How do I pass variables and data from PHP to JavaScript?

There are actually several approaches to do this. Some require more overhead than others, and some are considered better than others.

In no particular order:

Use AJAX to get the data you need from the server. Echo the data into the page somewhere, and use JavaScript to get the information from the DOM. Echo the data directly to JavaScript.

In this post, we'll examine each of the above methods, and see the pros and cons of each, as well as how to implement them.

1. Use AJAX to get the data you need from the server

This method is considered the best, because your server side and client side scripts are completely separate.

Pros

Better separation between layers - If tomorrow you stop using PHP, and want to move to a servlet, a REST API, or some other service, you don't have to change much of the JavaScript code.

More readable - JavaScript is JavaScript, PHP is PHP. Without mixing the two, you get more readable code on both languages.

Allows for asynchronous data transfer - Getting the information from PHP might be time/resources expensive. Sometimes you just don't want to wait for the information, load the page, and have the information reach whenever.

Data is not directly found on the markup - This means that your markup is kept clean of any additional data, and only JavaScript sees it.

Cons

Latency - AJAX creates an HTTP request, and HTTP requests are carried over network and have network latencies.

State - Data fetched via a separate HTTP request won't include any information from the HTTP request that fetched the HTML document. You may need this information (e.g., if the HTML document is generated in response to a form submission) and, if you do, will have to transfer it across somehow. If you have ruled out embedding the data in the page (which you have if you are using this technique) then that limits you to cookies/sessions which may be subject to race conditions.

Implementation Example

With AJAX, you need two pages, one is where PHP generates the output, and the second is where JavaScript gets that output:

get-data.php

/* Do some operation here, like talk to the database, the file-session
 * The world beyond, limbo, the city of shimmers, and Canada.
 *
 * AJAX generally uses strings, but you can output JSON, HTML and XML as well.
 * It all depends on the Content-type header that you send with your AJAX
 * request. */

echo json_encode(42); // In the end, you need to echo the result.
                      // All data should be json_encode()d.

                      // You can json_encode() any value in PHP, arrays, strings,
                      //even objects.

index.php (or whatever the actual page is named like)

<!-- snip -->
<script>
    function reqListener () {
      console.log(this.responseText);
    }

    var oReq = new XMLHttpRequest(); // New request object
    oReq.onload = function() {
        // This is where you handle what to do with the response.
        // The actual data is found on this.responseText
        alert(this.responseText); // Will alert: 42
    };
    oReq.open("get", "get-data.php", true);
    //                               ^ Don't block the rest of the execution.
    //                                 Don't wait until the request finishes to
    //                                 continue.
    oReq.send();
</script>
<!-- snip -->

The above combination of the two files will alert 42 when the file finishes loading.

Some more reading material

Using XMLHttpRequest - MDN

XMLHttpRequest object reference - MDN

How do I return the response from an asynchronous call?

2. Echo the data into the page somewhere, and use JavaScript to get the information from the DOM

This method is less preferable to AJAX, but it still has its advantages. It's still relatively separated between PHP and JavaScript in a sense that there is no PHP directly in the JavaScript.

Pros

Fast - DOM operations are often quick, and you can store and access a lot of data relatively quickly.

Cons

Potentially Unsemantic Markup - Usually, what happens is that you use some sort of to store the information, because it's easier to get the information out of inputNode.value, but doing so means that you have a meaningless element in your HTML. HTML has the element for data about the document, and HTML 5 introduces data-* attributes for data specifically for reading with JavaScript that can be associated with particular elements.

Dirties up the Source - Data that PHP generates is outputted directly to the HTML source, meaning that you get a bigger and less focused HTML source.

Harder to get structured data - Structured data will have to be valid HTML, otherwise you'll have to escape and convert strings yourself.

Tightly couples PHP to your data logic - Because PHP is used in presentation, you can't separate the two cleanly.

Implementation Example

With this, the idea is to create some sort of element which will not be displayed to the user, but is visible to JavaScript.

index.php

<!-- snip -->
<div id="dom-target" style="display: none;">
    <?php
        $output = "42"; // Again, do some operation, get the output.
        echo htmlspecialchars($output); /* You have to escape because the result
                                           will not be valid HTML otherwise. */
    ?>
</div>
<script>
    var div = document.getElementById("dom-target");
    var myData = div.textContent;
</script>
<!-- snip -->

3. Echo the data directly to JavaScript

This is probably the easiest to understand.

Pros

Very easily implemented - It takes very little to implement this, and understand.

Does not dirty source - Variables are outputted directly to JavaScript, so the DOM is not affected.

Cons

Tightly couples PHP to your data logic - Because PHP is used in presentation, you can't separate the two cleanly.

Implementation Example

Implementation is relatively straightforward:

<!-- snip -->
<script>
    var data = <?php echo json_encode("42", JSON_HEX_TAG); ?>; // Don't forget the extra semicolon!
</script>
<!-- snip -->

Good luck!

---

I usually use data-* attributes in HTML.

<div
    class="service-container"
    data-service="<?= htmlspecialchars($myService->getValue()) ?>"
>

</div>

<script>
    $(document).ready(function() {
        $('.service-container').each(function() {
            var container = $(this);
            var service = container.data('service');

            // Var "service" now contains the value of $myService->getValue();
        });
    });
</script>

This example uses jQuery, but it can be adapted for another library or vanilla JavaScript.

You can read more about the dataset property here: https://developer.mozilla.org/en-US/docs/Web/API/HTMLElement.dataset

---

I'm going to try a simpler answer:

Explanation of the problem

First, let's understand the flow of events when a page is served from our server:

First PHP is run, it generates the HTML that is served to the client.

Then, the HTML is delivered to the client, after PHP is done with it, I'd like to emphasize that once the code leaves the server - PHP is done with it and can no longer access it.

Then, the HTML with JavaScript reaches the client, which can execute JavaScript on that HTML.

So really, the core thing to remember here is that HTTP is stateless. Once a request left the server, the server can not touch it. So, that leaves our options to:

Send more requests from the client after the initial request is done. Encode what the server had to say in the initial request.

Solutions

That's the core question you should be asking yourself is:

Am I writing a website or an application?

Websites are mainly page based, and the page load times needs to be as fast as possible (for example - Wikipedia). Web applications are more AJAX heavy and perform a lot of round trips to get the client fast information (for example - a stock dashboard).

Website

Sending more requests from the client after the initial request is done is slow as it requires more HTTP requests which have significant overhead. Moreover, it requires asynchronousity as making an AJAX request requires a handler for when it's complete.

I would not recommend making another request unless your site is an application for getting that information from the server.

You want fast response times which have a huge impact on conversion and load times. Making Ajax requests is slow for the initial uptime in this case and unneeded.

You have two ways to tackle the issue

Set a cookie - cookies are headers sent in HTTP requests that both the server and client can read.

Encode the variable as JSON - JSON looks very close to JavaScript objects and most JSON objects are valid JavaScript variables.

Setting a cookie is really not very difficult, you just assign it a value:

setcookie("MyCookie", $value); // Sets the cookie to the value, remember, do not
                               // Set it with HTTP only to true.

Then, you can read it with JavaScript using document.cookie:

Here is a short hand rolled parser, but the answer I linked to right above this has better tested ones:

var cookies = document.cookie.split(";").
    map(function(el){ return el.split("="); }).
    reduce(function(prev,cur){ prev[cur[0]] = cur[1]; return prev },{});
alert(cookies["MyCookie"]); // Value set with PHP.

Cookies are good for a little data. This is what tracking services often do.

Once we have more data, we can encode it with JSON inside a JavaScript variable instead:

<script>
    var myServerData = <?=json_encode($value)?>; // Don't forget to sanitize
                                                 //server data
</script>

Assuming $value is json_encodeable on the PHP side (it usually is). This technique is what Stack Overflow does with its chat for example (only using .NET instead of PHP).

Application

If you're writing an application - suddenly the initial load time isn't always as important as the ongoing performance of the application, and it starts to pay off to load data and code separately.

My answer here explains how to load data using AJAX in JavaScript:

function callback(data){
    // What do I do with the response?
}

var httpRequest = new XMLHttpRequest;
httpRequest.onreadystatechange = function(){
    if (httpRequest.readyState === 4) { // Request is done
        if (httpRequest.status === 200) { // successfully
            callback(httpRequest.responseText); // We're calling our method
        }
    }
};
httpRequest.open('GET', "/echo/json");
httpRequest.send();

Or with jQuery:

$.get("/your/url").done(function(data){
    // What do I do with the data?
});

Now, the server just needs to contain a /your/url route/file that contains code that grabs the data and does something with it, in your case:

<?php
$val = myService->getValue(); // Makes an API and database call
header("Content-Type: application/json"); // Advise client of response type
echo json_encode($val); // Write it to the output

This way, our JavaScript file asks for the data and shows it rather than asking for code or for layout. This is cleaner and starts to pay off as the application gets higher. It's also better separation of concerns and it allows testing the client side code without any server side technology involved which is another plus.

Postscript: You have to be very aware of XSS attack vectors when you inject anything from PHP to JavaScript. It's very hard to escape values properly and it's context sensitive. If you're unsure how to deal with XSS, or unaware of it - please read this OWASP article, this one and this question.

---

<script>
  var jsvar = <?php echo json_encode($PHPVar); ?>;
</script>

json_encode() requires:

PHP 5.2.0 or more

$PHPVar encoded as UTF-8, Unicode.

---

Simply use one of the following methods.

<script type="text/javascript">
var js_variable  = '<?php echo $php_variable;?>';
<script>

OR

<script type="text/javascript">
    var js_variable = <?php echo json_encode($php_variable); ?>; 
</script>

---

I quite like the way the WordPress works with its enqueue and localize functions, so following that model, I wrote a simple class for putting a scripts into page according to the script dependencies, and for making additional data available for the script.

class mHeader {

    private $scripts = array();

    /**
     * @param string $id        Unique script identifier
     * @param string $src      Script src attribute
     * @param array  $deps       An array of dependencies ( script identifiers ).
     * @param array  $data       An array, data that will be json_encoded and available to the script.
     */
    function enqueue_script($id, $src, $deps = array(), $data = array()) {
        $this->scripts[$id] = array('src' => $src, 'deps' => $deps, 'data' => $data);
    }

    private function dependencies($script) {
        if ($script['deps']) {
            return array_map(array($this, 'dependencies'), array_intersect_key($this->scripts, array_flip($script['deps'])));
        }
    }

    private function _unset($key, &$deps, &$out) {
        $out[$key] = $this->scripts[$key];
        unset($deps[$key]);
    }

    private function flattern(&$deps, &$out = array()) {

        foreach($deps as $key => $value) {
            empty($value) ? $this->_unset($key, $deps, $out) : $this->flattern( $deps[$key], $out);
        }
    }

    function print_scripts() {

        if (!$this->scripts)
            return;

        $deps = array_map(array($this, 'dependencies'), $this->scripts);
        while ($deps)
            $this->flattern($deps, $js);

        foreach($js as $key => $script) {
            $script['data'] && printf("<script> var %s = %s; </script>" . PHP_EOL, key($script['data']), json_encode(current( $script['data'])));
            echo "<script id=\"$key-js\" src=\"$script[src]\" type=\"text/javascript\"></script>" . PHP_EOL;
        }
    }
}

The call to the enqueue_script() function is for adding script, setting the source and dependencies on other scripts, and additional data needed for the script.

$header = new mHeader();

$header->enqueue_script('jquery-ui', '//ajax.googleapis.com/ajax/libs/jqueryui/1.10.4/jquery-ui.min.js', array('jquery'));
$header->enqueue_script('jquery', '//ajax.googleapis.com/ajax/libs/jquery/1.11.1/jquery.min.js');
$header->enqueue_script('custom-script', '//custom-script.min.js', array('jquery-ui'), array('mydata' => array('value' => 20)));

$header->print_scripts();

And, print_scripts() method of the above example will send this output:

<script id="jquery-js" src="//ajax.googleapis.com/ajax/libs/jquery/1.11.1/jquery.min.js" type="text/javascript"></script>
<script id="jquery-ui-js" src="//ajax.googleapis.com/ajax/libs/jqueryui/1.10.4/jquery-ui.min.js" type="text/javascript"></script>
<script> var mydata = {"value":20}; </script>
<script id="custom-script-js" src="//custom-script.min.js" type="text/javascript"></script>

Regardless the fact that the script 'jquery' is enqueued after the 'jquery-ui', it is printed before because it is defined in 'jquery-ui' that it depends on 'jquery'. Additional data for the 'custom-script' are inside a new script block and are placed in front of it, it contains mydata object that holds additional data, now available to 'custom-script'.

---

Try this:

<?php
    echo "<script> var x = " . json_encode($phpVariable) . "</script>";
?>

--

-After trying this for a while

Although it works, however it slows down the performance. As PHP is a server-side script while JavaScript is a user side.

---