ChatGPT解决这个技术问题 Extra ChatGPT

UTF-8 all the way through

I'm setting up a new server and want to support UTF-8 fully in my web application. I have tried this in the past on existing servers and always seem to end up having to fall back to ISO-8859-1.

Where exactly do I need to set the encoding/charsets? I'm aware that I need to configure Apache, MySQL, and PHP to do this — is there some standard checklist I can follow, or perhaps troubleshoot where the mismatches occur?

This is for a new Linux server, running MySQL 5, PHP, 5 and Apache 2.

Here's an introduction to encodings in general and encodings in PHP in particular: What Every Programmer Absolutely, Positively Needs To Know About Encodings And Character Sets To Work With Text
Some recent discussions about PHP 7 indicate that there are no changes in the "officially abandoned" position of 2010... There are something more about "PHP7 and UTF-8"?
This problem is common. But there is no shortcut solution, you will have to setup utf-8 for each of them seprately - MySQL 5, PHP 5 OR Apache 2.
The timezone of the database server is also an important setting to choose. I recommend to use UTC (`set time_zone='+0:00`` for MySQL) as the server default.

Y
Your Common Sense

Data Storage:

Specify the utf8mb4 character set on all tables and text columns in your database. This makes MySQL physically store and retrieve values encoded natively in UTF-8. Note that MySQL will implicitly use utf8mb4 encoding if a utf8mb4_* collation is specified (without any explicit character set).

In older versions of MySQL (< 5.5.3), you'll unfortunately be forced to use simply utf8, which only supports a subset of Unicode characters. I wish I were kidding.

Data Access:

In your application code (e.g. PHP), in whatever DB access method you use, you'll need to set the connection charset to utf8mb4. This way, MySQL does no conversion from its native UTF-8 when it hands data off to your application and vice versa.

Some drivers provide their own mechanism for configuring the connection character set, which both updates its own internal state and informs MySQL of the encoding to be used on the connection—this is usually the preferred approach. In PHP: If you're using the PDO abstraction layer with PHP ≥ 5.3.6, you can specify charset in the DSN: $dbh = new PDO('mysql:charset=utf8mb4'); If you're using mysqli, you can call set_charset(): $mysqli->set_charset('utf8mb4'); // object oriented style mysqli_set_charset($link, 'utf8mb4'); // procedural style If you're stuck with plain mysql but happen to be running PHP ≥ 5.2.3, you can call mysql_set_charset.

If you're using the PDO abstraction layer with PHP ≥ 5.3.6, you can specify charset in the DSN: $dbh = new PDO('mysql:charset=utf8mb4');

If you're using mysqli, you can call set_charset(): $mysqli->set_charset('utf8mb4'); // object oriented style mysqli_set_charset($link, 'utf8mb4'); // procedural style

If you're stuck with plain mysql but happen to be running PHP ≥ 5.2.3, you can call mysql_set_charset.

If the driver does not provide its own mechanism for setting the connection character set, you may have to issue a query to tell MySQL how your application expects data on the connection to be encoded: SET NAMES 'utf8mb4'.

The same consideration regarding utf8mb4/utf8 applies as above.

Output:

UTF-8 should be set in the HTTP header, such as Content-Type: text/html; charset=utf-8. You can achieve that either by setting default_charset in php.ini (preferred), or manually using header() function.

If your application transmits text to other systems, they will also need to be informed of the character encoding. With web applications, the browser must be informed of the encoding in which data is sent (through HTTP response headers or HTML metadata).

When encoding the output using json_encode(), add JSON_UNESCAPED_UNICODE as a second parameter.

Input:

Browsers will submit data in the character set specified for the document, hence nothing particular has to be done on the input.

In case you have doubts about request encoding (in case it could be tampered with), you may verify every received string as being valid UTF-8 before you try to store it or use it anywhere. PHP's mb_check_encoding() does the trick, but you have to use it religiously. There's really no way around this, as malicious clients can submit data in whatever encoding they want, and I haven't found a trick to get PHP to do this for you reliably.

Other Code Considerations:

Obviously enough, all files you'll be serving (PHP, HTML, JavaScript, etc.) should be encoded in valid UTF-8.

You need to make sure that every time you process a UTF-8 string, you do so safely. This is, unfortunately, the hard part. You'll probably want to make extensive use of PHP's mbstring extension.

PHP's built-in string operations are not by default UTF-8 safe. There are some things you can safely do with normal PHP string operations (like concatenation), but for most things you should use the equivalent mbstring function.

To know what you're doing (read: not mess it up), you really need to know UTF-8 and how it works on the lowest possible level. Check out any of the links from utf8.com for some good resources to learn everything you need to know.


I'm not wrong: COLLATE implies CHARACTER SET. See e.g. dev.mysql.com/doc/refman/5.0/en/charset-database.html.
Note that MySQL does not speak the same language as everyone else. When MySQL says "utf8" it really means "some weirdly retarded variant of UTF-8 that is limited to three bytes for god knows what ridiculous reason". If you really want UTF-8 you should tell MySQL that you want this weird thing MySQL likes to call utf8mb4. Don't bother saving on the "WTF!"s.
@chazomaticus do you think I should user mbstring even for English....or strlen will suffice? What about Greek?
C
Community

I'd like to add one thing to chazomaticus' excellent answer:

Don't forget the META tag either (like this, or the HTML4 or XHTML version of it):

<meta charset="utf-8">

That seems trivial, but IE7 has given me problems with that before.

I was doing everything right; the database, database connection and Content-Type HTTP header were all set to UTF-8, and it worked fine in all other browsers, but Internet Explorer still insisted on using the "Western European" encoding.

It turned out the page was missing the META tag. Adding that solved the problem.

Edit:

The W3C actually has a rather large section dedicated to I18N. They have a number of articles related to this issue – describing the HTTP, (X)HTML and CSS side of things:

FAQ: Changing (X)HTML page encoding to UTF-8

Declaring character encodings in HTML

Tutorial: Character sets & encodings in XHTML, HTML and CSS

Setting the HTTP charset parameter

They recommend using both the HTTP header and HTML meta tag (or XML declaration in case of XHTML served as XML).


P
Peter Mortensen

In addition to setting default_charset in php.ini, you can send the correct charset using header() from within your code, before any output:

header('Content-Type: text/html; charset=utf-8');

Working with Unicode in PHP is easy as long as you realize that most of the string functions don't work with Unicode, and some might mangle strings completely. PHP considers "characters" to be 1 byte long. Sometimes this is okay (for example, explode() only looks for a byte sequence and uses it as a separator -- so it doesn't matter what actual characters you look for). But other times, when the function is actually designed to work on characters, PHP has no idea that your text has multi-byte characters that are found with Unicode.

A good library to check into is phputf8. This rewrites all of the "bad" functions so you can safely work on UTF8 strings. There are extensions like the mb_string extension that try to do this for you, too, but I prefer using the library because it's more portable (but I write mass-market products, so that's important for me). But phputf8 can use mb_string behind the scenes, anyway, to increase performance.


P
Peter Mortensen

Warning: This answer applies to PHP 5.3.5 and lower. Do not use it for PHP version 5.3.6 (released in March 2011) or later. Compare with Palec's answer to PDO + MySQL and broken UTF-8 encoding.

I found an issue with someone using PDO and the answer was to use this for the PDO connection string:

$pdo = new PDO(
    'mysql:host=mysql.example.com;dbname=example_db',
    "username",
    "password",
    array(PDO::MYSQL_ATTR_INIT_COMMAND => "SET NAMES utf8"));

Looking for this a bit further, this is only necessary for PHP versions prior to 5.3.6. See also: http://stackoverflow.com/a/4361485/2286722 (although they use a separate $dbh->exec("set names utf8");; I do prefer the method presented here). Btw. there is also a similar note on this as a comment in the PHP manual: php.net/manual/en/pdo.construct.php#96325.
P
Peter Mortensen

In my case, I was using mb_split, which uses regular expressions. Therefore I also had to manually make sure the regular expression encoding was UTF-8 by doing mb_regex_encoding('UTF-8');

As a side note, I also discovered by running mb_internal_encoding() that the internal encoding wasn't UTF-8, and I changed that by running mb_internal_encoding("UTF-8");.


P
Peter Mortensen

First of all, if you are in PHP before 5.3 then no. You've got a ton of problems to tackle.

I am surprised that none has mentioned the intl library, the one that has good support for Unicode, graphemes, string operations, localisation and many more, see below.

I will quote some information about Unicode support in PHP by Elizabeth Smith's slides at PHPBenelux'14

INTL

Good:

Wrapper around ICU library

Standardised locales, set locale per script

Number formatting

Currency formatting

Message formatting (replaces gettext)

Calendars, dates, time zone and time

Transliterator

Spoofchecker

Resource bundles

Convertors

IDN support

Graphemes

Collation

Iterators

Bad:

Does not support zend_multibyte

Does not support HTTP input output conversion

Does not support function overloading

mb_string

Enables zend_multibyte support

Supports transparent HTTP in/out encoding

Provides some wrappers for functionality such as strtoupper

ICONV

Primary for charset conversion

Output buffer handler

mime encoding functionality

conversion

some string helpers (len, substr, strpos, strrpos)

Stream Filter stream_filter_append($fp, 'convert.iconv.ISO-2022-JP/EUC-JP')

DATABASES

MySQL: Charset and collation on tables and on the connection (not the collation). Also, don't use mysql - mysqli or PDO

postgresql: pg_set_client_encoding

sqlite(3): Make sure it was compiled with Unicode and intl support

Some other gotchas

You cannot use Unicode filenames with PHP and windows unless you use a 3rd part extension.

Send everything in ASCII if you are using exec, proc_open and other command line calls

Plain text is not plain text, files have encodings

You can convert files on the fly with the iconv filter


Yes, right. Mysqli and PDO can use their native drivers. Also they can use mysqlnd driver if you will compile php with --with-mysqli=mysqlnd --with-pdo-mysql=mysqlnd options.
P
Peter Mortensen

The only thing I would add to these amazing answers is to emphasize on saving your files in UTF-8 encoding, I have noticed that browsers accept this property over setting UTF-8 as your code encoding. Any decent text editor will show you this. For example, Notepad++ has a menu option for file encoding, and it shows you the current encoding and enables you to change it. For all my PHP files I use UTF-8 without a BOM.

Sometime ago I had someone ask me to add UTF-8 support for a PHP and MySQL application designed by someone else. I noticed that all files were encoded in ANSI, so I had to use iconv to convert all files, change the database tables to use the UTF-8 character set and utf8_general_ci collate, add 'SET NAMES utf8' to the database abstraction layer after the connection (if using 5.3.6 or earlier. Otherwise, you have to use charset=utf8 in the connection string) and change string functions to use the PHP multibyte string functions equivalent.


M
Martin

I recently discovered that using strtolower() can cause issues where the data is truncated after a special character.

The solution was to use

mb_strtolower($string, 'UTF-8');

mb_ uses MultiByte. It supports more characters but in general is a little slower.


J
JW.

In PHP, you'll need to either use the multibyte functions, or turn on mbstring.func_overload. That way things like strlen will work if you have characters that take more than one byte.

You'll also need to identify the character set of your responses. You can either use AddDefaultCharset, as above, or write PHP code that returns the header. (Or you can add a META tag to your HTML documents.)


Great tip about the func_overload setting - allows for minimal modification to existing code.
Just be careful -- some code might actually be relying on the one-byte-per-character nature of the standard string functions.
Important to note that the mbstring.func_overload feature is being deprecated as of PHP 7.2, due to the issues noted in @JW's comment above. So the best advice is: Yes you should definitely use the mbstring functions, but don't use the overload feature to get the standard functions to work as multibyte.
P
Peter Mortensen

I have just gone through the same issue and found a good solution at PHP manuals.

I changed all my files' encoding to UTF8 and then the default encoding on my connection. This solved all the problems.

if (!$mysqli->set_charset("utf8")) {
    printf("Error loading character set utf8: %s\n", $mysqli->error);
} else {
   printf("Current character set: %s\n", $mysqli->character_set_name());
}

View Source


I spent an hour trying to figure out an encoding problem on a page I'm working on and I'm usually pretty good at figuring out stuff. I always consult this page and your answer helped me a lot. Got my upvote. In my case, set_charset('utf8mb4') did not work but >set_charset("utf8") did and that wasn't actually shown in the other answers.
@FunkFortyNiner Beware: set_charset("utf8") may work but will behave differently (see the remarks about the difference between utf8 and utf8mb4 and the mysql version history). Use utf8 if you have to AND ONLY if you know what you're doing!
5 stars solution, I was reading a text file line by line and getting ? for each character, then I did save-as , instead of ansi, used utf8. thanks.
utf8mb4 is the charset to use.
P
Peter Mortensen

Unicode support in PHP is still a huge mess. While it's capable of converting an ISO 8859 string (which it uses internally) to UTF-8, it lacks the capability to work with Unicode strings natively, which means all the string processing functions will mangle and corrupt your strings.

So you have to either use a separate library for proper UTF-8 support, or rewrite all the string handling functions yourself.

The easy part is just specifying the charset in HTTP headers and in the database and such, but none of that matters if your PHP code doesn't output valid UTF-8. That's the hard part, and PHP gives you virtually no help there. (I think PHP 6 is supposed to fix the worst of this, but that's still a while away.)


P
Peter Mortensen

If you want a MySQL server to decide the character set, and not PHP as a client (old behaviour; preferred, in my opinion), try adding skip-character-set-client-handshake to your my.cnf, under [mysqld], and restart mysql.

This may cause trouble in case you're using anything other than UTF-8.


P
Peter Mortensen

The top answer is excellent. Here is what I had to on a regular Debian, PHP, and MySQL setup:

// Storage
// Debian. Apparently already UTF-8

// Retrieval
// The MySQL database was stored in UTF-8,
// but apparently PHP was requesting ISO 8859-1. This worked:
// ***notice "utf8", without dash, this is a MySQL encoding***
mysql_set_charset('utf8');

// Delivery
// File *php.ini* did not have a default charset,
// (it was commented out, shared host) and
// no HTTP encoding was specified in the Apache headers.
// This made Apache send out a UTF-8 header
// (and perhaps made PHP actually send out UTF-8)
// ***notice "utf-8", with dash, this is a php encoding***
ini_set('default_charset','utf-8');

// Submission
// This worked in all major browsers once Apache
// was sending out the UTF-8 header. I didn’t add
// the accept-charset attribute.

// Processing
// Changed a few commands in PHP, like substr(),
// to mb_substr()

That was all!


utf8mb4 is the charset to use for MySQL.