Vim: insert the same characters across multiple lines

Move the cursor to the n in name. Enter visual block mode (Ctrlv). Press j three times (or 3j) to jump down by 3 lines; G (capital g) to jump to the last line Press I (capital i). Type in vendor_. Note: It will only update the screen in the first line - until Esc is pressed (6.), at which point all lines will be updated. Press Esc.

https://i.stack.imgur.com/T1WBi.gif

An uppercase I must be used rather than a lowercase i, because the lowercase i is interpreted as the start of a text object, which is rather useful on its own, e.g. for selecting inside a tag block (it):

https://i.stack.imgur.com/nlwsZ.gif

---

Another approach is to use the . (dot) command in combination with i.

Move the cursor where you want to start Press i Type in the prefix you want (e.g. vendor_) Press esc. Press j to go down a line Type . to repeat the last edit, automatically inserting the prefix again Alternate quickly between j and .

I find this technique is often faster than the visual block mode for small numbers of additions and has the added benefit that if you don't need to insert the text on every single line in a range you can easily skip them by pressing extra j's.

Note that for large number of contiguous additions, the block approach or macro will likely be superior.

---

Select the lines you want to modify using CtrlV. Press: I: Insert before what's selected. A: Append after what's selected. c: Replace what's selected. Type the new text. Press Esc to apply the changes to all selected lines.

---

I would use a macro to record my actions and would then repeat it.

Put your cursor on the first letter in name. Hit qq to start recording into the q buffer. Hit i to go into insert mode, type vector_, and then hit Esc to leave insert mode. Now hit 0 to go back to the beginning of the line. Now hit j to go down. Now hit q again to stop recording.

You now have a nice macro.

Type 3@q to execute your macro three times to do the rest of the lines.

---

:%s/^/vendor_/

or am I missing something?

---

Updated January 2016

Whilst the accepted answer is a great solution, this is actually slightly fewer keystrokes, and scales better - based in principle on the accepted answer.

Move the cursor to the n in name. Enter visual block mode (ctrlv). Press 3j Press I. Type in vendor_. Press esc.

https://i.stack.imgur.com/ce8e1.gif

Note, this has fewer keystrokes than the accepted answer provided (compare Step 3). We just count the number of j actions to perform.

If you have line numbers enabled (as illustrated above), and know the line number you wish to move to, then step 3 can be changed to #G where # is the wanted line number.

In our example above, this would be 4G. However when dealing with just a few line numbers an explicit count works well.

---

An alternative that can be more flexible:

Example: To enter the text XYZ at the beginning of the line

:%norm IXYZ

What's happening here?

% == Execute on every line

norm == Execute the following keys in normal mode

I == Insert at beginning of line

XYZ == The text you want to enter

Then you hit Enter, and it executes.

Specific to your request:

:%norm Ivendor_

You can also choose a particular range:

:2,4norm Ivendor_

Or execute over a selected visual range:

:'<,'>norm Ivendor_

Or execute for each line that matches a 'target' regex:

:%g/target/norm Ivendor_

---

I wanted to comment out a lot of lines in some config file on a server that only had vi (no nano), so visual method was cumbersome as well Here's how i did that.

Open file vi file Display line numbers :set number! or :set number Then use the line numbers to replace start-of-line with "#", how?

:35,77s/^/#/

Note: the numbers are inclusive, lines from 35 to 77, both included will be modified.

To uncomment/undo that, simply use :35,77s/^#//

If you want to add a text word as a comment after every line of code, you can also use:

:35,77s/$/#test/ (for languages like Python)

:35,77s/;$/;\/\/test/ (for languages like Java)

credits/references:

https://unix.stackexchange.com/questions/84929/uncommenting-multiple-lines-of-code-specified-by-line-numbers-using-vi-or-vim https://unix.stackexchange.com/questions/120615/how-to-comment-multiple-lines-at-once

---

You might also have a use case where you want to delete a block of text and replace it.

Like this

Hello World

Hello World

To

Hello Cool

Hello Cool

You can just visual block select "World" in both lines.

Type c for change - now you will be in insert mode.

Insert the stuff you want and hit escape.

Both get reflected vertically. It works just like 'I', except that it replaces the block with the new text instead of inserting it.

---

Suppose you have this file:

something

name
comment
phone
email

something else
and more ...

You want to add "vendor_" in front of "name", "comment", "phone", and "email", regardless of where they appear in the file.

:%s/\<\(name\|comment\|phone\|email\)\>/vendor_\1/gc

The c flag will prompt you for confirmation. You can drop that if you don't want the prompt.

---

Use Ctrl+V to enter visual block mode
Move Up/Down to select the columns of text in the lines you want to comment.
Then hit Shift+i and type the text you want to insert.
Then hit Esc, wait 1 second and the inserted text will appear on every line

---

Ctrl + v to go to visual block mode Select the lines using the up and down arrow Enter lowercase 3i (press lowercase I three times) I (press capital I. That will take you into insert mode.) Write the text you want to add Esc Press the down arrow

---

I came here to paste in many lines an already copied string. When copy with y we can paste, in the INSERT MODE, pressing Ctrl+r and right after press ''. This will have the same result as being in NORMAL MODE and press p. This is called paste from registry.

Suppose the following text in the buffer:

vendor_something

text
to_receive
the_paste
pattern

Then we can put the cursor pointing to v in vendor_ and press v, move to right using l until select the underscore symbol we want to paste in the text bellow. After that, we can point the cursor at the beginning of "text" (two lines bellow vendor_something) and press Ctrl+v. Then I to go into INSERT MODE where we press 3j Ctrl+r '' Esc. The result of this sequence will be:

vendor_something

vendor_text
vendor_to_receive
vendor_the_paste
vendor_pattern

---

:.,+3s/^/vendor_/

Another example, I needed to just add two spaces to a block of 125 lines, so I used (with cursor positioned at the beginning of the first line of the block):

:.,+125s/^/ /

Worked great.

---

If the change is required in the entire file,

:1,$s/^/vendor_/

If the change is required for only a few lines,

Go to the first line where change is required, and either give the command

:.,ns/^/vendor_/

Substitute n with the line number of the last line in the block.

Or,

:.,+ns/^/vendor_/

Substitute n with number of lines minus 1 in which the change is required.

---