAll(PDO::FETCH_ASSOC)

then i changed this to

$sql = "SELECT * FROM COURSE_DETAILS where ACTIVE = 1 AND COURSE_DETAILS_ID = ?";
$stmt = getConnection()->prepare($sql);
$stmt->execute(array($id)); 

and magically the memory error dissapeared!

This question was asked a few years ago, so although my facts are not the same, I also received this error recently when parsing a html table on server within loop. The reason for the error was because the html was parsed using double quotes that was concatenated to a variable $table, while simultaneously concatenating strings on multiline.

$table = "<table>\n";
    $table .= "<tbody>\n";
        foreach ($data as $item) {
            $table .= "<tr>\n";
                // this caused the Fatal Error: Allowed Memory Size of 134217728 Bytes Exhausted
                $table .= "<td>$item->description</td><td>$item->qty</td>" .  
                $table .= "<td>$item->price_incl</td><td>$item->price->vat</td>" .
                $table .= "<td>$item->price_excl</td><td>$item->available</td>" .
            $table .= "</tr>\n";
        }
    $table .= "</tbody>";
$table .= "</table>\n";

The above error was strange to me, but considering that I was already concatenating the string to the $table variable it now seems foolish that I had tried this. Solution was either to remove the variable concatenation on line 7 and 8 or to remove endline concatenation symbol from line 6, 7 and 8.