Docker command can't connect to Docker daemon

You need to add your current user to the docker group as follows:

sudo usermod -aG docker $(whoami)

then logout & login again into the system or restart the system. test by docker version

for further info how to install docker-engine follow docker documentation

---

Add the user to the docker group

Add the docker group if it doesn't already exist: sudo groupadd docker

Add the connected user "${USER}" to the docker group: sudo gpasswd -a ${USER} docker

Restart the Docker daemon: sudo service docker restart

Either do a newgrp docker or log out/in to activate the changes to groups.

---

Usually, the following command does the trick:

sudo service docker restart

This, instead of docker start for the cases where Docker seems to already be running.

If that works then, as suggested and in another answer and on this GitHub issue, if you haven't added yourself in the docker group do it by running:

sudo usermod -aG docker <your-username> 

And you're most likely good to go.

As for anybody else bumping into this, in some OS's docker doesn't start right after you install it and, as a result, the same can't connect to daemon message appears. In this case you can first verify that Docker is indeed not running by checking the status of your docker service by executing:

sudo service docker status

If the output looks something like: docker stop/waiting instead of docker start/running, process 15378 then it obviously means Docker is not active. In this case make sure you start it with:

sudo service docker start

And, as before, you'll most likely be good to go.

---

note to self: I get the error from the question's title when I forget to run docker command with sudo:

sudo docker run ...

[Ubuntu 15.10]

---

Had the same issue and what worked for me was: Checking the ownership of /var/run/docker.sock

ls -l /var/run/docker.sock

If you're not the owner then change ownership with the command

sudo chown *your-username* /var/run/docker.sock

Then you can go ahead and try executing the docker commands hassle-free :D

---

After installing docker on Ubuntu, I ran the following command:

sudo service docker start

Have you tried it?

---

After install everything and start the service, try close your terminal and open it again, then try pull your image

Edit

I also had this issue again, if the solution above won't worked, try this solution that is the command bellow

sudo mv /var/lib/docker/network/files/ /tmp/dn-bak

Considerations

If command above works you probably are with network docker problems, anyway this resolves it, to confirm that, see the log with the command bellow

tail -5f /var/log/upstart/docker.log

If the output have something like that

FATA[0000] Error starting daemon: Error initializing network controller: could not delete the default bridge network: network bridge has active endpoints 
/var/run/docker.sock is up

You really are with network problems, however I do not know yet if the next time you restart(update, 2 months no issue again) your OS will get this problem again and if it is a bug or installation problem

My docker version

Client:
 Version:      1.9.1
 API version:  1.21
 Go version:   go1.4.2
 Git commit:   a34a1d5
 Built:        Fri Nov 20 13:12:04 UTC 2015
 OS/Arch:      linux/amd64

Server:
 Version:      1.9.1
 API version:  1.21
 Go version:   go1.4.2
 Git commit:   a34a1d5
 Built:        Fri Nov 20 13:12:04 UTC 2015
 OS/Arch:      linux/amd64

---

I had the same problem. Been struggling for two days to solve it.

It only worked when I did:

According to Docker's Tutorial, you need to add the Docker key if not already added using: $ sudo wget -qO- https://get.docker.com/gpg | sudo apt-key add - Then make sure you grant docker privileges to yourself using: $ sudo usermod -aG docker $USER

Hope this helps you too.

---

enter as root (sudo su) and try this:

unset DOCKER_HOST
docker run --name mynginx1 -P -d nginx

I've the same problem here, and the docker command only worked running as root, and also with this DOCKER_HOST empty

PS: also beware that the correct and official way to install on Ubuntu is to use their apt repositories (even on 15.10), not with that "wget" thing.

---

For OSX:

After opening docker and starting the 'default' machine via the Quickstart Terminal (https://docs.docker.com/engine/installation/mac/), you try docker commands and get this "can't connect to docker daemon" message, it turns out you need some env variables set:

eval "$(docker-machine env default)"

Then try it out with docker run hello-world to see if everything is peachy.

---

For the ones who already tried restarting your machine, unsetting the environment variable DOCKER_HOST as told in the docker env documentation and all the rest just try to go with the

sudo service docker restart

Only this did the trick for me even after restarting the machine.

---

Giving non-root access - from docker

Add the docker group if it doesn't already exist.

$ sudo groupadd docker

Add the connected user "${USER}" to the docker group.

Change the user name to match your preferred user.

You may have to logout and log back in again for this to take effect.

$ sudo gpasswd -a ${USER} docker

Restart the Docker daemon.

$ sudo service docker restart

---

This question is currently number 3 on a Google search. After doing some research into solving this problem on my Linux system I thought I would write this answer. The original post states the problem is on Ubuntu but I also experienced the issue using Fedora. With that in mind, here is what I did to fix the problem.

On Fedora 22

Installing Docker:

$> curl -fsSL https://get.docker.com/ | sh

After installing Docker:

A user needs to be added to the docker group.

$> sudo usermod -aG docker

The docker daemon needs to be started

$> sudo service docker start

You can set the daemon to start at boot

$> sudo chkconfig docker on

You can verify the docker service is running

$> service docker status

And one last final check

$> docker run hello-world

---

Tested in Ubuntu 16.04

# Create the docker group and add your user to the docker group
groupadd docker
usermod -aG docker $USER
newgrp docker

# Configure docker service to be exposed
mkdir -p /etc/systemd/system/docker.service.d
echo -e '[Service]\nExecStart=\nExecStart=/usr/bin/dockerd -H fd:// -H tcp://0.0.0.0:2376' >> /etc/systemd/system/docker.service.d/override.conf

# restart service
systemctl daemon-reload
service docker restart

---

Try to use "sudo" with the command you are running.

---

I have same issue while running docker.

you can run commands as sudo user:

sudo docker ***your command here***

---

For Ubuntu: Happened with me when I updated docker. You need to unmask the service and socket and then restart the service. Following worked for me:

systemctl unmask docker.service
systemctl unmask docker.socket
systemctl start docker.service

What happend behind the scenes systemd also has the ability to mark a unit as completely unstartable, automatically or manually, by linking it to /dev/null. This is called masking the unit, and is possible with the mask command.

sudo systemctl mask docker.service

You can check the list of masked services using:

sudo systemctl list-unit-files

https://i.stack.imgur.com/LTIHj.png

To enable auto/manual start of service you need to unmask it using:

sudo sytemctl unmask docker.service

https://i.stack.imgur.com/R6Rza.png

---

As docker binds to a unix socket which is owned by root while starting up, using 'sudo' along with the docker commands will work.

---

I also had the same issue. The problem was in sockets allocated to docker-daemon and docker-client. First, permission was not set for the docker-client on docker.sock You can set it using "sudo usermod -aG docker $USER" Then check your bash file where the docker-client is running, For me it was on 0.0.0.0:2375, while docker-daemon was running on unix socket.(It was set in the configuration file of dockerd). Just comment the bash-line and it'll work fine. But if you want to make it work on TCP port instead of unix socket, change the configuration file of dockerd and set it on 0.0.0.0.2375 and keep the line in bash as it is if present or set it to 0.0.0.0:2375.

---

Perhaps this will help someone, as the error message is extremely unhelpful, and I had gone through all of the standard permission steps numerous times to no avail.

Docker occasionally leaves ghost environment variables in place that block access, despite your system otherwise being correctly set up. The following shell commands may make it accessible again, if you have had it running at one point and it just stopped cooperating after a reboot:

unset DOCKER_HOST
unset DOCKER_TLS_VERIFY
unset DOCKER_TLS_PATH
docker ps

I had a previously working docker install, and after rebooting my laptop it simply refused to work. Was correctly added to the docker user group, had the correct permissions on the socket, etc, but could still not run docker login, docker run ..., etc. This fixed it for me. Unfortunately I have to run this on each reboot. This is mentioned on a couple of github issues also as a workaround, although it seems like a bug that this is a persistent barrier to correct operation of Docker (note: I am on Arch Linux, not OSX, but this was the same issue for me).

---

I was able to fix that by running the following command:

sudo mv /var/lib/dpkg/info/docker-ce* /tmp

---

I have faced same error on Amazon EC2 instance. The issue got fixed after restarting the instance.

---

Add current user to docker group:

sudo usermod -aG docker $(whoami)

---

For Ubuntu 16.04

Inside file /lib/systemd/system/docker.service change:

ExecStart=/usr/bin/dockerd fd://

with:

ExecStart=/usr/bin/dockerd -H tcp://0.0.0.0:2375

Inside file /etc/init.d/docker change:

DOCKER_OPTS=

with:

DOCKER_OPTS="-H tcp://0.0.0.0:2375"

and then restart your computer.

---