ChatGPT解决这个技术问题 Extra ChatGPT

Separate Back Stack for each tab in Android using Fragments

I'm trying to implement tabs for navigation in an Android app. Since TabActivity and ActivityGroup are deprecated I would like to implement it using Fragments instead.

I know how to set up one fragment for each tab and then switch fragments when a tab is clicked. But how can I have a separate back stack for each tab?

For an example Fragment A and B would be under Tab 1 and Fragment C and D under Tab 2. When the app is started Fragment A is shown and Tab 1 is selected. Then Fragment A might be replaced with Fragment B. When Tab 2 is selected Fragment C should be displayed. If Tab 1 is then selected Fragment B should once again be displayed. At this point it should be possible to use the back button to show Fragment A.

Also, it is important that the state for each tab is maintained when the device is rotated.

BR Martin


M
Michael Celey

I am terribly late to this question . But since this thread has been very informative and helpful to me I thought I better post my two pence here.

I needed a screen flow like this (A minimalistic design with 2 tabs and 2 views in each tab),

tabA
    ->  ScreenA1, ScreenA2
tabB
    ->  ScreenB1, ScreenB2

I had the same requirements in the past, and I did it using TabActivityGroup (which was deprecated at that time too) and Activities. This time I wanted to use Fragments.

So this is how I done it.

1. Create a base Fragment Class

public class BaseFragment extends Fragment {
    AppMainTabActivity mActivity;

    @Override
    public void onCreate(Bundle savedInstanceState) {
        super.onCreate(savedInstanceState);
        mActivity = (AppMainTabActivity) this.getActivity();
    }

    public void onBackPressed(){
    }

    public void onActivityResult(int requestCode, int resultCode, Intent data){
    }
}

All fragments in your app can extend this Base class. If you want to use special fragments like ListFragment you should create a base class for that too. You will be clear about the usage of onBackPressed() and onActivityResult() if you read the post in full..

2. Create some Tab identifiers, accessible everywhere in project

public class AppConstants{
    public static final String TAB_A  = "tab_a_identifier";
    public static final String TAB_B  = "tab_b_identifier";

    //Your other constants, if you have them..
}

nothing to explain here..

3. Ok, Main Tab Activity- Please go through comments in code..

public class AppMainFragmentActivity extends FragmentActivity{
    /* Your Tab host */
    private TabHost mTabHost;

    /* A HashMap of stacks, where we use tab identifier as keys..*/
    private HashMap<String, Stack<Fragment>> mStacks;

    /*Save current tabs identifier in this..*/
    private String mCurrentTab;

    protected void onCreate(Bundle savedInstanceState) {
        super.onCreate(savedInstanceState);
        setContentView(R.layout.app_main_tab_fragment_layout);

        /*  
         *  Navigation stacks for each tab gets created.. 
         *  tab identifier is used as key to get respective stack for each tab
         */
        mStacks             =   new HashMap<String, Stack<Fragment>>();
        mStacks.put(AppConstants.TAB_A, new Stack<Fragment>());
        mStacks.put(AppConstants.TAB_B, new Stack<Fragment>());

        mTabHost                =   (TabHost)findViewById(android.R.id.tabhost);
        mTabHost.setOnTabChangedListener(listener);
        mTabHost.setup();

        initializeTabs();
    }


    private View createTabView(final int id) {
        View view = LayoutInflater.from(this).inflate(R.layout.tabs_icon, null);
        ImageView imageView =   (ImageView) view.findViewById(R.id.tab_icon);
        imageView.setImageDrawable(getResources().getDrawable(id));
        return view;
    }

    public void initializeTabs(){
        /* Setup your tab icons and content views.. Nothing special in this..*/
        TabHost.TabSpec spec    =   mTabHost.newTabSpec(AppConstants.TAB_A);
        mTabHost.setCurrentTab(-3);
        spec.setContent(new TabHost.TabContentFactory() {
            public View createTabContent(String tag) {
                return findViewById(R.id.realtabcontent);
            }
        });
        spec.setIndicator(createTabView(R.drawable.tab_home_state_btn));
        mTabHost.addTab(spec);


        spec                    =   mTabHost.newTabSpec(AppConstants.TAB_B);
        spec.setContent(new TabHost.TabContentFactory() {
            public View createTabContent(String tag) {
                return findViewById(R.id.realtabcontent);
            }
        });
        spec.setIndicator(createTabView(R.drawable.tab_status_state_btn));
        mTabHost.addTab(spec);
    }


    /*Comes here when user switch tab, or we do programmatically*/
    TabHost.OnTabChangeListener listener    =   new TabHost.OnTabChangeListener() {
      public void onTabChanged(String tabId) {
        /*Set current tab..*/
        mCurrentTab                     =   tabId;

        if(mStacks.get(tabId).size() == 0){
          /*
           *    First time this tab is selected. So add first fragment of that tab.
           *    Dont need animation, so that argument is false.
           *    We are adding a new fragment which is not present in stack. So add to stack is true.
           */
          if(tabId.equals(AppConstants.TAB_A)){
            pushFragments(tabId, new AppTabAFirstFragment(), false,true);
          }else if(tabId.equals(AppConstants.TAB_B)){
            pushFragments(tabId, new AppTabBFirstFragment(), false,true);
          }
        }else {
          /*
           *    We are switching tabs, and target tab is already has atleast one fragment. 
           *    No need of animation, no need of stack pushing. Just show the target fragment
           */
          pushFragments(tabId, mStacks.get(tabId).lastElement(), false,false);
        }
      }
    };


    /* Might be useful if we want to switch tab programmatically, from inside any of the fragment.*/
    public void setCurrentTab(int val){
          mTabHost.setCurrentTab(val);
    }


    /* 
     *      To add fragment to a tab. 
     *  tag             ->  Tab identifier
     *  fragment        ->  Fragment to show, in tab identified by tag
     *  shouldAnimate   ->  should animate transaction. false when we switch tabs, or adding first fragment to a tab
     *                      true when when we are pushing more fragment into navigation stack. 
     *  shouldAdd       ->  Should add to fragment navigation stack (mStacks.get(tag)). false when we are switching tabs (except for the first time)
     *                      true in all other cases.
     */
    public void pushFragments(String tag, Fragment fragment,boolean shouldAnimate, boolean shouldAdd){
      if(shouldAdd)
          mStacks.get(tag).push(fragment);
      FragmentManager   manager         =   getSupportFragmentManager();
      FragmentTransaction ft            =   manager.beginTransaction();
      if(shouldAnimate)
          ft.setCustomAnimations(R.anim.slide_in_right, R.anim.slide_out_left);
      ft.replace(R.id.realtabcontent, fragment);
      ft.commit();
    }


    public void popFragments(){
      /*    
       *    Select the second last fragment in current tab's stack.. 
       *    which will be shown after the fragment transaction given below 
       */
      Fragment fragment             =   mStacks.get(mCurrentTab).elementAt(mStacks.get(mCurrentTab).size() - 2);

      /*pop current fragment from stack.. */
      mStacks.get(mCurrentTab).pop();

      /* We have the target fragment in hand.. Just show it.. Show a standard navigation animation*/
      FragmentManager   manager         =   getSupportFragmentManager();
      FragmentTransaction ft            =   manager.beginTransaction();
      ft.setCustomAnimations(R.anim.slide_in_left, R.anim.slide_out_right);
      ft.replace(R.id.realtabcontent, fragment);
      ft.commit();
    }   


    @Override
    public void onBackPressed() {
        if(mStacks.get(mCurrentTab).size() == 1){
          // We are already showing first fragment of current tab, so when back pressed, we will finish this activity..
          finish();
          return;
        }

        /*  Each fragment represent a screen in application (at least in my requirement, just like an activity used to represent a screen). So if I want to do any particular action
         *  when back button is pressed, I can do that inside the fragment itself. For this I used AppBaseFragment, so that each fragment can override onBackPressed() or onActivityResult()
         *  kind of events, and activity can pass it to them. Make sure just do your non navigation (popping) logic in fragment, since popping of fragment is done here itself.
         */
        ((AppBaseFragment)mStacks.get(mCurrentTab).lastElement()).onBackPressed();

        /* Goto previous fragment in navigation stack of this tab */
            popFragments();
    }


    /*
     *   Imagine if you wanted to get an image selected using ImagePicker intent to the fragment. Ofcourse I could have created a public function
     *  in that fragment, and called it from the activity. But couldn't resist myself.
     */
    @Override
    protected void onActivityResult(int requestCode, int resultCode, Intent data) {
        if(mStacks.get(mCurrentTab).size() == 0){
            return;
        }

        /*Now current fragment on screen gets onActivityResult callback..*/
        mStacks.get(mCurrentTab).lastElement().onActivityResult(requestCode, resultCode, data);
    }
}

4. app_main_tab_fragment_layout.xml (In case anyone interested.)

<?xml version="1.0" encoding="utf-8"?>
<TabHost
    xmlns:android="http://schemas.android.com/apk/res/android"
    android:id="@android:id/tabhost"
    android:layout_width="fill_parent"
    android:layout_height="fill_parent">

    <LinearLayout
        android:orientation="vertical"
        android:layout_width="fill_parent"
        android:layout_height="fill_parent">

        <FrameLayout
            android:id="@android:id/tabcontent"
            android:layout_width="0dp"
            android:layout_height="0dp"
            android:layout_weight="0"/>

        <FrameLayout
            android:id="@+android:id/realtabcontent"
            android:layout_width="fill_parent"
            android:layout_height="0dp"
            android:layout_weight="1"/>

        <TabWidget
            android:id="@android:id/tabs"
            android:orientation="horizontal"
            android:layout_width="fill_parent"
            android:layout_height="wrap_content"
            android:layout_weight="0"/>

    </LinearLayout>
</TabHost>

5. AppTabAFirstFragment.java (First fragment in Tab A, simliar for all Tabs)

public class AppTabAFragment extends BaseFragment {
    private Button mGotoButton;

    @Override
    public View onCreateView(LayoutInflater inflater, ViewGroup container,
            Bundle savedInstanceState) {
        View view       =   inflater.inflate(R.layout.fragment_one_layout, container, false);

        mGoToButton =   (Button) view.findViewById(R.id.goto_button);
        mGoToButton.setOnClickListener(listener);

        return view;
    }

    private OnClickListener listener        =   new View.OnClickListener(){
        @Override
        public void onClick(View v){
            /* Go to next fragment in navigation stack*/
            mActivity.pushFragments(AppConstants.TAB_A, new AppTabAFragment2(),true,true);
        }
    }
}

This might not be the most polished and correct way. But it worked beautifully in my case. Also I only had this requirement in portrait mode. I never had to use this code in a project supporting both orientation. So can't say what kind of challenges I face there..

EDIT :

If anyone want a full project, I have pushed a sample project to github.


Storing data for every fragment, recreating every one of them, rebuilding the stacks... so much work for a simple orientation change.
@omegatai completely agree with you.. All the problem arises since Android doesn't manage stack for us (which iOS does and orientation change or tab with multiple fragment is a breeze) and which takes back us to the original discussion in this Q/A thread. No good going back to that now..
@Renjith This is because fragment is recreated every time, when you switch tab.. Dont think for even once that, your fragment is reused across tab switch. when I switch from A tab to B, A tab is freed from memory. So save your data in activity, and every time check whether activity has data before trying to get it from server.
@Krishnabhadra Ok, that sounds much better. Let me correct in case I'm wrong. As per your example, there is only one activity and therefore one bundle. Create adapter instances in the BaseFragment(refering your project) and save data in there. Use them whenever view is to be built.
Got it to work. Thanks a lot. Uploading the whole project was a good idea! :-)
e
epidemian

We had to implement exactly that same behaviour that you describe for an app recently. The screens and overall flow of the application were already defined so we had to stick with it (it's an iOS app clone...). Luckily, we managed to get rid of the on-screen back buttons :)

We hacked the solution using a mixture of TabActivity, FragmentActivities (we were using the support library for fragments) and Fragments. In retrospective, I'm pretty sure it wasn't the best architecture decision, but we managed to get the thing working. If I had to do it again, I'd probably try to do a more activity-based solution (no fragments), or try and have only one Activity for the tabs and let all the rest be views (which I find are much more reusable than activities overall).

So the requirements were to have some tabs and nestable screens in each tab:

tab 1
  screen 1 -> screen 2 -> screen 3
tab 2
  screen 4
tab 3
  screen 5 -> 6

etc...

So say: user starts in tab 1, navigates from screen 1 to screen 2 then to screen 3, he then switches to tab 3 and navigates from screen 4 to 6; if the switched back to tab 1, he should see screen 3 again and if he pressed Back he should return to screen 2; Back again and he is in screen 1; switch to tab 3 and he's in screen 6 again.

The main Activity in the application is MainTabActivity, which extends TabActivity. Each tab is associated with an activity, lets say ActivityInTab1, 2 and 3. And then each screen will be a fragment:

MainTabActivity
  ActivityInTab1
    Fragment1 -> Fragment2 -> Fragment3
  ActivityInTab2
    Fragment4
  ActivityInTab3
    Fragment5 -> Fragment6

Each ActivityInTab holds only one fragment at a time, and knows how to replace one fragment for another one (pretty much the same as an ActvityGroup). The cool thing is that it's quite easy to mantain separate back stacks for each tab this way.

The functionality for each ActivityInTab was quite the same: know how to navigate from one fragment to another and maintain a back stack, so we put that in a base class. Let's call it simply ActivityInTab:

abstract class ActivityInTab extends FragmentActivity { // FragmentActivity is just Activity for the support library.

    @Override
    protected void onCreate(Bundle savedInstanceState) {
        super.onCreate(savedInstanceState);
        setContentView(R.layout.activity_in_tab);
    }

    /**
     * Navigates to a new fragment, which is added in the fragment container
     * view.
     * 
     * @param newFragment
     */
    protected void navigateTo(Fragment newFragment) {
        FragmentManager manager = getSupportFragmentManager();
        FragmentTransaction ft = manager.beginTransaction();

        ft.replace(R.id.content, newFragment);

        // Add this transaction to the back stack, so when the user presses back,
        // it rollbacks.
        ft.addToBackStack(null);
        ft.commit();
    }

}

The activity_in_tab.xml is just this:

<?xml version="1.0" encoding="utf-8"?>
<RelativeLayout
    xmlns:android="http://schemas.android.com/apk/res/android"
    android:id="@+id/content"
    android:layout_width="fill_parent"
    android:layout_height="fill_parent"
    android:isScrollContainer="true">
</RelativeLayout>

As you can see, the view layout for each tab was the same. That's because it's just a FrameLayout called content that will hold each fragment. The fragments are the ones that have each screen's view.

Just for the bonus points, we also added some little code to show a confirm dialog when the user presses Back and there are no more fragments to go back to:

// In ActivityInTab.java...
@Override
public void onBackPressed() {
    FragmentManager manager = getSupportFragmentManager();
    if (manager.getBackStackEntryCount() > 0) {
        // If there are back-stack entries, leave the FragmentActivity
        // implementation take care of them.
        super.onBackPressed();
    } else {
        // Otherwise, ask user if he wants to leave :)
        showExitDialog();
    }
}

That's pretty much the setup. As you can see, each FragmentActivity (or just simply Activity in Android >3) is taking care of all the back-stacking with it's own FragmentManager.

An activity like ActivityInTab1 will be really simple, it'll just show it's first fragment (i.e. screen):

public class ActivityInTab1 extends ActivityInTab {
    @Override
    protected void onCreate(Bundle savedInstanceState) {
        super.onCreate(savedInstanceState);
        navigateTo(new Fragment1());
    }
}

Then, if a fragment needs to navigate to another fragment, it has to do a little nasty casting... but it's not that bad:

// In Fragment1.java for example...
// Need to navigate to Fragment2.
((ActivityIntab) getActivity()).navigateTo(new Fragment2());

So that's pretty much it. I'm pretty sure this is not a very canonical (and mostly sure not very good) solution, so I'd like to ask seasoned Android developers what would be a better approach to acheive this functionality, and if this is not "how it's done" in Android, I'd appreciate if you could point me to some link or material that explains which is the Android way to approach this (tabs, nested screens in tabs, etc). Feel free to tear apart this answer in the comments :)

As a sign that this solution is not very good is that recently I had to add some navigation functionality to the application. Some bizarre button that should take the user from one tab into another and into a nested screen. Doing that programmatically was a pain in the butt, because of who-knows-who problems and dealing with when are fragments and activities actually instantiated and initialized. I think it would have been much easier if those screens and tabs were all just Views really.

Finally, if you need to survive orientation changes, it's important that your fragments are created using setArguments/getArguments. If you set instance variables in your fragments' constructors you'll be screwed. But fortunately that's really easy to fix: just save everything in setArguments in the constructor and then retrieve those things with getArguments in onCreate to use them.


Great answer but I think very few will see this. I choosed exactly the same path (as you can see from conversation in previous answer) and I'm not happy with it just like you. I think Google really screwed up with this fragments since this API doesn't cover major use cases. Another issue you may run into is impossibility to embed fragment into another fragment.
Thanks for the comment boulder. Yeah, I couldn't agree more about the fragments API. I have already run into the problem of nested fragments (that's why we went for the "replace one fragment with another one" approach hehe).
I have implemented this via ALL activities. I didn't like what I got and I'm going to try Fragments. That's the opposite of your experience! There's a lot of implementation with Activities to handle the lifecycle of child views in each tab and also to implement your own back button. Also, you can't just keep a reference to all views or you will blow up memory. I hope Fragments will: 1) Support the lifecycle of the Fragments with clear separation of memory and 2) help implement the back button functionality Plus, if you use fragments for this process won't it be easier to run on Tablets?
What happens when the user switches tabs? Does the Fragment backstack get deleted? How to make sure the backstack remains?
@gregm If you go 1 tab <-> 1 activity like I did, the backstack for each tab will remain when tabs are switched because the activities are actually kept alive; they are only paused and resumed. I don't know if there is a way to make the activities be destroyed and re-created when tabs are switched in a TabActivity. However, if you make the fragments inside the activities be replaced like I suggested, they are destroyed (and re-created when the backstack is popped). So you will have at most one fragment alive per tab at any time.
h
hackbod

The framework won't currently do this for you automatically. You will need to build and manage your own back stacks for each tab.

To be honest, this seems like a really questionable thing to do. I can't imagine it resulting in a decent UI -- if the back key is going to do different things depending on the tab I am, especially if the back key also has its normal behavior of closing the entire activity when at the top of the stack... sounds nasty.

If you are trying to build something like a web browser UI, to get a UX that is natural to the user is going to involve a lot of subtle tweaks of behavior depending on context, so you'll definitely need to do your own back stack management rather than rely on some default implementation in the framework. For an example try paying attention to how the back key interacts with the standard browser in the various ways you can go in and out of it. (Each "window" in the browser is essentially a tab.)


Don't do that. And the framework is hardly useless. It doesn't give you automatic support for this kind of thing, which as I said I can't imagine resulting in a decent user experience except in very specialized situations where you are will need to carefully control the back behavior anyway.
This type of navigation, then you have tabs and hierarchy of pages on each tab is very common for iPhone applications for example (you can check App Store and iPod apps). I find their user experience quite decent.
This is insane. The iPhone doesn't even have a back button. There are API demos showing very simple code to implement fragments in tabs. The question being asked was about having different back stacks for each tab, and my response is that the framework doen't supply this automatically because semantically for what the back button does it would most likely be a crappy user experience. You can fairly easily implement back semantics yourself if you want though.
Again, the iPhone doesn't have a back button, so it doesn't semantically have back stack behavior like Android. Also "better to just stick with activities and save myself a lot of time" doesn't make any sense here, because activities don't let you put maintain tabs in a UI with their own different back stacks; in fact back stack management of activities is less flexible than what is provided by the Fragment framework.
@hackbod I am trying to follow your points, but have been having trouble implementing custom back-stack behaviour. I realise that having been involved in the design of this, you would have a solid insight into how easy it might be. Is it possible that there is a demo app for the OP's use case, as it really is a very common situation, especially for those of us who have to write & port iOS apps for clients who make these requests.... management of separate fragment backstacks within each FragmentActivity.
t
tausiq

This can be easily achieved with ChildFragmentManager

Here is post about this with associated project. take a look,

http://tausiq.wordpress.com/2014/06/06/android-multiple-fragments-stack-in-each-viewpager-tab/


e
e.shishkin

Storing strong references to fragments is not the correct way.

FragmentManager provides putFragment(Bundle, String, Fragment) and saveFragmentInstanceState(Fragment).

Either one is enough to implement a backstack.

Using putFragment, instead of replacing a Fragment, you detach the old one and add the new one. This is what the framework does to a replace transaction that is added to the backstack. putFragment stores an index to the current list of active Fragments and those Fragments are saved by the framework during orientation changes.

The second way, using saveFragmentInstanceState, saves the whole fragment state to a Bundle allowing you to really remove it, rather than detaching. Using this approach makes the back stack easier to manipulate, as you can pop a Fragment whenever you want.

I used the second method for this usecase:

SignInFragment ----> SignUpFragment ---> ChooseBTDeviceFragment
               \                          /
                \------------------------/

I don't want the user to return to the Sign Up screen, from the third one, by pressing the back button. I also do flip animations between them (using onCreateAnimation), so hacky solutions won't work, atleast without the user clearly noticing something is not right.

This is a valid use case for a custom backstack, doing what the user expects...

private static final String STATE_BACKSTACK = "SetupActivity.STATE_BACKSTACK";

private MyBackStack mBackStack;

@Override
protected void onCreate(Bundle state) {
    super.onCreate(state);

    if (state == null) {
        mBackStack = new MyBackStack();

        FragmentManager fm = getSupportFragmentManager();
        FragmentTransaction tr = fm.beginTransaction();
        tr.add(R.id.act_base_frg_container, new SignInFragment());
        tr.commit();
    } else {
        mBackStack = state.getParcelable(STATE_BACKSTACK);
    }
}

@Override
protected void onSaveInstanceState(Bundle outState) {
    super.onSaveInstanceState(outState);
    outState.putParcelable(STATE_BACKSTACK, mBackStack);
}

private void showFragment(Fragment frg, boolean addOldToBackStack) {
    final FragmentManager fm = getSupportFragmentManager();
    final Fragment oldFrg = fm.findFragmentById(R.id.act_base_frg_container);

    FragmentTransaction tr = fm.beginTransaction();
    tr.replace(R.id.act_base_frg_container, frg);
    // This is async, the fragment will only be removed after this returns
    tr.commit();

    if (addOldToBackStack) {
        mBackStack.push(fm, oldFrg);
    }
}

@Override
public void onBackPressed() {
    MyBackStackEntry entry;
    if ((entry = mBackStack.pop()) != null) {
        Fragment frg = entry.recreate(this);

        FragmentManager fm = getSupportFragmentManager();
        FragmentTransaction tr = fm.beginTransaction();
        tr.replace(R.id.act_base_frg_container, frg);
        tr.commit();

        // Pop it now, like the framework implementation.
        fm.executePendingTransactions();
    } else {
        super.onBackPressed();
    }
}

public class MyBackStack implements Parcelable {

    private final List<MyBackStackEntry> mList;

    public MyBackStack() {
        mList = new ArrayList<MyBackStackEntry>(4);
    }

    public void push(FragmentManager fm, Fragment frg) {
        push(MyBackStackEntry.newEntry(fm, frg);
    }

    public void push(MyBackStackEntry entry) {
        if (entry == null) {
            throw new NullPointerException();
        }
        mList.add(entry);
    }

    public MyBackStackEntry pop() {
        int idx = mList.size() - 1;
        return (idx != -1) ? mList.remove(idx) : null;
    }

    @Override
    public int describeContents() {
        return 0;
    }

    @Override
    public void writeToParcel(Parcel dest, int flags) {
        final int len = mList.size();
        dest.writeInt(len);
        for (int i = 0; i < len; i++) {
            // MyBackStackEntry's class is final, theres no
            // need to use writeParcelable
            mList.get(i).writeToParcel(dest, flags);
        }
    }

    protected MyBackStack(Parcel in) {
        int len = in.readInt();
        List<MyBackStackEntry> list = new ArrayList<MyBackStackEntry>(len);
        for (int i = 0; i < len; i++) {
            list.add(MyBackStackEntry.CREATOR.createFromParcel(in));
        }
        mList = list;
    }

    public static final Parcelable.Creator<MyBackStack> CREATOR =
        new Parcelable.Creator<MyBackStack>() {

            @Override
            public MyBackStack createFromParcel(Parcel in) {
                return new MyBackStack(in);
            }

            @Override
            public MyBackStack[] newArray(int size) {
                return new MyBackStack[size];
            }
    };
}

public final class MyBackStackEntry implements Parcelable {

    public final String fname;
    public final Fragment.SavedState state;
    public final Bundle arguments;

    public MyBackStackEntry(String clazz, 
            Fragment.SavedState state,
            Bundle args) {
        this.fname = clazz;
        this.state = state;
        this.arguments = args;
    }

    public static MyBackStackEntry newEntry(FragmentManager fm, Fragment frg) {
        final Fragment.SavedState state = fm.saveFragmentInstanceState(frg);
        final String name = frg.getClass().getName();
        final Bundle args = frg.getArguments();
        return new MyBackStackEntry(name, state, args);
    }

    public Fragment recreate(Context ctx) {
        Fragment frg = Fragment.instantiate(ctx, fname);
        frg.setInitialSavedState(state);
        frg.setArguments(arguments);
        return frg;
    }

    @Override
    public int describeContents() {
        return 0;
    }

    @Override
    public void writeToParcel(Parcel dest, int flags) {
        dest.writeString(fname);
        dest.writeBundle(arguments);

        if (state == null) {
            dest.writeInt(-1);
        } else if (state.getClass() == Fragment.SavedState.class) {
            dest.writeInt(0);
            state.writeToParcel(dest, flags);
        } else {
            dest.writeInt(1);
            dest.writeParcelable(state, flags);
        }
    }

    protected MyBackStackEntry(Parcel in) {
        final ClassLoader loader = getClass().getClassLoader();
        fname = in.readString();
        arguments = in.readBundle(loader);

        switch (in.readInt()) {
            case -1:
                state = null;
                break;
            case 0:
                state = Fragment.SavedState.CREATOR.createFromParcel(in);
                break;
            case 1:
                state = in.readParcelable(loader);
                break;
            default:
                throw new IllegalStateException();
        }
    }

    public static final Parcelable.Creator<MyBackStackEntry> CREATOR =
        new Parcelable.Creator<MyBackStackEntry>() {

            @Override
            public MyBackStackEntry createFromParcel(Parcel in) {
                return new MyBackStackEntry(in);
            }

            @Override
            public MyBackStackEntry[] newArray(int size) {
                return new MyBackStackEntry[size];
            }
    };
}

c
courtf

Disclaimer:

I feel this is the best place to post a related solution I have worked on for a similar type of problem that seems to be pretty standard Android stuff. It's not going to solve the problem for everyone, but it may help some.

If the primary difference between your fragments is only the data backing them up (ie, not a lot of big layout differences), then you may not need to actually replace the fragment, but merely swap out the underlying data and refresh the view.

Here's a description of one possible example for this approach:

I have an app that uses ListViews. Each item in the list is a parent with some number of children. When you tap the item, a new list needs to open with those children, within the same ActionBar tab as the original list. These nested lists have a very similar layout (some conditional tweaks here and there perhaps), but the data is different.

This app has several layers of offspring beneath the initial parent list and we may or may not have data from the server by the time a user attempts to access any certain depth beyond the first. Because the list is constructed from a database cursor, and the fragments use a cursor loader and cursor adapter to populate the list view with list items, all that needs to happen when a click is registered is:

1) Create a new adapter with the appropriate 'to' and 'from' fields that will match new item views being added to the list and the columns returned by the new cursor.

2) Set this adapter as the new adapter for the ListView.

3) Build a new URI based on the item that was clicked and restart the cursor loader with the new URI (and projection). In this example, the URI is mapped to specific queries with the selection args passed down from the UI.

4) When the new data has been loaded from the URI, swap the cursor associated with the adapter to the new cursor, and the list will then refresh.

There is no backstack associated with this since we aren't using transactions, so you will have to either build your own, or play the queries in reverse when backing out of the hierarchy. When I tried this, the queries were fast enough that I just perform them again in oNBackPressed() up until I am at the top of hierarchy, at which point the framework takes over the back button again.

If you find yourself in a similar situation, make sure to read the docs: http://developer.android.com/guide/topics/ui/layout/listview.html

http://developer.android.com/reference/android/support/v4/app/LoaderManager.LoaderCallbacks.html

I hope this helps someone!


In case anyone is doing this, and also using a SectionIndexer (such as AlphabetIndexer), you may notice that after replacing the adapter, your fast scrolling doesn't work. Kind of an unfortunate bug, but replacing the adapter, even with a brand new indexer, doesn't update the list of sections used by FastScroll. There is a workaround, please see: description of problem and workaround
S
Sebastian Baltes

I had exactly the same problem and implemented an open source github project that covers stacked tab, back and up navigation and is well tested and documented:

https://github.com/SebastianBaltesObjectCode/PersistentFragmentTabs

This is a simple and small framework for navigation tabs and fragment switching and handling of up and back navigation. Each tab has its own stack of fragments. It uses ActionBarSherlock and is compatible back to API level 8.


A
Arnaud SmartFun

This is a complex problem as Android only handles 1 back stack, but this is feasible. It took me days to create a library called Tab Stacker that does exactly what you are looking for: a fragment history for each tab. It is open source and fully documented, and can be included easily with gradle. You can find the library on github: https://github.com/smart-fun/TabStacker

You can also download the sample app to see that the behaviour corresponds to your needs:

https://play.google.com/apps/testing/fr.arnaudguyon.tabstackerapp

If you have any question don't hesitate to drop a mail.


A
Ali Khaki

I'd like to suggest my own solution in case somebody is looking and want to try and choose the best one for his/her needs.

https://github.com/drusak/tabactivity

The purpose of creating the library is quite banal - implement it like iPhone.

The main advantages:

use android.support.design library with TabLayout;

each tab has its own stack using FragmentManager (without saving fragments' references);

support for deep linking (when you need to open specific tab and specific fragment's level in it);

saving / restoring states of tabs;

adaptive lifecycle methods of fragments in tabs;

quite easy to implement for your needs.


Thank you, this has been quite helpful. I need to use ListFragments in addition to Fragments so I duplicated BaseTabFragment.java to BaseTabListFragment.java and had it extend ListFragment. Then I had to change various parts in the code where it always assumed to expect a BaseTabFragment. Is there a better way?
Unfortunately, Didn't think about ListFragment. Technically it is right solution, but it will require addition checks for TabFragment and its instanceOf BaseTabListFragment. Another approach to use Fragment with ListView inside (exactly the same as ListFragment implemeted). I'll think over it. Thanks for pointing Me on that!
M
Morten Holmgaard

A simple solution:

Every time you change tab/root view call:

fragmentManager.popBackStack(null, FragmentManager.POP_BACK_STACK_INCLUSIVE);

It will clear the BackStack. Remember to call this before you change the root fragment.

And add fragments with this:

FragmentTransaction transaction = getFragmentManager().beginTransaction();
NewsDetailsFragment newsDetailsFragment = NewsDetailsFragment.newInstance(newsId);
transaction.add(R.id.content_frame, newsDetailsFragment).addToBackStack(null).commit();

Note the .addToBackStack(null) and the transaction.add could e.g. be changed with transaction.replace.


S
Sulfkain

This thread was very very interesting and useful. Thanks Krishnabhadra for your explanation and code, I use your code and improved a bit, allowing to persist the stacks, currentTab, etc... from change configuration (rotating mainly). Tested on a real 4.0.4 and 2.3.6 devices, not tested on emulator

I change this part of code on "AppMainTabActivity.java", the rest stay the same. Maybe Krishnabhadra will add this on his code.

Recover data onCreate:

protected void onCreate(Bundle savedInstanceState) {
    super.onCreate(savedInstanceState);
    setContentView(R.layout.app_main_tab_fragment_layout);

    /*  
     *  Navigation stacks for each tab gets created..
     *  tab identifier is used as key to get respective stack for each tab
     */

  //if we are recreating this activity...
    if (savedInstanceState!=null) {
         mStacks = (HashMap<String, Stack<Fragment>>) savedInstanceState.get("stack");
         mCurrentTab = savedInstanceState.getString("currentTab");
    }
    else {
    mStacks = new HashMap<String, Stack<Fragment>>();
    mStacks.put(AppConstants.TAB_A, new Stack<Fragment>());
    mStacks.put(AppConstants.TAB_B, new Stack<Fragment>());

    }

    mTabHost = (TabHost)findViewById(android.R.id.tabhost);
    mTabHost.setup();

    initializeTabs();

  //set the listener the last, to avoid overwrite mCurrentTab everytime we add a new Tab
    mTabHost.setOnTabChangedListener(listener);
}

Save the variables and put to Bundle:

 //Save variables while recreating
@Override
public void onSaveInstanceState(Bundle outState) {
    super.onSaveInstanceState(outState);
    outState.putSerializable("stack", mStacks);
    outState.putString("currentTab", mCurrentTab);
    //outState.putInt("tabHost",mTabHost);
}

If exist a previous CurrentTab, set this, else create a new Tab_A:

public void initializeTabs(){
    /* Setup your tab icons and content views.. Nothing special in this..*/
    TabHost.TabSpec spec    =   mTabHost.newTabSpec(AppConstants.TAB_A);

    spec.setContent(new TabHost.TabContentFactory() {
        public View createTabContent(String tag) {
            return findViewById(R.id.realtabcontent);
        }
    });
    spec.setIndicator(createTabView(R.drawable.tab_a_state_btn));
    mTabHost.addTab(spec);


    spec                    =   mTabHost.newTabSpec(AppConstants.TAB_B);
    spec.setContent(new TabHost.TabContentFactory() {
        public View createTabContent(String tag) {
            return findViewById(R.id.realtabcontent);
        }
    });
    spec.setIndicator(createTabView(R.drawable.tab_b_state_btn));
    mTabHost.addTab(spec);

//if we have non default Tab as current, change it
    if (mCurrentTab!=null) {
        mTabHost.setCurrentTabByTag(mCurrentTab);
    } else {
        mCurrentTab=AppConstants.TAB_A;
        pushFragments(AppConstants.TAB_A, new AppTabAFirstFragment(), false,true);
    }
}

I hope this helps other people.


This is wrong. When onCreate is called with a Bundle those Fragments won't be the same ones that are gonna be shown on screen and you're leaking the old ones, unless you're using setRetainInstance. And if the ActivityManager "saves" your Activity, since a Fragment is not Serializable nor Parcelable, when the user returns to your Activity, it will crash.
O
Oleksandr B

I would recommend do not use backstack based on HashMap> there is lots of bugs in "do not keep activities" mode. It will not correctly restore the state in case you deeply in fragment's stack. And also will be crached in nested map fragment (with exeption: Fragment no view found for ID) . Coz HashMap> after background\foreground app will be null

I optimize code above for work with fragment's backstack

It is bottom TabView

Main activity Class

import android.app.Activity;
import android.app.Fragment;
import android.app.FragmentManager;
import android.app.FragmentTransaction;
import android.content.Intent;
import android.os.Bundle;
import android.view.LayoutInflater;
import android.view.View;
import android.view.Window;
import android.widget.ImageView;
import android.widget.TabHost;
import android.widget.TextView;

import com.strikersoft.nida.R;
import com.strikersoft.nida.abstractActivity.BaseActivity;
import com.strikersoft.nida.screens.tags.mapTab.MapContainerFragment;
import com.strikersoft.nida.screens.tags.searchTab.SearchFragment;
import com.strikersoft.nida.screens.tags.settingsTab.SettingsFragment;

public class TagsActivity extends BaseActivity {
    public static final String M_CURRENT_TAB = "M_CURRENT_TAB";
    private TabHost mTabHost;
    private String mCurrentTab;

    public static final String TAB_TAGS = "TAB_TAGS";
    public static final String TAB_MAP = "TAB_MAP";
    public static final String TAB_SETTINGS = "TAB_SETTINGS";

    protected void onCreate(Bundle savedInstanceState) {
        super.onCreate(savedInstanceState);
        getWindow().requestFeature(Window.FEATURE_ACTION_BAR);
        getActionBar().hide();
        setContentView(R.layout.tags_activity);

        mTabHost = (TabHost) findViewById(android.R.id.tabhost);

        mTabHost.setup();

        if (savedInstanceState != null) {
            mCurrentTab = savedInstanceState.getString(M_CURRENT_TAB);
            initializeTabs();
            mTabHost.setCurrentTabByTag(mCurrentTab);
            /*
            when resume state it's important to set listener after initializeTabs
            */
            mTabHost.setOnTabChangedListener(listener);
        } else {
            mTabHost.setOnTabChangedListener(listener);
            initializeTabs();
        }
    }

    private View createTabView(final int id, final String text) {
        View view = LayoutInflater.from(this).inflate(R.layout.tabs_icon, null);
        ImageView imageView = (ImageView) view.findViewById(R.id.tab_icon);
        imageView.setImageDrawable(getResources().getDrawable(id));
        TextView textView = (TextView) view.findViewById(R.id.tab_text);
        textView.setText(text);
        return view;
    }

    /*
    create 3 tabs with name and image
    and add it to TabHost
     */
    public void initializeTabs() {

        TabHost.TabSpec spec;

        spec = mTabHost.newTabSpec(TAB_TAGS);
        spec.setContent(new TabHost.TabContentFactory() {
            public View createTabContent(String tag) {
                return findViewById(R.id.realtabcontent);
            }
        });
        spec.setIndicator(createTabView(R.drawable.tab_tag_drawable, getString(R.string.tab_tags)));
        mTabHost.addTab(spec);

        spec = mTabHost.newTabSpec(TAB_MAP);
        spec.setContent(new TabHost.TabContentFactory() {
            public View createTabContent(String tag) {
                return findViewById(R.id.realtabcontent);
            }
        });
        spec.setIndicator(createTabView(R.drawable.tab_map_drawable, getString(R.string.tab_map)));
        mTabHost.addTab(spec);


        spec = mTabHost.newTabSpec(TAB_SETTINGS);
        spec.setContent(new TabHost.TabContentFactory() {
            public View createTabContent(String tag) {
                return findViewById(R.id.realtabcontent);
            }
        });
        spec.setIndicator(createTabView(R.drawable.tab_settings_drawable, getString(R.string.tab_settings)));
        mTabHost.addTab(spec);

    }

    /*
    first time listener will be trigered immediatelly after first: mTabHost.addTab(spec);
    for set correct Tab in setmTabHost.setCurrentTabByTag ignore first call of listener
    */
    TabHost.OnTabChangeListener listener = new TabHost.OnTabChangeListener() {
        public void onTabChanged(String tabId) {

            mCurrentTab = tabId;

            if (tabId.equals(TAB_TAGS)) {
                pushFragments(SearchFragment.getInstance(), false,
                        false, null);
            } else if (tabId.equals(TAB_MAP)) {
                pushFragments(MapContainerFragment.getInstance(), false,
                        false, null);
            } else if (tabId.equals(TAB_SETTINGS)) {
                pushFragments(SettingsFragment.getInstance(), false,
                        false, null);
            }

        }
    };

/*
Example of starting nested fragment from another fragment:

Fragment newFragment = ManagerTagFragment.newInstance(tag.getMac());
                TagsActivity tAct = (TagsActivity)getActivity();
                tAct.pushFragments(newFragment, true, true, null);
 */
    public void pushFragments(Fragment fragment,
                              boolean shouldAnimate, boolean shouldAdd, String tag) {
        FragmentManager manager = getFragmentManager();
        FragmentTransaction ft = manager.beginTransaction();
        if (shouldAnimate) {
            ft.setCustomAnimations(R.animator.fragment_slide_left_enter,
                    R.animator.fragment_slide_left_exit,
                    R.animator.fragment_slide_right_enter,
                    R.animator.fragment_slide_right_exit);
        }
        ft.replace(R.id.realtabcontent, fragment, tag);

        if (shouldAdd) {
            /*
            here you can create named backstack for realize another logic.
            ft.addToBackStack("name of your backstack");
             */
            ft.addToBackStack(null);
        } else {
            /*
            and remove named backstack:
            manager.popBackStack("name of your backstack", FragmentManager.POP_BACK_STACK_INCLUSIVE);
            or remove whole:
            manager.popBackStack(null, FragmentManager.POP_BACK_STACK_INCLUSIVE);
             */
            manager.popBackStack(null, FragmentManager.POP_BACK_STACK_INCLUSIVE);
        }
        ft.commit();
    }

    /*
    If you want to start this activity from another
     */
    public static void startUrself(Activity context) {
        Intent newActivity = new Intent(context, TagsActivity.class);
        newActivity.addFlags(Intent.FLAG_ACTIVITY_NEW_TASK);
        context.startActivity(newActivity);
        context.finish();
    }

    @Override
    public void onSaveInstanceState(Bundle outState) {
        outState.putString(M_CURRENT_TAB, mCurrentTab);
        super.onSaveInstanceState(outState);
    }

    @Override
    public void onBackPressed(){
        super.onBackPressed();
    }
}

tags_activity.xml

<

?xml version="1.0" encoding="utf-8"?>
<TabHost
    xmlns:android="http://schemas.android.com/apk/res/android"
    android:id="@android:id/tabhost"
    android:layout_width="match_parent"
    android:layout_height="match_parent">

    <LinearLayout
        android:orientation="vertical"
        android:layout_width="match_parent"
        android:layout_height="match_parent">

        <FrameLayout
            android:id="@android:id/tabcontent"
            android:layout_width="0dp"
            android:layout_height="0dp"
            android:layout_weight="0"/>
        <FrameLayout
            android:id="@+android:id/realtabcontent"
            android:background="@drawable/bg_main_app_gradient"
            android:layout_width="match_parent"
            android:layout_height="0dp"
            android:layout_weight="1"/>
        <TabWidget
            android:id="@android:id/tabs"
            android:background="#EAE7E1"
            android:orientation="horizontal"
            android:layout_width="match_parent"
            android:layout_height="wrap_content"
            android:layout_weight="0"/>
    </LinearLayout>
</TabHost>

tags_icon.xml

<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
    xmlns:tools="http://schemas.android.com/tools"
    android:id="@+id/tabsLayout"
    android:layout_width="fill_parent"
    android:layout_height="fill_parent"
    android:background="@drawable/bg_tab_gradient"
    android:gravity="center"
    android:orientation="vertical"
    tools:ignore="contentDescription" >

    <ImageView
        android:id="@+id/tab_icon"
        android:layout_marginTop="4dp"
        android:layout_width="wrap_content"
        android:layout_height="wrap_content" />
    <TextView 
        android:id="@+id/tab_text"
        android:layout_marginBottom="3dp"
        android:layout_width="wrap_content"
        android:layout_height="wrap_content"
        android:textColor="@color/tab_text_color"/>

</LinearLayout>

https://i.stack.imgur.com/B4UBg.png