Impossible to Install PG gem on my mac with Mavericks

If you want to avoid using MacPorts, you can download the Postgres App and place it into the Application directory.

Then, specify the location of newly downloaded pg_config:

gem install pg -- --with-pg-config=/Applications/Postgres.app/Contents/Versions/latest/bin/pg_config

If you run in to missing headers problem, try specifying the include directory of the app:

gem install pg -- --with-pg-include='/Applications/Postgres.app/Contents/Versions/latest/include/'

---

Use brew to get postgresql

brew install postgresql

Check you have pg_config in the installed brew. I found mine in

/usr/local/Cellar/postgresql/9.3.3/bin/pg_config

Check via :

$ ls /usr/local/Cellar/postgresql/9.3.3/bin/pg_config
> /usr/local/Cellar/postgresql/9.3.3/bin/pg_config

Once done, install the pg gem with

env ARCHFLAGS="-arch x86_64" gem install pg -- --with-pg-config=/usr/local/Cellar/postgresql/9.3.3/bin/pg_config

---

I wasn't able to install postgres via MacPorts. Instead, I installed Postgress.app. and called

gem install pg -- --with-pg-config=/Applications/Postgres.app/Contents/MacOS/bin/pg_config

Note: in newer versions (in 9.3 at least) the path is actually: /Applications/Postgres.app/Contents/Versions/9.3/bin/pg_config

---

If you have homebrew, just type:

$ brew install postgresql

---

For me, on Yosemite, I didn't need to specify pg_config path. The following got it done.

brew install postgresql
sudo env ARCHFLAGS="-arch x86_64" gem install pg

Seems like architecture flag is the key.

---

Here's another alternative in case you want to use the postgresql installer directly. There's a couple of hoops you gotta jump through to begin with after updating to mavericks. Here's what I did:

Install the xcode command line tools first:

xcode-select --install

Download and install the latest version of PostgreSQL (9.3.1), in my case I just used the graphical installer. Here's the link to the downloads page:

http://www.enterprisedb.com/products-services-training/pgdownload#osx

Just choose all of the defaults it gives you. It my case it installed postgres to the following directory, if you installed it to a different directory, just remember the path you chose, because you'll need it shortly.

/Library/PostgreSQL/9.3

If you now try and install the latest pg gem (0.17.0) you'll need to pass a couple of options on the command line. This is what I used:

ARCHFLAGS="-arch x86_64" gem install pg -- --with-pg-config=/Library/PostgreSQL/9.3/bin/pg_config

If you installed postgres to a different location then you'll need to fix up the path to the pg_config file.

If it complains of a missing 'libpq.5.dylib' file while trying install the pg gem you'll need to create a symlink pointing to the actual location of this file. Postgres is looking for it in your /usr/local/lib/ directory so create a symlink in there and redirect it to its actual location. In my case I had to run:

sudo ln -s /Library/PostgreSQL/9.3/lib/libpq.5.dylib /usr/local/lib/libpq.5.dylib

Once you've done that, retry installing the gem again and hopefully it will work for you the same way it did for me.

---

In my case (i needed PG 0.16.0 on Mavericks), i installed postgresql via MacPorts

sudo port install postgresql90

and then

gem install pg -v '0.16.0' -- --with-pg-config=/opt/local/lib/postgresql90/bin/pg_config

For the latest version you need to deduct -v '0.16.0'

gem install pg -- --with-pg-config=/opt/local/lib/postgresql90/bin/pg_config

If you have Homebrew installed do not install MacPorts before you read about their coexistense

---

Place the missing --with-pg-config in Bundler's config file: /Users/<your_user>/.bundle/config to make your life easier.

---
BUNDLE_BUILD__PG: --with-pg-config=/Applications/Postgres93.app/Contents/MacOS/bin/pg_config
BUNDLE_BUILD__EXAMPLE_GEM: --other-configs
BUNDLE_BUILD__OTHER_EXAMPLE_GEM: --other-configs

Then run bundle install again.

---

That works for me! (Postgres 93, mac ox 10.9.1)1. download @ http://postgresapp.com/ and than

gem install pg -- --with-pg-config=/Applications/Postgres93.app/Contents/MacOS/bin/pg_config

---

I was stuck on my bundle install for 3 days. Tried Everything like adding env ARCHFLAGS="-arch x86_64" gem install pg -- --with-pg-config=/usr/local/Cellar/postgresql/9.3.5_1/bin/pg_config

I was able to see pg gem getting installed after this command but still it was not installing from bundle install, which was a pain because I dint know what to write in Gemfile except gem 'pg'

The thing which finally worked for me was to find that my pg_config was in /Library/PostgreSQL/9.3/bin/pg_config and by default the Gemfile bundle install looks in /usr/local/bin/pg_config

I just ran the following command and magic happened. bundle config build.pg --with-pg-config=/Library/PostgreSQL/9.3/bin/pg_config

---

In my case it didn't work if you don't specify the arch flags, OS X 10.10.3 and postersApp 9.4

sudo env ARCHFLAGS="-arch x86_64" gem install pg -- \--with-pg-config=/Applications/Postgres.app/Contents/Versions/9.4/bin/pg_config

---

The easiest way for me to resolve this was to use Postgres.app and set up my env vars so gem install pg just works (instead of requiring the --with-pg-config flag).

Using Homebrew Cask,

brew cask install postgres
echo 'export PG_HOME=/Applications/Postgres.app/Contents/Versions/latest' >> ~/.bash_profile
echo 'export PATH="$PATH:$PG_HOME/bin"' >> ~/.bash_profile
source ~/.bash_profile

# now it just works
gem install pg

---

This is what it worked for me:

gem install pg -- --with-pg-config=/Library/PostgreSQL/9.3/bin/pg_config

---

In my case, I uninstalled the version installed via homebrew and switched to Postgres.app (v9.3.4.2 at the time of writing).

It only seemed to work when prepending the environment architecture flags and specifying the path to pg_config. Your milage might vary, so this answer could help with variations on pg_config's location.

Here is the final, complete command that worked for me:

env ARCHFLAGS="-arch x86_64" gem install pg -- \
--with-pg-config=/Applications/Postgres.app/Contents/Versions/9.3/bin/pg_config 

---

sudo ARCHFLAGS="-arch x86_64" gem install pg -- --with-pg-config=/usr/local/bin/pg_config

---

I had installed postgres using homebrew on mac. Used below command to find the location

which postgres
/usr/local/opt/postgresql@12/bin/postgres

Installed gem using below command. In the above path just replace the postgres with pg_config since command requires path for pg_config.

gem install pg -- --with-pg-config=/usr/local/opt/postgresql@12/bin/pg_config

---

I was getting the same error when running bundle install regarding the pg gem (using Mac OS X Mavericks). After hours of researching, I found the solution. I installed postgres using homebrew

brew install postgres

After installing that, I created a new rails app using postgres. I ran

bundle install

to no avail (got same error as the question). I used

which psql

to figure out where my postgres was installed, it returned

/usr/local/bin/psql

before running bundle install again, I had to change the global path to build.pg by running the following

bundle config build.pg --with-pg-config=/usr/local/bin/pg_config

then I ran bundle install again and voila! I used the postgres where brew installed it.

---

On OS X Mavericks with latest Postgres App do the following with sudo privileges

env ARCHFLAGS="-arch x86_64" gem install pg -v '0.17.1' -- --with-pg-config=/Applications/Postgres.app/Contents/MacOS/bin/pg_config

---

What worked for me on 10.9.3 with Xcode 5.1.1 was the following:

brew update
brew install postgresql 
gem install pg -v '0.17.1'

I needed pg 0.17.1

---

For me, the error message looked like this:

Installing pg 0.18.4 with native extensions

Gem::Ext::BuildError: ERROR: Failed to build gem native extension.

...

checking for pg_config... no

No pg_config... trying anyway. If building fails, please try again with --with-pg-config=/path/to/pg_config

As the error message shows, it's trying to execute the command/script "pg_config". So just add it to the path from wherever your Postgres installation is. In my case, I did:

export PATH=/Applications/Postgres.app/Contents/Versions/9.5/bin:$PATH

then

bundle

That's it.

---

For any lost soul outthere still having this issue with no resolution and have a brew installed ruby and postgres. Here's the following steps to make sure of:

Make sure your version of ruby wasn't installed with the --universal flag. This was the hardest thing to figure out, I had --universal which was the final root of the problem.

This was the hardest thing to figure out, I had --universal which was the final root of the problem.

Make sure you have initialized postgresql properly with initdb and createdb commands (look elsewhere for steps to do this).

Make sure Xcode (Optional) and command line tools is installed; on the terminal: xcode-select --install sudo xcodebuild -license (if Xcode installed) or open the application and accept the license agreement. Reboot Computer

xcode-select --install

sudo xcodebuild -license (if Xcode installed) or open the application and accept the license agreement.

Reboot Computer

which ruby, which gem and which postgres should show /usr/local/bin/ruby, /usr/local/bin/gem and /usr/local/bin/postgres respectfully.

On the terminal run: gem install pg -- --with-pg-config=/usr/local/bin/pg_config or env ARCHFLAGS="-arch x86_64" gem install pg -- --with-pg-config=/usr/local/bin/pg_config

gem install pg -- --with-pg-config=/usr/local/bin/pg_config

or

env ARCHFLAGS="-arch x86_64" gem install pg -- --with-pg-config=/usr/local/bin/pg_config

Making sure all these steps are satisfied I was able to solve the following errors: ruby.h header error developer tools installed first error

ruby.h header error

developer tools installed first error

---

First of all find pg_config location

sudo find / -name "pg_config" -print

The answer is /Library/PostgreSQL/9.1/bin/pg_config in my configuration (MAC Maverick)

Then try installing something like below

gem install pg -- --with-pg-config=/Library/PostgreSQL/9.3/bin/pg_config

if this does not work then try to check in what way you installed postgresql

brew/mac port/setup

then you have to try relevant option to the same.

Thank you.

Ram

---

I was with the same problem, this was the solution I've found.

If you run brew doctor, it will tell you that probably you have installed something without brew that have changed the permissions on some folders, and so, you need to change permissions back to you on that folder.

Inside /usr/local/share/man, what you can do is the following:

sudo chown [yourusername] man7

And then:

brew link postgres

Hope it helps!

---

Similarly, after installing Mavericks 'bundle update' was throwing an error on the pg gem, which is only used on production and not locally.

I use Brew to manage my packages and postgresql was already installed, but still I was getting the 'no pg_config' error.

The fix was to just 'brew uninstall postgresql', then 'brew install postgresql'. After which I was immediately able to successfully run 'bundle update'

---

Postgres 9.4:

gem install pg -- --with-pg-config=/Applications/Postgres93.app/Contents/Versions/9.4/bin/pg_config

---

sudo su 

then

ARCHFLAGS="-arch x86_64" gem install pg -v '0.18'

worked on 10.10.2

---

If after trying everything here it still won't install, try opening Xcode and accepting the license agreement.

---