Earn money efficiently, follow up more than 10+platforms outsourcing needs in one stop

All Filters

Clear Data

Total of 99931 records

280.0 GBP
We are creating landing pages for high search volume locations across the UK in order to target local keyword searches. This will enable us to directly target cities with solar specific pages, optimised accordingly for each city. Here is an example of a solar company that ranks #1 for “solar panels manchester” this is a popular high purchase intent keyword that has ranked with a pretty basic page. https://www.geogreenpower.com/contact/manchester/#/ https://www.ecorenewablesgroup.co.uk/solar-panels-manchester/ The headers will look something like this for our article: - Short introduction to solar discussing the area in which we are targeting - Discussing the general benefits of solar - Solar panels maintenance - Our process - similar to what eco renewables have but more detailed - Information specific to each city Further information will be provided in the brief upon request... In terms of pricing: I have priced this at £35 per page as we are looking for a skilled native UK writer.
Writing & Translation peopleperhour Overseas
640 days ago
75.0 USD
Hi, Attached is the design / pattern we kindly ask from you to make, then apply on 24 pcs porcelainware shapes which I will supply to you in different dimensions. Think of a soup bowl, deep plate and big & small flat plates. In the past, it was ok to have exactly the same pattern on every piece, you might have seen such dinner sets, you may still see as well. But recently, the trend is to have assorted designes on different shapes. So our expectation is to use variations of the main pattern / design that you will generate based on the reference images that are attached. Sometimes, while making assortment, some plates might be so intense in design while some other is more minimal and relaxing. Please do attach, or send me the link of your portfolio related to what I ask in this inquiry. Hoping to work with you soon. Thanks.
Design peopleperhour Overseas
640 days ago
350.0 EUR
Objective: To design and develop a website for a label company that provides detailed information about the company's products and services, including label printers, labelling software, thermal transfer ribbon, maintenance and installation, label rewinds, barcode verifiers, and colour label printers. Scope: The website should include the following pages: Home page: This page should provide a brief overview of the company and its products and services, as well as the company's mission statement and contact information. It should also include links to the company's social media profiles and a blog/news section. Label printers page: This page should provide detailed information about the label printers offered by the company, including features, technical specifications, customer reviews, and images and videos demonstrating the use of the printers. Labelling software page: This page should provide detailed information about the labelling software offered by the company, including features, technical specifications, customer reviews, and images and videos demonstrating the use of the software. Thermal transfer ribbon page: This page should provide detailed information about the thermal transfer ribbon offered by the company, including features, technical specifications, customer reviews, and images and videos demonstrating the use of the ribbon. Maintenance and installation page: This page should provide information about the maintenance and installation services offered by the company, including details on the types of services offered and availability, as well as customer reviews. Label rewinds page: This page should provide detailed information about the label rewinds offered by the company, including features, technical specifications, customer reviews, and images and videos demonstrating the use of the rewinds. Barcode verifiers page: This page should provide detailed information about the barcode verifiers offered by the company, including features, technical specifications, customer reviews, and images and videos demonstrating the use of the verifiers. Colour label printers page: This page should provide detailed information about the colour label printers offered by the company, including features, technical specifications, customer reviews, and images and videos demonstrating the use of the printers. Blog/news page: This page should feature a regularly updated blog or news section, where the company can post updates, industry news, and other relevant information. The website should be visually appealing, easy to navigate, and informative, providing potential customers with all the information they need to make informed purchasing decisions. It should also include links to the company's social media profiles, such as Twitter and LinkedIn. Deliverables: The final deliverable for this project will be a fully functional and visually appealing website that meets all the requirements outlined above. This will include all necessary HTML, CSS, and JavaScript files, as well as any necessary graphics and media assets. The website should be tested and optimized for performance, and should be ready for deployment to a live server.
Design peopleperhour Overseas
640 days ago
45.0 GBP
I need 6x blog briefs to be put together for clients in various industries. The process is very much a copy/paste task with a tiny bit of rewriting / tidying up involved. This particular project is for 6 briefs, but there will be much more - meaning there is an opportunity for repeat work on an ongoing basis if the quality of the briefs is up to scratch. Here is the process for the blog briefs: - Do research based on a blog title: You will need to carry out a google search of the blog title and open the top ranking sites. - Skim/read all the results and copy / paste the main points covered by the top ranking pages: To do this, simply copy and paste H2s/H3s etc and paragraphs from the articles, choosing the ones that you think are best for the brief. Make sure you copy content from a variety of sources. - Turn the paragraph content into more digestible bullet points: Simply break down the sentences by adding bullet points. This will make the brief easier to read. If any expert names / other company / other products are mentioned, make sure to remove these. - Arrange the content into a brief that flows: start off with an introduction section and then move onto the main points covered by the top ranking pages, in a way that is easy to read and makes sense. Make sure to add [H1] [H2] [H3] in front of each heading so that the client easily sees how the content is structured. - Rewrite the headings: Each H2 / H3 and subheadings should be unique and not directly copied from the sources (where possible). This is because, as opposed to the paragraph content, these will be used to create the titles in the actual blog post. - Add a few internal links to some of the client's products: for most briefs, you will find that several products can be linked. Check the client's website to find suitable products and then add these into the brief where suitable. If these can't be added naturally within the text, just add a CTA at the end of the brief. - Link to studies (if applicable): If there are any studies / research journals mentioned, make sure these are linked too. - Add and highlight the following sentence after each section: "Please write in your own words based on the bullet points, your own research, company perspective and tone of voice" - Check the word count: Make sure the word count is around 1000-1500 words. And that's it! Once you've done one you'll see that the process is very straightforward. I've attached a couple of sample brief so you can see what these should look like when finished. If you have any questions, don't hesitate to let me know.
Writing & Translation peopleperhour Overseas
640 days ago
500.0 GBP
We are looking for a freelancer to work with on an ongoing basis to build the FRONT END of our websites. We provide designs in Figma and will give guidance as to what we are expecting in terms of animations/parallax etc on the page. Each element will be built into its own pod, so we require each element to have its own scss I have attached an example of our Homepage, this will have interactive elements which can be explained if required. In order to be considered you MUST answer the following questions: What tech stack/tool chain do you use for building the FE? Do you use a task runner to compile FE assets, if so which? Do you use css, less or scss to create styling and why? How would you usually structure the FE source for a project? Do you prefer to use a package manager such as NPM for Javascript packages or prefer to add links and references to packages in the head/body of a page – and why? Do you use JQuery, if so how do you ensure multiple references don’t end up in the project when the client adds a snippet from a 3rd party? What is the most technically difficult project you have worked on? Why was it difficult? How did you resolve these difficulties? Do you currently have agency partnerships and if so, how long do these last in general? Have you ever had a problem with understanding the brief for a project, if so how did you overcome this? Have you ever taken on a project and found you were unable to achieve some of the requirements, if so how did you overcome this.
Technology & Programming peopleperhour Overseas
640 days ago
35.0 EUR
Description AlfaDocs, the first full blown Practice Management & Patient- Engagement Platform. In AlfaDocs you have the opportunity to greatly impact and truly improve the healthcare environment of doctors and patients: connecting them in a whole new way, with a software platform that changes everyday life in and around doctor’s practices. We are here to accomplish our mission by offering Software as a Service for digitalization, centralization, automation and integration. Since its launch in 2016 on the Italian market, our Munich and Milan-based teams have quickly grown the business to a solid customer base and raised several investments. As the leading solution for Practice Management & Patient-Engagement, we are looking for a Data Migration Specialist Freelance to join our growing Customer Success Team. Start Date: ASAP Mode: Full Remote Language: Italian and English As a freelancer, you will have a fixed contact person in AlfaDocs who coordinates all tasks with you. What will you do in your role? Perform data transfer from a PMS (Practice Management Software) to AlfaDocs Be in contact with the customer in order to effectively optimize the data transfer Maintenance of the integration interface between AlfaDocs and X-Ray diagnostic software Write code for the data migration and fix potential code issues test the system after the migration process find and fix any outstanding faults or issues with migrated data document the processes undertaken, any issues, and fixes that have been deployed Requirements Strong in logical thinking PHP programming knowledge (at least 2 years of experience) Basic Java programming knowledge (to fix small bugs in a Java tool) Deep knowledge of Windows operating system (for integrations) Soft skills for communication with clients Experience with relational database Fluent English & Italian Benefits During the initial phase of joining AlfaDocs, you will always be supported by a colleague responsible for your training and long-term success.
Technology & Programming peopleperhour Overseas
640 days ago
50.0 USD
I'm looking to upgrade my odoo server from V11 community to V16 community or enterprise
Technology & Programming peopleperhour Overseas
640 days ago
33.0 GBP
We are launching a new product to the UK market and need CADs designing for the website & brochure. Hushrooms provides modular easy to install outdoor space solutions. We have 2 product options with 3 types of each product based on size specification + the option to request a bespoke size. We are targeting both consumers and corporate customers with a requirement to create additional outdoor space solutions. See our use case document to show how the product can be used for our target audience. We have 2 product options which will come in 3 options each (based on size, doors and windows) with choice of 4 colours for each options. I have attached images of the 2 products we will launch (I can confirm size etc for each option under a product.) On the website the visitor will select a product and then go to the product page. From there they will select the size option they want and will be presented with the CAD for this option. They can then select a colour and the CAD will change to the colour selected. I need the CAD to be 3D so they can spin the CAD to see all sides. I also need them to get an internal view layout on each option.
Design peopleperhour Overseas
640 days ago

HuntsBot,a one-stop outsourcing task, remote job, product ideas sharing and subscription platform, which supports DingTalk, Lark, WeCom, Email and Telegram robot subscription. The platform will push outsourcing task requirements, remote work opportunities, product ideas to every subscribed user with timely, stable and reliable.

简体中文 English

Platform

Support

Contact US

Any questions or suggestions during use, you can contact us in the following ways:

Email: huntsbot@xinbeitime.com

Copyright© 2022-2023 www.huntsbot.com 浙ICP备2022000860号-4 All Rights Reserved.