How does Java Garbage Collection work with Circular References?
From my understanding, garbage collection in Java cleans up some objects if nothing else is 'pointing' to that object.
My question is, what happens if we have something like this:
class Node {
public object value;
public Node next;
public Node(object o, Node n) { value = 0; next = n;}
}
//...some code
{
Node a = new Node("a", null),
b = new Node("b", a),
c = new Node("c", b);
a.next = c;
} //end of scope
//...other code
a, b, and c should be garbage collected, but they are all being referenced by other objects.
How does the Java garbage collection deal with this? (or is it simply a memory drain?)
Java's GC considers objects "garbage" if they aren't reachable through a chain starting at a garbage collection root, so these objects will be collected. Even though objects may point to each other to form a cycle, they're still garbage if they're cut off from the root.
See the section on unreachable objects in Appendix A: The Truth About Garbage Collection in Java Platform Performance: Strategies and Tactics for the gory details.
yes Java Garbage collector handles circular-reference!
How?
There are special objects called called garbage-collection roots (GC roots). These are always reachable and so is any object that has them at its own root.
A simple Java application has the following GC roots:
Local variables in the main method The main thread Static variables of the main class
https://i.stack.imgur.com/IjZqR.png
To determine which objects are no longer in use, the JVM intermittently runs what is very aptly called a mark-and-sweep algorithm. It works as follows
The algorithm traverses all object references, starting with the GC roots, and marks every object found as alive. All of the heap memory that is not occupied by marked objects is reclaimed. It is simply marked as free, essentially swept free of unused objects.
So if any object is not reachable from the GC roots(even if it is self-referenced or cyclic-referenced) it will be subjected to garbage collection.
Ofcourse sometimes this may led to memory leak if programmer forgets to dereference an object.
https://i.stack.imgur.com/SZh5r.png
Source : Java Memory Management
You are correct. The specific form of garbage collection you describe is called "reference counting". The way it works (conceptually, at least, most modern implementations of reference counting are actually implemented quite differently) in the simplest case, looks like this:
whenever a reference to an object is added (e.g. it is assigned to a variable or a field, passed to method, and so on), its reference count is increased by 1
whenever a reference to an object is removed (the method returns, the variable goes out of scope, the field is re-assigned to a different object or the object which contains the field gets itself garbage collected), the reference count is decreased by 1
as soon as the reference count hits 0, there is no more reference to the object, which means nobody can use it anymore, therefore it is garbage and can be collected
And this simple strategy has exactly the problem you decribe: if A references B and B references A, then both of their reference counts can never be less than 1, which means they will never get collected.
There are four ways to deal with this problem:
Ignore it. If you have enough memory, your cycles are small and infrequent and your runtime is short, maybe you can get away with simply not collecting cycles. Think of a shell script interpreter: shell scripts typically only run for a few seconds and don't allocate much memory. Combine your reference counting garbage collector with another garbage collector which doesn't have problems with cycles. CPython does this, for example: the main garbage collector in CPython is a reference counting collector, but from time to time a tracing garbage collector is run to collect the cycles. Detect the cycles. Unfortunately, detecting cycles in a graph is a rather expensive operation. In particular, it requires pretty much the same overhead that a tracing collector would, so you could just as well use one of those. Don't implement the algorithm in the naive way you and I would: since the 1970s, there have been multiple quite interesting algorithms developed that combine cycle detection and reference counting in a single operation in a clever way that is significantly cheaper than either doing them both seperately or doing a tracing collector.
By the way, the other major way to implement a garbage collector (and I have already hinted at that a couple of times above), is tracing. A tracing collector is based on the concept of reachability. You start out with some root set that you know is always reachable (global constants, for example, or the Object class, the current lexical scope, the current stack frame) and from there you trace all objects that are reachable from the root set, then all objects that are reachable from the objects reachable from the root set and so on, until you have the transitive closure. Everything that is not in that closure is garbage.
Since a cycle is only reachable within itself, but not reachable from the root set, it will be collected.
A garbage collector starts from some "root" set of places that are always considered "reachable", such as the CPU registers, stack, and global variables. It works by finding any pointers in those areas, and recursively finding everything they point at. Once it's found all that, everything else is garbage.
There are, of course, quite a few variations, mostly for the sake of speed. For example, most modern garbage collectors are "generational", meaning that they divide objects into generations, and as an object gets older, the garbage collector goes longer and longer between times that it tries to figure out whether that object is still valid or not -- it just starts to assume that if it has lived a long time, chances are pretty good that it'll continue to live even longer.
Nonetheless, the basic idea remains the same: it's all based on starting from some root set of things that it takes for granted could still be used, and then chasing all the pointers to find what else could be in use.
Interesting aside: may people are often surprised by the degree of similarity between this part of a garbage collector and code for marshaling objects for things like remote procedure calls. In each case, you're starting from some root set of objects, and chasing pointers to find all the other objects those refer to...
The Java GCs don't actually behave as you describe. It's more accurate to say that they start from a base set of objects, frequently called "GC roots", and will collect any object that can not be reached from a root. GC roots include things like:
static variables
local variables (including all applicable 'this' references) currently in the stack of a running thread
So, in your case, once the local variables a, b, and c go out of scope at the end of your method, there are no more GC roots that contain, directly or indirectly, a reference to any of your three nodes, and they'll be eligible for garbage collection.
TofuBeer's link has more detail if you want it.
This article (no longer available) goes into depth about the garbage collector (conceptually... there are several implementations). The relevant part to your post is "A.3.4 Unreachable":
A.3.4 Unreachable An object enters an unreachable state when no more strong references to it exist. When an object is unreachable, it is a candidate for collection. Note the wording: Just because an object is a candidate for collection doesn't mean it will be immediately collected. The JVM is free to delay collection until there is an immediate need for the memory being consumed by the object.
Garbage collection doesn't usually mean "clean some object iff nothing else is 'pointing' to that object" (that's reference counting). Garbage collection roughly means finding objects that can't be reached from the program.
So in your example, after a,b, and c go out of scope, they can be collected by the GC, since you can't access these objects anymore.
Bill answered your question directly. As Amnon said, your definition of garbage collection is just reference counting. I just wanted to add that even very simple algorithms like mark and sweep and copy collection easily handle circular references. So, nothing magic about it!
GC starts marking by is used flag from roots(seeds) which are stack or permanent. All others references are not taking into account.
Retain cycle[About](Circular References) for iOS is a situation where you are(as a developer) is responsible for counting references and deallocating them
Follow WeChat
Success story sharing
Want to stay one step ahead of the latest teleworks?
Subscribe Now相似问题
- How do I efficiently iterate over each entry in a Java Map?
- Does a finally block always get executed in Java?
- How does the Java 'for each' loop work?
- How do I call one constructor from another in Java?
- How do I read / convert an InputStream into a String in Java?
- How do I generate random integers within a specific range in Java?
- Does Java support default parameter values?
- How do I declare and initialize an array in Java?
- How do I convert a String to an int in Java?
