How do I pull from a Git repository through an HTTP proxy?

You can also set the HTTP proxy that Git uses in global configuration property http.proxy:

git config --global http.proxy http://proxy.mycompany:80

To authenticate with the proxy:

git config --global http.proxy http://mydomain\\myusername:mypassword@myproxyserver:8080/

(Credit goes to @EugeneKulabuhov and @JaimeReynoso for the authentication format.)

---

There's some great answers on this already. However, I thought I would chip in as some proxy servers require you to authenticate with a user Id and password. Sometimes this can be on a domain.

So, for example if your proxy server configuration is as follows:

Server: myproxyserver
Port: 8080
Username: mydomain\myusername
Password: mypassword

Then, add to your .gitconfig file using the following command:

git config --global http.proxy http://mydomain\\myusername:mypassword@myproxyserver:8080

Don't worry about https. As long as the specified proxy server supports http, and https, then one entry in the config file will suffice.

You can then verify that the command added the entry to your .gitconfig file successfully by doing cat .gitconfig:

At the end of the file you will see an entry as follows:

[http]
    proxy = http://mydomain\\myusername:mypassword@myproxyserver:8080

That's it!

---

What finally worked was setting the http_proxy environment variable. I had set HTTP_PROXY correctly, but git apparently likes the lower-case version better.

---

If you just want to use proxy on a specified repository, don't need on other repositories. The preferable way is the -c, --config <key=value> option when you git clone a repository. e.g.

$ git clone https://chromium.googlesource.com/chromium/tools/depot_tools.git --config "http.proxy=proxyHost:proxyPort"

---

It looks like you're using a mingw compile of Git on windows (or possibly another one I haven't heard about). There are ways to debug this: I believe all of the http proxy work for git is done by curl. Set this environment variable before running git:

GIT_CURL_VERBOSE=1

This should at least give you an idea of what is going on behind the scenes.

---

When your network team does ssl-inspection by rewriting certificates, then using a http url instead of a https one, combined with setting this var worked for me.

git config --global http.proxy http://proxy:8081

---

For me the git:// just doesn't work through the proxy although the https:// does. This caused some bit of headache because I was running scripts that all used git:// so I couldn't just easily change them all. However I found this GEM

git config --global url."https://github.com/".insteadOf git://github.com/

---

You could too edit .gitconfig file located in %userprofile% directory on Windows system (notepad %userprofile%.gitconfig) or in ~ directory on Linux system (vi ~/.gitconfig) and add a http section as below.

Content of .gitconfig file :

[http]
        proxy = http://proxy.mycompany:80

---

This is an old question but if you are on Windows, consider setting HTTPS_PROXY as well if you are retrieving via an https URL. Worked for me!

---

I find neither http.proxy nor GIT_PROXY_COMMAND work for my authenticated http proxy. The proxy is not triggered in either way. But I find a way to work around this.

Install corkscrew, or other alternatives you want. Create a authfile. The format for authfile is: user_name:password, and user_name, password is your username and password to access your proxy. To create such a file, simply run command like this: echo "username:password" > ~/.ssh/authfile. Edit ~/.ssh/config, and make sure its permission is 644: chmod 644 ~/.ssh/config

Take github.com as an example, add the following lines to ~/.ssh/config:

Host    github.com
        HostName        github.com
        ProxyCommand    /usr/local/bin/corkscrew <your.proxy> <proxy port> %h %p <path/to/authfile>
        User            git

Now whenever you do anything with git@github.com, it will use the proxy automatically. You can easily do the same thing to Bitbucket as well.

This is not so elegant as other approaches, but it works like a charm.

---

On Windows, if you don't want to put your password in .gitconfig in the plain text, you can use

Cntml (http://cntlm.sourceforge.net/)

It authenticates you against normal or even Windows NTLM proxy and starts localhost-proxy without authentication.

In order to get it run:

Install Cntml

Configure Cntml according to documentation to pass your proxy authentication

Point git to your new localhost proxy: [http] proxy = http://localhost:3128 # change port as necessary

---

For me what it worked was:

sudo apt-get install socat

Create a file inside your $BIN_PATH/gitproxy with:

#!/bin/sh 
_proxy=192.168.192.1 
_proxyport=3128 
exec socat STDIO PROXY:$_proxy:$1:$2,proxyport=$_proxyport

Dont forget to give it execution permissions

chmod a+x gitproxy

Run following commands to setup environment:

export PATH=$BIN_PATH:$PATH
git config --global core.gitproxy gitproxy

---

Setup proxy to git

command

git config --global http.proxy http://user:password@domain:port

example

git config --global http.proxy http://clairton:123456@proxy.clairtonluz.com.br:8080

---

Set Git credential.helper to wincred.

git config --global credential.helper wincred

Make sure there is only 1 credential.helper

git config -l

If there is more than 1 and it's not set to wincred remove it.

git config --system --unset credential.helper

Now set the proxy with no password.

git config --global http.proxy http://<YOUR WIN LOGIN NAME>@proxy:80

Check that all the settings that you added looks good....

git config --global -l

Now you good to go!

---

I had the same problem, with a slightly different fix: REBUILDING GIT WITH HTTP SUPPORT

The git: protocol did not work through my corporate firewall.

For example, this timed out:

git clone git://github.com/miksago/node-websocket-server.git

curl github.com works just fine, though, so I know my http_proxy environment variable is correct.

I tried using http, like below, but got an immediate error.

git clone http://github.com/miksago/node-websocket-server.git

->>>  fatal: Unable to find remote helper for 'http' <<<-

I tried recompiling git like so:

./configure  --with-curl --with-expat

but still got the fatal error.

Finally, after several frustrating hours, I read the configure file, and saw this:

# Define CURLDIR=/foo/bar if your curl header and library files are in # /foo/bar/include and /foo/bar/lib directories.

I remembered then, that I had not complied curl from source, and so went looking for the header files. Sure enough, they were not installed. That was the problem. Make did not complain about the missing header files. So I did not realize that the --with-curl option did nothing (it is, in fact the default in my version of git).

I did the following to fix it:

Added the headers needed for make: yum install curl-devel (expat-devel-1.95.8-8.3.el5_5.3.i386 was already installed). Removed git from /usr/local (as I want the new install to live there). I simply removed git* from /usr/local/share and /usr/local/libexec Searched for the include dirs containing the curl and expat header files, and then (because I had read through configure) added these to the environment like so: export CURLDIR=/usr/include export EXPATDIR=/usr/include Ran configure with the following options, which, again, were described in the configure file itself, and were also the defaults but what the heck: ./configure --with-curl --with-expat And now http works with git through my corporate firewall: git clone http://github.com/miksago/node-websocket-server.git Cloning into 'node-websocket-server'... * Couldn't find host github.com in the .netrc file, using defaults * About to connect() to proxy proxy.entp.attws.com port 8080 * Trying 135.214.40.30... * connected ...

---

This worked to me.

git config --global http.proxy proxy_user:proxy_passwd@proxy_ip:proxy_port

---

Just to post this as it is the first result on Google, this blog post I found solves the problem for me by updated the curl certificates.

http://www.simplicidade.org/notes/archives/2011/06/github_ssl_ca_errors.html

---

Use proxychains

proxychains git pull ...

update: proxychains is discontinued, use proxychains-ng instead.

---

Worth to mention: Most examples on the net show examples like

git config --global http.proxy proxy_user:proxy_passwd@proxy_ip:proxy_port

So it seems, that - if your proxy needs authentication - you must leave your company-password in the git-config. Which isn't really cool.

But, if you just configure the user without password:

git config --global http.proxy proxy_user@proxy_ip:proxy_port

Git seems (at least on my Windows-machine without credentials-helper) to recognize that and prompts for the proxy-password on repo-access.

---

you can use:

git config --add http.proxy http://user:password@proxy_host:proxy_port

---

The below method works for me:

echo 'export http_proxy=http://username:password@roxy_host:port/' >> ~/.bash_profile
echo 'export https_proxy=http://username:password@roxy_host:port' >> ~/.bash_profile

Zsh note: Modify your ~/.zshenv file instead of ~/.bash_profile.

Ubuntu and Fedora note: Modify your ~/.bashrc file instead of ~/.bash_profile.

---

For Windows

Goto --> C:/Users/user_name/gitconfig

Update gitconfig file with below details

[http]

[https]

proxy = https://your_proxy:your_port

[http]

proxy = http://your_proxy:your_port

How to check your proxy and port number?

Internet Explorer -> Settings -> Internet Options -> Connections -> LAN Settings

---

There is a way to set up a proxy for a specific URL, see the http.<url>.* section in the git config manual. For example, for https://github.com/ one can do

git config --global 'http.https://github.com/.proxy' http://proxy.mycompany:80

---

This isn't a problem with your proxy. It's a problem with github (or git). It fails for me on git-1.6.0.1 on linux as well. Bug is already reported (by you no less).

Make sure to delete your pasties, they're already on google. Edit: Must've been dreaming, i guess you can't delete them. Use Gist instead?

---

$http_proxy is for http://github.com.... $https_proxy is for https://github.com...

---

The above answers worked for me when my proxy doesn't need authentication. If you are using proxy which requires you to authenticate then you may try CCProxy. I have small tutorial on how to set it up here,

http://blog.praveenkumar.co.in/2012/09/proxy-free-windows-xp78-and-mobiles.html

I was able to push, pull, create new repos. Everything worked just fine. Make sure you do a clean uninstall and reinstall of new version if you are facing issues with Git like I did.

---

as @user2188765 has already pointed out, try replacing the git:// protocol of the repository with http[s]://. See also this answer

---

I got around the proxy using https... some proxies don't even check https.

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

c:\git\meantest>git clone http://github.com/linnovate/mean.git
Cloning into 'mean'...
fatal: unable to access 'http://github.com/linnovate/mean.git/': Failed connect
to github.com:80; No error

c:\git\meantest>git clone https://github.com/linnovate/mean.git
Cloning into 'mean'...
remote: Reusing existing pack: 2587, done.
remote: Counting objects: 27, done.
remote: Compressing objects: 100% (24/24), done.
rRemote: Total 2614 (delta 3), reused 4 (delta 0)eceiving objects:  98% (2562/26

Receiving objects: 100% (2614/2614), 1.76 MiB | 305.00 KiB/s, done.
Resolving deltas: 100% (1166/1166), done.
Checking connectivity... done

---

As this was answered by many but This is just for Winodws USER who is behind proxy with auth.

Re-Installing(first failed, Don't remove).

Goto ->
**Windows**
1. msysgit\installer-tmp\etc\gitconfig
    Under [http]
        proxy = http://user:pass@url:port

**Linux**
1. msysgit\installer-tmp\setup-msysgit.sh
      export HTTP_PROXY="http://USER:PASS@proxy.abc.com:8080"

if you have any special char in user/pass use url_encode

---