Insert, on duplicate update in PostgreSQL?

PostgreSQL since version 9.5 has UPSERT syntax, with ON CONFLICT clause. with the following syntax (similar to MySQL)

INSERT INTO the_table (id, column_1, column_2) 
VALUES (1, 'A', 'X'), (2, 'B', 'Y'), (3, 'C', 'Z')
ON CONFLICT (id) DO UPDATE 
  SET column_1 = excluded.column_1, 
      column_2 = excluded.column_2;

Searching postgresql's email group archives for "upsert" leads to finding an example of doing what you possibly want to do, in the manual:

Example 38-2. Exceptions with UPDATE/INSERT This example uses exception handling to perform either UPDATE or INSERT, as appropriate:

CREATE TABLE db (a INT PRIMARY KEY, b TEXT);

CREATE FUNCTION merge_db(key INT, data TEXT) RETURNS VOID AS
$$
BEGIN
    LOOP
        -- first try to update the key
        -- note that "a" must be unique
        UPDATE db SET b = data WHERE a = key;
        IF found THEN
            RETURN;
        END IF;
        -- not there, so try to insert the key
        -- if someone else inserts the same key concurrently,
        -- we could get a unique-key failure
        BEGIN
            INSERT INTO db(a,b) VALUES (key, data);
            RETURN;
        EXCEPTION WHEN unique_violation THEN
            -- do nothing, and loop to try the UPDATE again
        END;
    END LOOP;
END;
$$
LANGUAGE plpgsql;

SELECT merge_db(1, 'david');
SELECT merge_db(1, 'dennis');

There's possibly an example of how to do this in bulk, using CTEs in 9.1 and above, in the hackers mailing list:

WITH foos AS (SELECT (UNNEST(%foo[])).*)
updated as (UPDATE foo SET foo.a = foos.a ... RETURNING foo.id)
INSERT INTO foo SELECT foos.* FROM foos LEFT JOIN updated USING(id)
WHERE updated.id IS NULL;

See a_horse_with_no_name's answer for a clearer example.

---

Warning: this is not safe if executed from multiple sessions at the same time (see caveats below).

Another clever way to do an "UPSERT" in postgresql is to do two sequential UPDATE/INSERT statements that are each designed to succeed or have no effect.

UPDATE table SET field='C', field2='Z' WHERE id=3;
INSERT INTO table (id, field, field2)
       SELECT 3, 'C', 'Z'
       WHERE NOT EXISTS (SELECT 1 FROM table WHERE id=3);

The UPDATE will succeed if a row with "id=3" already exists, otherwise it has no effect.

The INSERT will succeed only if row with "id=3" does not already exist.

You can combine these two into a single string and run them both with a single SQL statement execute from your application. Running them together in a single transaction is highly recommended.

This works very well when run in isolation or on a locked table, but is subject to race conditions that mean it might still fail with duplicate key error if a row is inserted concurrently, or might terminate with no row inserted when a row is deleted concurrently. A SERIALIZABLE transaction on PostgreSQL 9.1 or higher will handle it reliably at the cost of a very high serialization failure rate, meaning you'll have to retry a lot. See why is upsert so complicated, which discusses this case in more detail.

This approach is also subject to lost updates in read committed isolation unless the application checks the affected row counts and verifies that either the insert or the update affected a row.

---

With PostgreSQL 9.1 this can be achieved using a writeable CTE (common table expression):

WITH new_values (id, field1, field2) as (
  values 
     (1, 'A', 'X'),
     (2, 'B', 'Y'),
     (3, 'C', 'Z')

),
upsert as
( 
    update mytable m 
        set field1 = nv.field1,
            field2 = nv.field2
    FROM new_values nv
    WHERE m.id = nv.id
    RETURNING m.*
)
INSERT INTO mytable (id, field1, field2)
SELECT id, field1, field2
FROM new_values
WHERE NOT EXISTS (SELECT 1 
                  FROM upsert up 
                  WHERE up.id = new_values.id)

See these blog entries:

Upserting via Writeable CTE

WAITING FOR 9.1 – WRITABLE CTE

WHY IS UPSERT SO COMPLICATED?

Note that this solution does not prevent a unique key violation but it is not vulnerable to lost updates.
See the follow up by Craig Ringer on dba.stackexchange.com

---

In PostgreSQL 9.5 and newer you can use INSERT ... ON CONFLICT UPDATE.

See the documentation.

A MySQL INSERT ... ON DUPLICATE KEY UPDATE can be directly rephrased to a ON CONFLICT UPDATE. Neither is SQL-standard syntax, they're both database-specific extensions. There are good reasons MERGE wasn't used for this, a new syntax wasn't created just for fun. (MySQL's syntax also has issues that mean it wasn't adopted directly).

e.g. given setup:

CREATE TABLE tablename (a integer primary key, b integer, c integer);
INSERT INTO tablename (a, b, c) values (1, 2, 3);

the MySQL query:

INSERT INTO tablename (a,b,c) VALUES (1,2,3)
  ON DUPLICATE KEY UPDATE c=c+1;

becomes:

INSERT INTO tablename (a, b, c) values (1, 2, 10)
ON CONFLICT (a) DO UPDATE SET c = tablename.c + 1;

Differences:

You must specify the column name (or unique constraint name) to use for the uniqueness check. That's the ON CONFLICT (columnname) DO

The keyword SET must be used, as if this was a normal UPDATE statement

It has some nice features too:

You can have a WHERE clause on your UPDATE (letting you effectively turn ON CONFLICT UPDATE into ON CONFLICT IGNORE for certain values)

The proposed-for-insertion values are available as the row-variable EXCLUDED, which has the same structure as the target table. You can get the original values in the table by using the table name. So in this case EXCLUDED.c will be 10 (because that's what we tried to insert) and "table".c will be 3 because that's the current value in the table. You can use either or both in the SET expressions and WHERE clause.

For background on upsert see How to UPSERT (MERGE, INSERT ... ON DUPLICATE UPDATE) in PostgreSQL?

---

I was looking for the same thing when I came here, but the lack of a generic "upsert" function botherd me a bit so I thought you could just pass the update and insert sql as arguments on that function form the manual

that would look like this:

CREATE FUNCTION upsert (sql_update TEXT, sql_insert TEXT)
    RETURNS VOID
    LANGUAGE plpgsql
AS $$
BEGIN
    LOOP
        -- first try to update
        EXECUTE sql_update;
        -- check if the row is found
        IF FOUND THEN
            RETURN;
        END IF;
        -- not found so insert the row
        BEGIN
            EXECUTE sql_insert;
            RETURN;
            EXCEPTION WHEN unique_violation THEN
                -- do nothing and loop
        END;
    END LOOP;
END;
$$;

and perhaps to do what you initially wanted to do, batch "upsert", you could use Tcl to split the sql_update and loop the individual updates, the preformance hit will be very small see http://archives.postgresql.org/pgsql-performance/2006-04/msg00557.php

the highest cost is executing the query from your code, on the database side the execution cost is much smaller

---

There is no simple command to do it.

The most correct approach is to use function, like the one from docs.

Another solution (although not that safe) is to do update with returning, check which rows were updates, and insert the rest of them

Something along the lines of:

update table
set column = x.column
from (values (1,'aa'),(2,'bb'),(3,'cc')) as x (id, column)
where table.id = x.id
returning id;

assuming id:2 was returned:

insert into table (id, column) values (1, 'aa'), (3, 'cc');

Of course it will bail out sooner or later (in concurrent environment), as there is clear race condition in here, but usually it will work.

Here's a longer and more comprehensive article on the topic.

---

Personally, I've set up a "rule" attached to the insert statement. Say you had a "dns" table that recorded dns hits per customer on a per-time basis:

CREATE TABLE dns (
    "time" timestamp without time zone NOT NULL,
    customer_id integer NOT NULL,
    hits integer
);

You wanted to be able to re-insert rows with updated values, or create them if they didn't exist already. Keyed on the customer_id and the time. Something like this:

CREATE RULE replace_dns AS 
    ON INSERT TO dns 
    WHERE (EXISTS (SELECT 1 FROM dns WHERE ((dns."time" = new."time") 
            AND (dns.customer_id = new.customer_id)))) 
    DO INSTEAD UPDATE dns 
        SET hits = new.hits 
        WHERE ((dns."time" = new."time") AND (dns.customer_id = new.customer_id));

Update: This has the potential to fail if simultaneous inserts are happening, as it will generate unique_violation exceptions. However, the non-terminated transaction will continue and succeed, and you just need to repeat the terminated transaction.

However, if there are tons of inserts happening all the time, you will want to put a table lock around the insert statements: SHARE ROW EXCLUSIVE locking will prevent any operations that could insert, delete or update rows in your target table. However, updates that do not update the unique key are safe, so if you no operation will do this, use advisory locks instead.

Also, the COPY command does not use RULES, so if you're inserting with COPY, you'll need to use triggers instead.

---

I use this function merge

CREATE OR REPLACE FUNCTION merge_tabla(key INT, data TEXT)
  RETURNS void AS
$BODY$
BEGIN
    IF EXISTS(SELECT a FROM tabla WHERE a = key)
        THEN
            UPDATE tabla SET b = data WHERE a = key;
        RETURN;
    ELSE
        INSERT INTO tabla(a,b) VALUES (key, data);
        RETURN;
    END IF;
END;
$BODY$
LANGUAGE plpgsql

---

I custom "upsert" function above, if you want to INSERT AND REPLACE :

`

 CREATE OR REPLACE FUNCTION upsert(sql_insert text, sql_update text)

 RETURNS void AS
 $BODY$
 BEGIN
    -- first try to insert and after to update. Note : insert has pk and update not...

    EXECUTE sql_insert;
    RETURN;
    EXCEPTION WHEN unique_violation THEN
    EXECUTE sql_update; 
    IF FOUND THEN 
        RETURN; 
    END IF;
 END;
 $BODY$
 LANGUAGE plpgsql VOLATILE
 COST 100;
 ALTER FUNCTION upsert(text, text)
 OWNER TO postgres;`

And after to execute, do something like this :

SELECT upsert($$INSERT INTO ...$$,$$UPDATE... $$)

Is important to put double dollar-comma to avoid compiler errors

check the speed...

---

Similar to most-liked answer, but works slightly faster:

WITH upsert AS (UPDATE spider_count SET tally=1 WHERE date='today' RETURNING *)
INSERT INTO spider_count (spider, tally) SELECT 'Googlebot', 1 WHERE NOT EXISTS (SELECT * FROM upsert)

(source: http://www.the-art-of-web.com/sql/upsert/)

---

According the PostgreSQL documentation of the INSERT statement, handling the ON DUPLICATE KEY case is not supported. That part of the syntax is a proprietary MySQL extension.

---

I have the same issue for managing account settings as name value pairs. The design criteria is that different clients could have different settings sets.

My solution, similar to JWP is to bulk erase and replace, generating the merge record within your application.

This is pretty bulletproof, platform independent and since there are never more than about 20 settings per client, this is only 3 fairly low load db calls - probably the fastest method.

The alternative of updating individual rows - checking for exceptions then inserting - or some combination of is hideous code, slow and often breaks because (as mentioned above) non standard SQL exception handling changing from db to db - or even release to release.

 #This is pseudo-code - within the application:
 BEGIN TRANSACTION - get transaction lock
 SELECT all current name value pairs where id = $id into a hash record
 create a merge record from the current and update record
  (set intersection where shared keys in new win, and empty values in new are deleted).
 DELETE all name value pairs where id = $id
 COPY/INSERT merged records 
 END TRANSACTION

---

CREATE OR REPLACE FUNCTION save_user(_id integer, _name character varying)
  RETURNS boolean AS
$BODY$
BEGIN
    UPDATE users SET name = _name WHERE id = _id;
    IF FOUND THEN
        RETURN true;
    END IF;
    BEGIN
        INSERT INTO users (id, name) VALUES (_id, _name);
    EXCEPTION WHEN OTHERS THEN
            UPDATE users SET name = _name WHERE id = _id;
        END;
    RETURN TRUE;
END;

$BODY$
  LANGUAGE plpgsql VOLATILE STRICT

---

For merging small sets, using the above function is fine. However, if you are merging large amounts of data, I'd suggest looking into http://mbk.projects.postgresql.org

The current best practice that I'm aware of is:

COPY new/updated data into temp table (sure, or you can do INSERT if the cost is ok) Acquire Lock [optional] (advisory is preferable to table locks, IMO) Merge. (the fun part)

---

Edit: This does not work as expected. Unlike the accepted answer, this produces unique key violations when two processes repeatedly call upsert_foo concurrently.

Eureka! I figured out a way to do it in one query: use UPDATE ... RETURNING to test if any rows were affected:

CREATE TABLE foo (k INT PRIMARY KEY, v TEXT);

CREATE FUNCTION update_foo(k INT, v TEXT)
RETURNS SETOF INT AS $$
    UPDATE foo SET v = $2 WHERE k = $1 RETURNING $1
$$ LANGUAGE sql;

CREATE FUNCTION upsert_foo(k INT, v TEXT)
RETURNS VOID AS $$
    INSERT INTO foo
        SELECT $1, $2
        WHERE NOT EXISTS (SELECT update_foo($1, $2))
$$ LANGUAGE sql;

The UPDATE has to be done in a separate procedure because, unfortunately, this is a syntax error:

... WHERE NOT EXISTS (UPDATE ...)

Now it works as desired:

SELECT upsert_foo(1, 'hi');
SELECT upsert_foo(1, 'bye');
SELECT upsert_foo(3, 'hi');
SELECT upsert_foo(3, 'bye');

---

UPDATE will return the number of modified rows. If you use JDBC (Java), you can then check this value against 0 and, if no rows have been affected, fire INSERT instead. If you use some other programming language, maybe the number of the modified rows still can be obtained, check documentation.

This may not be as elegant but you have much simpler SQL that is more trivial to use from the calling code. Differently, if you write the ten line script in PL/PSQL, you probably should have a unit test of one or another kind just for it alone.

---